Export limit exceeded: 26112 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26112 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99047 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak when rings are stopped GVE does not free XSK buffers when resetting ring state as a part of stopping queues. This causes all XSK buffers which are posted to the NIC to be leaked. Free XSK buffers attached to an allocated buf_state when stopping rings. This issue was hit in production. | ||||
| CVE-2026-99096 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/register: don't exempt disabled rings from task restrictions A ring created with IORING_SETUP_R_DISABLED is exempt from its register restrictions until it is enabled. This lets the creator register the restrictions and then enable the ring with IORING_REGISTER_ENABLE_RINGS, whether or not that opcode is in the allowed set. Since commit ed82f35b926b ("io_uring: allow registration of per-task restrictions"), a ring also inherits restrictions from the task that creates it, and the same exemption applies to those. A task whose register opcodes are restricted can therefore create a disabled ring, issue any register opcode on it, and then enable it. Mark rings whose restrictions were inherited from the task, and keep checking register opcodes for them while the ring is disabled. Enabling such a ring now requires IORING_REGISTER_ENABLE_RINGS to be in the task's allowed set. Per-ring restrictions registered on a disabled ring work as before. [axboe: amend with inheritance flag fixup] | ||||
| CVE-2026-99099 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Fix AMD TLBI Erratum #1718 The processor may fail to invalidate a TLB entry while executing an INVLPGB/TLBSYNC instruction pair. Detect the erratum and apply a software workaround when a microcode fix is not present. | ||||
| CVE-2026-99116 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: psp: do not inherit the Rx association on clone sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into every socket accepted from a listener without taking a reference, while inet_sock_destruct() puts for every inet socket. psp_twsk_init() does refcount_inc() for the timewait socket, so a child closing through TIME_WAIT cancels its own put and leaves the association with one reference and N timewait sockets holding the same pointer. Closing the listener frees it, and the timewait timers then put freed memory. Rejecting the association on a listening socket is not sufficient: a socket can acquire one while established and then be turned back into a listener, because tcp_disconnect() leaves sk->psp_assoc in place. BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0 Write of size 4 at addr ffff888110f9255c by task swapper/7/0 psp_twsk_assoc_free+0x6f/0xf0 inet_twsk_put+0xda/0x1b0 call_timer_fn+0x53/0x2e0 __run_timers+0x764/0xa80 Freed by task 99: kfree+0x1a7/0x500 process_one_work+0x7ec/0x1100 An association carries a per-connection SPI and key, so a child must not inherit the parent's. Clear it on clone. | ||||
| CVE-2026-99188 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwmac1000: clear the RGMII status interrupt Since commit 2e2c878a3141 ("net: stmmac: remove SGMII/RGMII/SMII interrupt handling") nothing on the RGMII path reads GMAC_RGSMIIIS, so RGSMIIIS stays pending behind GMAC_INT_MASK from the first link change on. stmmac_resume() resets the MAC in stmmac_hw_setup(); the reset sets GMAC_INT_MASK to 0 until dwmac1000_core_init() writes the mask again, and the pending status storms the line: dwmac_dma_interrupt: unexpected status 04000000 A register dump at the first message on ODROID-HC4 showed it: core int_status 00000001 int_mask 00000000 pmt 00000000 rgsmiiis 0000000d When the resume thread runs on the CPU that takes the MAC interrupt, the storm starves it: a soft lockup, then a watchdog reset or a hang. Read GMAC_RGSMIIIS in dwmac1000_irq_status() when the status is not masked, as the driver did before 2e2c878a3141; the read clears it. Wake-on-LAN resume from s2idle with the resume thread and the MAC interrupt on one CPU: Helios64 (dwmac-rk), 7.3-rc6, soft-locked in 3 of 3 resumes without a fix and in 0 of 10 with this patch; it ran with an out-of-tree dwmac-rk change that keeps the GMAC powered across suspend. ODROID-HC4 (dwmac-meson8b): 0 of 10 with this patch, 2 of 2 without a fix on a 7.3-rc5 build. irq_rgmii_n went up by one per resume. | ||||
| CVE-2026-98059 | 1 Linux | 1 Linux Kernel | 2026-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark sched_process_wait argument as nullable do_wait() passes wo->wo_pid to the sched_process_wait tracepoint. kernel_wait4() leaves wo_pid NULL for wait4(-1), and kernel_waitid_prepare() does likewise for waitid(P_ALL). btf_ctx_access() currently types argument 0 as PTR_TO_BTF_ID | PTR_TRUSTED. Without PTR_MAYBE_NULL, the verifier accepts an unchecked dereference. Trusted pointer loads have no fault protection, so a wait for any child can then cause a NULL pointer dereference in JITed BPF code. Add sched_process_wait to raw_tp_null_args[] with argument 0 marked nullable. The verifier rejects an unchecked dereference while preserving access after the program checks the pointer for NULL. | ||||
| CVE-2026-46300 | 3 Linux, Redhat, Siemens | 10 Kernel, Linux Kernel, Enterprise Linux and 7 more | 2026-10-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: preserve shared-frag marker during coalescing skb_try_coalesce() can attach paged frags from @from to @to. If @from has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same externally-owned or page-cache-backed frags, but the shared-frag marker is currently lost. That breaks the invariant relied on by later in-place writers. In particular, ESP input checks skb_has_shared_frag() before deciding whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP receive coalescing has moved shared frags into an unmarked skb, ESP can see skb_has_shared_frag() as false and decrypt in place over page-cache backed frags. Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged frags. The tailroom copy path does not need the marker because it copies bytes into @to's linear data rather than transferring frag descriptors. | ||||
| CVE-2026-99101 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: move attribute payload before shrinking its record ntfs_new_attr_flags() resizes the non-resident attribute record before moving its name and mapping pairs to their shorter-header offsets when compression or sparse state is cleared. Shrinking the record first moves the following attribute over the tail of the old record. The subsequent memmove() therefore copies bytes from that following attribute instead of the old mapping pairs. Re-enabling compression on an empty file persists those bytes as a malformed mapping pairs array, which ntfsck reports as a missing or invalid run length. Move the payload before shrinking the record, while retaining the existing resize-before-move ordering when growing it. | ||||
| CVE-2026-99104 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix the bypass dispatch claim for schedulers bypassed by an ancestor scx_bypass() claims bypass dispatch when the scheduler's depth goes from zero to one and releases it when the depth returns to zero, but propagates only the depth to the descendants, not the claim. A descendant that starts bypassing with its ancestor never claims, and one whose own bypass ends under the ancestor's keeps its claim, as its depth does not return to zero. A sub-scheduler enable whose bypass ends under a PM suspend thus leaks its claim: the parent keeps hosting bypass dispatch and the sub-scheduler's next bypass trips the WARN_ON_ONCE() on the claim. A sub-scheduler disable that starts under a PM suspend has no claim, so once the resume lifts the root's bypass its tasks sit on the parent's bypass DSQs with nobody consuming them. Claim for every descendant whose depth goes from zero to one in the propagation and release every scheduler in the subtree whose depth returned to zero once the tasks have moved out of the bypass DSQs. A parent that is bypassing itself when a descendant claims consumes only its own bypass DSQs, empty until it leaves bypass and becomes the host. | ||||
| CVE-2026-99170 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: namespace: a mount that copy_tree() leaves out can't take over a lock Since commit c62a4766937e ("move_mount: transfer MNT_LOCKED") a mount can be moved beneath a locked mount. The lock moves from the old cover to the new mount which takes over the job of hiding what's under it and the old cover can be unmounted. That works as long as the new mount stays. But the caller picks the new mount and copy_tree() leaves a mount of a mount namespace file out of every copy made without CL_COPY_MNT_NS_FILE, together with everything mounted on it, and never looks at MNT_LOCKED. unshare(CLONE_NEWNS) and mount propagation make such copies. So a task that is root in its own user namespace gets rid of a locked cover on a file without a race and without touching the filesystem below it. It makes a child with a mount namespace of its own, binds the child's /proc/<pid>/ns/mnt beneath the cover with MOVE_MOUNT_BENEATH, which hands the lock to that bind, and calls unshare(CLONE_NEWNS). The new mount namespace has nothing on the file. That's the usual way to mask a single file, a bind of /dev/null or of an empty file. With a bind of an ordinary file the file stays covered. copy_tree() already refuses to leave out a locked unbindable mount with -EPERM since commit df7342b24018 ("mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts"). Do the same for a locked mount of a mount namespace file. That also covers a tree copied with CL_COPY_MNT_NS_FILE and attached into a mount namespace of another user namespace where lock_mnt_tree() locks it. Note that unshare(CLONE_NEWNS) and clone(CLONE_NEWNS) fail with EPERM from such a mount namespace from then on. The mount can't be left out and it can't be unmounted. And refuse to move a mount of a mount namespace file beneath a locked mount in the first place. Otherwise the task ends up with a mount it can't unmount and an unshare() that fails for good. Chris also found a second mount that goes away by itself, a clone of an automounted mount that shrink_submounts() took along with its parent. Commit f78ddcc87224 ("namespace: never expire a locked mount") took care of that one. Chris's reproducer is appended. Mode nsfile reads SECRET after the unshare() on 7.3-rc7, with this patch the move_mount() fails with EINVAL and the file stays covered. nsfile-control uses an ordinary file and reads MASK both ways. // SPDX-License-Identifier: GPL-2.0 /* * Get rid of a locked cover with MOVE_MOUNT_BENEATH. * * The "admin" (root) makes a tmpfs W: * W/D file, holds SECRET, covered by a bind of a file with MASK * W/Dd/inner file, holds SECRET, Dd is covered by a bind of a directory * whose "inner" holds MASK * W/own directory of uid 1000 with the file "mine" and the * directory "minedir", whose "inner" holds MINE * W/dbg debugfs, mode 755. dbg/tracing is an automount point * The "attacker" is uid 1000. It enters a new user namespace with a new mount * namespace, so W and both covers are locked there. * * usage: prog MODE * plain put a bind of own/mine beneath the cover of D, unmount the cover * nsfile put a bind of the mount namespace file of a child beneath the * cover of D, then unshare(CLONE_NEWNS) * nsfile-control the same with a bind of own/mine * shrink put a bind of the automounted tracefs beneath the cover of Dd, * unmount the cover, put a tmpfs beneath W, call umount(W), which fails * shrink-control the same with a bind of own/minedir * The environment variable AUTOMOUNT_DIR names another automount point for "shrink". */ #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <grp.h> #include <sched.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> ---truncated--- | ||||
| CVE-2026-99172 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: ipc: drop the mqueue mount with kern_unmount() on setup failure mq_init_ns() creates the mqueue mount with fc_mount_longterm(), so its ->mnt_ns is MNT_NS_INTERNAL. When setting up the mqueue or ipc sysctls or msg_init_ns() fails afterwards, create_ipc_ns() drops it with a plain mntput(). With ->mnt_ns set that takes the fast path of mntput_no_expire(). The count drops to zero and nothing ever kills the mount, so the mount and the mqueue superblock are leaked. Commit dc55e35f9e81 ("ipc: Store mqueue sysctls in the ipc namespace") added the first failure path after mq_init_ns() and never dropped the mount. Commit 7229d74e5e8c ("ipc: create_ipc_ns: drop mqueue mount on sysctl setup failure") tried to fix that with a mntput() but that doesn't help for a long-term mount. Use kern_unmount(). free_ipc() open-codes the same thing for a namespace that made it. | ||||
| CVE-2026-99199 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: hip04_eth: Move setting of netops to fix crash hip04_mac_probe() calls of_phy_connect() before ndev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash"). | ||||
| CVE-2026-99207 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Disable interrupts while holding delayed_cmd_lock target_do_delayed_work() takes dev->delayed_cmd_lock with a plain spin_lock(). It runs from system_percpu_wq, so interrupts stay enabled while the lock is held. Every other acquisition of that lock uses spin_lock_irqsave(): target_handle_task_attr() and transport_complete_ordered_sync() in target_core_transport.c, and target_non_ordered_release() in target_core_device.c. That was safe while every caller of transport_complete_task_attr() ran in process context: target_complete_ok_work() from target_completion_wq, transport_complete_qf() from dev->qf_work_queue, and transport_generic_request_failure() from the submit and execute paths. Since commit 06933066d88a ("scsi: target: Add support for completing commands from backend context") that is no longer true. With complete_type=1 on a fabric that sets direct_compl_supp, target_complete() runs target_complete_ok_work() inline in the backend's completion context, which target_complete_cmd_with_sense() documents as "May be called from interrupt context". For iblock that is the bio end_io. target_complete_ok_work() starts with transport_complete_task_attr(), which takes delayed_cmd_lock in two ways: - Every ORDERED command is put on dev->delayed_cmd_list by target_handle_task_attr() and dispatched from there by target_do_delayed_work(), which marks it SCF_TASK_ORDERED_SYNC. Its completion therefore goes through transport_complete_ordered_sync(). - A SIMPLE command that completes while an ORDERED command is pending drops the last reference to the killed dev->non_ordered, and percpu_ref_put() then runs target_non_ordered_release() in the completing context. Both take the lock and, if commands are waiting, call schedule_work(&dev->delayed_cmd_work), which queues on system_percpu_wq, i.e. on the CPU that took the completion. Further completions for the same queue are typically delivered there too, so one arriving while the work holds the lock spins on it forever. Reaching this needs complete_type=1, which is not the default (vhost-scsi, the only fabric with direct_compl_supp, defaults to TARGET_QUEUE_COMPL), a backend whose I/O completes from interrupt context, and ORDERED commands from the initiator. Linux virtio_scsi guests send only VIRTIO_SCSI_S_SIMPLE and never take the ordered path; any guest that uses the ORDERED task attribute, which vhost-scsi accepts, does. target_do_delayed_work() is a work item and always runs in process context, so spin_lock_irq() is sufficient. Found by inspection; no runtime report. A single ORDERED command goes through both acquisitions, so with CONFIG_PROVE_LOCKING the first one completed through direct completion should produce an inconsistent lock state report on delayed_cmd_lock (hardirq or softirq, depending on where the backend completes). | ||||
| CVE-2026-99208 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Zero OA buffer at allocation ttm_bo_type_kernel BOs are not guaranteed to be zeroed on allocation and may contain data from previously freed pages. Since the OA buffer is mmap'able by userspace, this can expose stale kernel memory contents. Streams opened with DRM_XE_OA_PROPERTY_OA_DISABLED allocate the OA buffer without calling xe_oa_init_oa_buffer(). Zero the buffer at allocation to prevent information disclosure through mmap. The existing zeroing in xe_oa_init_oa_buffer() remains necessary for zero report-id/timestamp detection on enable/re-enable. (cherry picked from commit 126c4c5388f9311a390b9b254a835b0cf0f55331) | ||||
| CVE-2026-99210 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: clear rdev on device init failure rocket_probe() stores the return value from rocket_device_init() in the file-scoped rdev pointer before checking whether it is an error pointer. If rocket_device_init() fails, rdev is left as an ERR_PTR. The rdev pointer is also used as the marker for whether the shared rocket device has already been initialized. A later core probe can therefore see a non-NULL rdev, skip rocket_device_init(), and dereference the error pointer when reading rdev->num_cores. Save the error code and clear rdev before returning from the rocket_device_init() failure path. | ||||
| CVE-2026-99107 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize(). When the attribute is in an extent record, ctx->mrec points to the extent but the function receives the base record pointer m, causing incorrect size calculations in memmove. Fix by passing ctx->mrec (the actual MFT record containing the attribute) instead of m (the base MFT record) to ntfs_attr_record_resize(). | ||||
| CVE-2026-99108 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix FITRIM range alignment ntfs_trim_fs() aligns the start of a free extent up to the device discard granularity, but derives the discard length by aligning the original extent length down. When the free extent start is not discard-aligned, adding that length to the aligned start can extend the discard past the free extent and into allocated clusters. For example, with 4 KiB clusters and 32 KiB discard granularity, the free extent [4 KiB, 36 KiB) becomes the discard range [32 KiB, 64 KiB), so 28 KiB beyond the free extent may be discarded. Align the absolute end of the free extent down and derive the length from the two aligned endpoints. Skip extents that contain no full discard unit. Reproduced with a 4 KiB-cluster NTFS filesystem on scsi_debug configured for 32 KiB discard granularity and read-zero-after-trim. Before this change, FITRIM zeroed seven allocated 4 KiB clusters following an unaligned 32 KiB hole. With this change, the same data remains intact across FITRIM and remount. | ||||
| CVE-2026-99109 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject SetEA requests that do not fit the request buffer CIFSSMBSetEA() copies the caller's extended attribute value into the SMB request buffer without checking that it fits. The requirement is stated in the source but was never implemented: /*BB add length check to see if it would fit in negotiated SMB buffer size BB */ /* if (ea_value_len > buffer_size - 512 (enough for header)) */ if (ea_value_len) memcpy(parm_data->list.name + name_len + 1, ea_value, ea_value_len); The only bound applied on the way in is in cifs_xattr_set(): #define MAX_EA_VALUE_SIZE CIFSMaxBufSize ... if (size > MAX_EA_VALUE_SIZE) CIFSMaxBufSize is the full payload capacity of the buffer, so a value of exactly that size leaves no room for the SMB header, the TRANS2 parameter block, the fealist header and the EA name that are written ahead of it in the same object. SendReceive() already enforces the correct limit on this very length: if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) but it is called after the copy has taken place. An unprivileged setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte value writes 16384 bytes starting 345 bytes into a 16588-byte cifs_request object, ending 141 bytes past it: BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0 Write of size 16384 at addr ffff888003aa0159 by task init/68 __asan_memcpy+0x3c/0x60 CIFSSMBSetEA+0xabc/0xde0 cifs_xattr_set+0xd3a/0xff0 __vfs_setxattr+0x13e/0x1a0 The buggy address is located 345 bytes inside of allocated 16588-byte region Apply SendReceive()'s limit to the assembled request before the copy rather than after it, and widen the byte counters so the sum cannot wrap before it is tested. byte_count is also tested against U16_MAX, because it is stored in the 16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is raised at module load, where it may be set as high as 1024*127: with a 5-byte EA name and a 65521-byte value, count is exactly U16_MAX while byte_count is 65556, and cpu_to_le16() would truncate it to 20 and transmit a frame whose ByteCount does not match its length. Testing byte_count covers count as well, since byte_count is the larger of the two and count's only 16-bit consumer is written after this point. check_add_overflow() is evaluated first so that total_len is assigned before it is reported. | ||||
| CVE-2026-99111 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix data corruption with concurrent writes and O_TRUNC cifs_do_truncate() flushes dirty pages with filemap_write_and_wait() and truncates the file on the server, but in the old code both operations ran without holding i_rwsem or invalidate_lock. A concurrent buffered write via netfs_perform_write() -- which only needs i_rwsem shared -- could dirty new pages after the flush but before the local truncation, and those pages would be silently discarded by cifs_setsize() -> truncate_pagecache(). Fix by acquiring inode_lock (exclusive i_rwsem) and filemap_invalidate_lock at the top of cifs_do_truncate(), so the entire flush-truncate-resize sequence is atomic with respect to: - buffered writes (blocked by exclusive i_rwsem, since netfs_start_io_write takes i_rwsem shared), - read page faults (blocked by exclusive invalidate_lock, since filemap_fault takes it shared), - writeback collection (blocked by netfs_wb_begin/netfs_wb_end around the server truncate and local resize, since netfs_writepages also acquires the wb lock). | ||||
| CVE-2026-99016 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: futex: untag the user pointer before the atomic access access_ok() checks untagged_addr(uaddr), but arch_futex_atomic_op_inuser() and futex_atomic_cmpxchg_inatomic() hand the raw uaddr to the inline asm amoswap/amoadd/.../lr.w+sc.w through the "+m" (*uaddr) operand. When the tagged address ABI is enabled (CONFIG_RISCV_ISA_SUPM, prctl PR_SET_TAGGED_ADDR_CTRL with PMLEN != 0), those two addresses differ: a user pointer whose top PMLEN bits hold a tag passes access_ok() after untagging, but the atomic is then performed on the still-tagged raw address. Supervisor-mode data accesses are not subject to the U-mode pointer masking (that is governed by menvcfg.PMM, which the kernel does not set), so hardware does not strip the tag for the kernel's own access. With Sv57 and PMLEN=16 the tag bits overlap the canonical-address bits, so a tagged pointer can name a canonical kernel virtual address (e.g. in the linear map) whose untagged form is a valid user address. An unprivileged process can thus make FUTEX_WAKE_OP perform an atomic read-modify-write on an arbitrary kernel address, with the matching FUTEX_OP_CMP_* result serving as a read oracle. get_user()/put_user()/raw_copy_{to,from}_user() already untag the pointer after the access_ok() check; do the same in the futex helpers so the atomic operates on the address that was actually validated. | ||||