Export limit exceeded: 15843 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15843 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-109827 | 1 Gpac | 1 Gpac | 2026-10-15 | 6.3 Medium |
| A vulnerability has been found in GPAC up to 26.07.0. This vulnerability affects the function gf_m2ts_decode_ait of the file src/media_tools/ait.c of the component AIT Parser. Such manipulation leads to out-of-bounds write. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The name of the patch is 6d2c21a1a688abb20d0111b608db3b6f44d348f4. Applying a patch is advised to resolve this issue. | ||||
| CVE-2026-107909 | 1 Falkordb | 1 Falkordb | 2026-10-15 | 9.1 Critical |
| A heap-based out-of-bounds write in the ws_read_frame function (src/bolt/ws.c) and the buffer_apply_mask function (src/bolt/buffer.c) in FalkorDB before 4.20.0 allows a remote unauthenticated attacker to cause a denial of service and possibly corrupt heap memory by sending a WebSocket frame with a 64-bit extended payload length to the Bolt port. The payload length is not bounded, and the only bounds check in buffer_apply_mask is an ASSERT(), which is compiled out in release builds, so the function XORs memory beyond the end of the receive buffer with the attacker-supplied mask key. Only deployments that enable the Bolt endpoint (BOLT_PORT, disabled by default) are affected. | ||||
| CVE-2026-107908 | 1 Falkordb | 1 Falkordb | 2026-10-15 | 9.8 Critical |
| A heap-based out-of-bounds write in the BoltReadHandler function (src/bolt/bolt_api.c) in FalkorDB before 4.20.0 allows a remote unauthenticated attacker to cause a denial of service and possibly execute arbitrary code by sending a Bolt RESET message with an attacker-chosen chunk size to the Bolt port. The handler checks the size only with ASSERT(), which is compiled out in release builds, then computes a destination pointer from the wire-supplied 16-bit size and moves buffered data up to about 64 KiB backwards past the start of the read buffer. Only deployments that enable the Bolt endpoint (BOLT_PORT, disabled by default) are affected. | ||||
| CVE-2026-100231 | 1 Redhat | 1 Enterprise Linux | 2026-10-15 | 6.1 Medium |
| A flaw was found in the GStreamer multimedia framework's ASF muxer plugin (asfmux). When writing string metadata tags containing Unicode characters outside the Basic Multilingual Plane (such as emoji) to an ASF container, the plugin incorrectly calculates the buffer size needed for the UTF-16LE representation. The size calculation assumes each Unicode code point requires 2 bytes, but non-BMP characters require 4 bytes (surrogate pairs). This leads to a heap out-of-bounds write when the actual UTF-16LE conversion is written into the undersized buffer. An attacker could exploit this by providing media with crafted metadata tags to an application that transcodes or remuxes to ASF format while preserving metadata, potentially causing a denial of service or limited memory corruption. | ||||
| CVE-2026-103226 | 1 Artifex | 1 Ghostscript | 2026-10-15 | 6.3 Medium |
| A vulnerability was identified in Artifex Ghostscript up to 10.07.0. Affected is the function type1_callsubr of the file devices/vector/gdevpsfx.c of the component Pdfwrite. The manipulation leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. Upgrading to version 10.08.0 is able to address this issue. It is suggested to upgrade the affected component. A solution was implemented: "I've chosen to fix this slightly differently by using the defined macro in the font parsing loop rather than in the callsubr function, because this better matches the pattern of 'normal' usage." | ||||
| CVE-2026-86856 | 1 Redhat | 3 Enterprise Linux, Openshift, Openstack | 2026-10-15 | 6.5 Medium |
| A flaw was found in the DPDK nfp vDPA driver. Stack and heap buffers sized for a single queue pair can be overflowed when more virtqueues are configured, leading to a host crash or memory corruption. | ||||
| CVE-2026-91811 | 4 Apple, Foxit, Foxitsoftware and 1 more | 6 Macos, Pdf Editor, Pdf Reader and 3 more | 2026-10-15 | 7.8 High |
| A heap-based out-of-bounds write vulnerability exists in Foxit PDF Editor/Reader’s PRC parser due to insufficient validation of vertex indices in triangular fan texture meshes. Successful exploitation could result in memory corruption and an application crash. | ||||
| CVE-2026-98057 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Add checking nr_subbufs to persistent ring buffer validation Sashiko reported that the code was using meta->nr_subbufs without making sure that it matched the nr_pages + 1 on data that was assuming the two were the same. Add a check to the persistent ring buffer validation code to make sure that the saved nr_subbufs matches what we expect. | ||||
| CVE-2026-93164 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Move optimized uprobe from nop5 to nop10 Andrii reported an issue with optimized uprobes [1] that can clobber redzone area with call instruction storing return address on stack where user code may keep temporary data without adjusting rsp. Fixing this by moving the optimized uprobes on top of 10-bytes nop instruction, so we can squeeze another instruction to escape the redzone area before doing the call, like: lea -0x80(%rsp), %rsp call tramp Note the lea instruction is used to adjust the rsp register without changing the flags. We use nop10 and following transformation to optimized instructions above and back as suggested by Peterz [2]. Optimize path (int3_update_optimize): 1) Initial state after set_swbp() installed the uprobe: cc 2e 0f 1f 84 00 00 00 00 00 From offset 0 this is INT3 followed by the tail of the original 10-byte NOP. After a previous unoptimization bytes 5..9 may still contain the old call instruction, which remains valid for threads already there. 2) Rewrite the LEA tail and call displacement: cc [8d 64 24 80 e8 d0 d1 d2 d3] From offset 0 this traps on the uprobe INT3. Bytes 1..9 are not executable entry points while byte 0 is trapped. 3) Publish the first LEA byte: [48] 8d 64 24 80 e8 d0 d1 d2 d3 From offset 0 this is: lea -0x80(%rsp), %rsp call <uprobe-trampoline> Unoptimize path (int3_update_unoptimize): 1) Initial optimized state: 48 8d 64 24 80 e8 d0 d1 d2 d3 Same as 3) above. 2) Trap new entries before restoring the NOP bytes: [cc] 8d 64 24 80 e8 d0 d1 d2 d3 From offset 0 this traps. A thread that had already executed the LEA can still reach the intact CALL at offset 5. 3) Restore bytes 1..4 of the original NOP while keeping byte 0 trapped and byte 5 as CALL. cc [2e 0f 1f 84] e8 d0 d1 d2 d3 From offset 0 this still traps. Offset 5 is still the CALL for any thread that was already past the first LEA byte. 4) Publish the first byte of the original NOP: [66] 2e 0f 1f 84 e8 d0 d1 d2 d3 From offset 0 this is the restored 10-byte NOP; the CALL opcode and displacement are now only NOP operands. Offset 5 still decodes as CALL for a thread that was already there. Tthere is only a single target uprobe-trampoline for the given nop10 instruction address, so the CALL instruction will not be changed across unoptimization/optimization cycles. Therefore, any task that is preempted at the CALL instruction is guaranteed to observe that CALL and not anything else. Note as explained in [2] we need to use following nop10: PF1 PF2 ESC NOPL MOD SIB DISP32 NOP10: 0x66, 0x2e, 0x0f, 0x1f, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00 -- cs nopw 0x00000000(%rax,%rax,1) which means we need to allow 0x2e prefix which maps to INAT_PFX_CS attribute in is_prefix_bad function. Also changing the uprobe syscall error when called out of uprobe trampoline to -EPROTO, so we are able to detect the fixed kernel. The optimized uprobe performance stays the same: uprobe-nop : 3.129 ± 0.013M/s uprobe-push : 3.045 ± 0.006M/s uprobe-ret : 1.095 ± 0.004M/s --> uprobe-nop10 : 7.170 ± 0.020M/s uretprobe-nop : 2.143 ± 0.021M/s uretprobe-push : 2.090 ± 0.000M/s uretprobe-ret : 0.942 ± 0.000M/s --> uretprobe-nop10: 3.381 ± 0.003M/s usdt-nop : 3.245 ± 0.004M/s --> usdt-nop10 : 7.256 ± 0.023M/s [1] https://lore.kernel.org/bpf/20260509003146.976844-1-andrii@kernel.org/ [2] https://lore.kernel.org/bpf/20260518104306.GU3102624@noisy.programming.kicks-ass.net/#t | ||||
| CVE-2026-89907 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Validate MSI data before routing it to EIOINTC pch_msi_set_irq() passes e->msi.data straight into eiointc_set_irq() as the irq number. The MSI data comes from userspace, that either via a KVM_IRQ_ROUTING_MSI entry set with KVM_SET_GSI_ROUTING (used by irqfd and KVM_IRQ_LINE) or directly via KVM_SIGNAL_MSI, and is never checked against EIOINTC_IRQS. eiointc_set_irq() uses the value with __set_bit()/__clear_bit() on the 256-bit isr bitmap, eiointc_update_irq() then indexes sw_coremap[] and the per-cpu coreisr/sw_coreisr bitmaps with it. Therefore a data value >= 256 reads and writes memory past the end of those arrays, i.e. any process holding a VM fd can corrupt kernel memory beyond the allocation of loongarch_eiointc. Reject MSI data that doesn't fit in the EIOINTC irq space. The DMSINTC path is unaffected as it decodes the vector from the address and masks it. | ||||
| CVE-2026-89513 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Fix PMU event info array size overflow SBI PMU EVENT_GET_INFO stores guest-controlled num_events * sizeof(*einfo) in a 32-bit integer. On RV64, num_events = 0x10000001 makes 0x100000010 truncate to 16. KVM then allocates one entry but loops over the original num_events, causing out-of-bounds reads and writes. A nested guest triggered: BUG: KASAN: slab-out-of-bounds in kvm_riscv_vcpu_pmu_event_info+0xa4/0x142 Read of size 4 at addr ff600000074d46b0 by task init/1 Call Trace: [<ffffffff8006471c>] kvm_riscv_vcpu_pmu_event_info+0xa4/0x142 [<ffffffff800690c0>] kvm_sbi_ext_pmu_handler+0xca/0x268 [<ffffffff8006779e>] kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6 [<ffffffff8006008c>] kvm_riscv_vcpu_exit+0x48c/0x540 [<ffffffff8005ea0a>] kvm_arch_vcpu_ioctl_run+0x37e/0xc80 Allocated by task 1: __kmalloc_noprof+0x19e/0x4b0 kvm_riscv_vcpu_pmu_event_info+0x72/0x142 kvm_sbi_ext_pmu_handler+0xca/0x268 kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6 kvm_riscv_vcpu_exit+0x48c/0x540 kvm_arch_vcpu_ioctl_run+0x37e/0xc80 The buggy address is located 0 bytes to the right of allocated 16-byte region [ff600000074d46a0, ff600000074d46b0) Store the shared-memory size in size_t and reject multiplication overflow. Allocate the guest-driven array with GFP_KERNEL_ACCOUNT so it is charged to kmemcg, and use __GFP_NOWARN to suppress allocation failure warnings. Use kvcalloc() to allow vmalloc fallback and an unsigned long loop index to match num_events. | ||||
| CVE-2026-72423 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Guard conntrack opts error writes The conntrack lookup and allocation kfuncs take an opts pointer together with an opts__sz argument. The verifier checks only the memory range described by opts__sz, but the wrappers unconditionally write opts->error whenever the internal lookup or allocation helper returns an error. For an invalid size smaller than the end of opts->error, that write can land outside the verifier-checked range. Keep returning NULL for invalid arguments, but only report the error through opts->error when the supplied size includes the field. This preserves error reporting for the supported 12-byte and 16-byte layouts, and for other invalid sizes that still include opts->error. | ||||
| CVE-2026-72380 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/pvcalls: bound backend response req_id before indexing rsp[] pvcalls_front_event_handler() takes req_id directly from the backend-supplied ring response and uses it to index the fixed-size bedata->rsp[] array for a memcpy() and a store, with no range check. A malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING and drive an out-of-bounds write past the bedata allocation. req_id was also declared int while the wire field rsp->req_id is u32, so a range check on the signed value alone is insufficient: a backend req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single bound covers both ends. A backend that sends an out-of-range req_id has violated the wire protocol, so rather than silently dropping the response, log once and stop trusting the backend: set bedata->disabled. The event handler then ignores further responses, and the request paths that wait for a response return -EIO instead of blocking forever. This mirrors the fatal-error handling xen-netback uses (xenvif_fatal_tx_err()). The pvcalls frontend currently trusts its backend, so this is not a classic-Xen security issue, but it matters for hardening PV frontends against malicious backends (confidential and disaggregated deployments). | ||||
| CVE-2026-86476 | 1 Redhat | 1 Enterprise Linux | 2026-10-15 | 8.4 High |
| A flaw was found in gst-plugins-base. A heap buffer overflow can be triggered when processing video buffers whose attached GstVideoMeta metadata declares plane strides and offsets that exceed the actual backing memory allocation. The metadata is not range-checked during deserialization, and the video frame mapping code does not verify that the declared plane geometry fits within the buffer before allowing consumers to read or write video data. A local attacker who controls the sending side of a GStreamer inter-process IPC pipeline can deliver a crafted buffer carrying fabricated strides, causing the receiving process to read or write beyond heap boundaries. Successful exploitation can cause a denial of service or potentially allow code execution within the affected process. | ||||
| CVE-2026-103839 | 2026-10-15 | 7.8 High | ||
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-103834 | 2026-10-15 | 7.8 High | ||
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-84854 | 1 Wibu-systems-ag | 1 Wibukey | 2026-10-15 | 7 High |
| In the WibuKey driver for Windows below Version 6.72, insufficient validation of user input when calculating the size of a kernel buffer could cause small amounts of data to be written outside the intended kernel buffer. This can lead to a system crash. Under unfavorable circumstances, adjacent kernel memory may be modified. | ||||
| CVE-2026-0310 | 1 Palo Alto Networks | 4 Cloud Ngfw, Pan-os, Panorama and 1 more | 2026-10-15 | N/A |
| A buffer overflow vulnerability in the XML processing functionality of Palo Alto Networks PAN-OS® software enables an unauthenticated attacker with network access to the management web or dataplane interface to cause a denial of service (DoS) condition on VM-Series firewalls or execute arbitrary code with root privileges on the PA-Series firewalls. The security risk posed by this issue is minimized when the management interface is restricted to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 . Panorama is impacted by this vulnerability. | ||||
| CVE-2026-16170 | 1 Ibm | 5 Datapower Gateway, Datapower Gateway 1050, Datapower Gateway 1060 and 2 more | 2026-10-15 | 7.5 High |
| IBM DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.1 through 10.6.6, 10.6.0.0 through 10.6.0.10, and 11.0.0.0 through 11.0.0.2 could allow a remote attacker to cause a denial of service due to a heap buffer overflow. | ||||
| CVE-2026-16178 | 1 Ibm | 5 Datapower Gateway, Datapower Gateway 1050, Datapower Gateway 1060 and 2 more | 2026-10-15 | 7.5 High |
| IBM DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.1 through 10.6.6, 10.6.0.0 through 10.6.0.10, and 11.0.0.0 through 11.0.0.2 could allow a remote attacker to cause a denial of service due to improper input validation. | ||||