Export limit exceeded: 15883 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15883 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64026 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg This improves the fix for CVE-2026-43500. Fix the pagecache corruption from in-place decryption of a DATA packet transmitted locally by splice() by getting rid of the packet sharing in the I/O thread and unconditionally extracting the packet content into a bounce buffer in which the buffer is decrypted. recvmsg() (or the kernel equivalent) then copies the data from the bounce buffer to the destination buffer. The sk_buff then remains unmodified. This has an additional advantage in that the packet is then arranged in the buffer with the correct alignment required for the crypto algorithms to process directly. The performance of the crypto does seem to be a little faster and, surprisingly, the unencrypted performance doesn't seem to change much - possibly due to removing complexity from the I/O thread. Yet another advantage is that the I/O thread doesn't have to copy packets which would slow down packet distribution, ACK generation, etc.. The buffer belongs to the call and is allocated initially at 2K, sufficiently large to hold a whole jumbo subpacket, but the buffer will be increased in size if needed. However, to take this work, MSG_PEEK may cause a later packet to be decrypted into the buffer, in which case the earlier one will need re-decrypting for a subsequent recvmsg(). Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so switch to using USHRT_MAX to indicate an invalid offset. Note also that I would generally prefer to replace the buffers of the current sk_buff with a new kmalloc'd buffer of the right size, ditching the old data and frags as this makes the handling of MSG_PEEK easier and removes the re-decryption issue, but this looks like quite a complicated thing to achieve. skb_morph() looks half way to what I want, but I don't want to have to allocate a new sk_buff. | ||||
| CVE-2026-64018 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: validate rx_req_idx to prevent out-of-bounds array access In mana_hwc_rx_event_handler(), rx_req_idx is derived from sge->address in DMA-coherent memory. In Confidential VMs (SEV-SNP/TDX), this memory is shared unencrypted and HW can modify WQE contents at any time. No bounds check exists on rx_req_idx, which can lead to an out-of-bounds access into reqs[]. Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before using it to index the reqs[] array. | ||||
| CVE-2026-64009 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Check for underflow in xfrm_state_mtu Leo Lin reported OOB write issue in esp component: xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned modulo-2^32 space using an attacker-influenced "header_len + authsize + net_adj" subtracted from a small "mtu" argument. A nobody user can install an IPv4 ESP tunnel SA with a large authentication key (XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc), configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a large value. When a single UDP datagram is then sent through the tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and esp_output() consumes it as a signed int via: padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached)) esp.tfclen = padto - skb->len (assigned to int) esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t when passed to memset() inside esp_output_fill_trailer(), producing a ~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as "Write of size 18446744073709551537 at addr ffff888...". Check for underflow and return 1. This causes the sendmsg attempt to fail with ENETUNREACH. | ||||
| CVE-2026-63996 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: require exact CDB reply length Malicious SFP module could respond with rpl_len longer than what cmis_cdb_process_reply() expected, leading to OOB writes. Malicious HW is a bit theoretical but some modules may just be buggy and/or the reads may occasionally get corrupted, so let's protect the kernel. The existing check protects from short replies. We need to protect from long ones, too. All callers that pass a non-zero rpl_exp_len cast the reply payload to a fixed-layout struct and read fields at fixed offsets, with no version negotiation or short-reply handling: - cmis_cdb_validate_password() - cmis_cdb_module_features_get() - cmis_fw_update_fw_mng_features_get() so let's assume that responses longer than expected do not have to be handled gracefully here. Add a warning message to make the debug easier in case my understanding is wrong... Note that page_data->length (argument of kmalloc) comes from last arg to ethtool_cmis_page_init() which is rpl_exp_len. Note2 that AIs also like to point out overflows in args->req.payload itself (which is a fixed-size 120 B buffer, on the stack), but callers should be reading structs defined by the standard, so protecting from requests for more data than max seem like defensive programming. | ||||
| CVE-2026-63995 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: validate start_cmd_payload_size from module The CMIS firmware update code reads start_cmd_payload_size from the module's FW Management Features CDB reply and uses it directly as the byte count for memcpy. The destination buffer is 112 bytes (ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious module (or corrupted response) can cause a OOB write later on in cmis_fw_update_start_download(). Let's error out. If modules that expect longer LPL writes actually exist we should revisit. struct cmis_cdb_start_fw_download_pl's definition has to move, no change there. | ||||
| CVE-2026-63987 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION nest list with an index 'i' and writes new_profile[i++] without bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES entries (5), but the Netlink nest count is entirely user-controlled. Netlink policies do not have support for constraining the number of nested entries (or number of multi-attr entries). | ||||
| CVE-2026-63916 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix OOB write in wacom_hid_set_device_mode() wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE usage is always located in the first field (field[0]) of the feature report. However, a device can specify HID_DG_INPUTMODE in a different field. If HID_DG_INPUTMODE is in a field other than the first one and the first field has a report_count smaller than the usage_index of HID_DG_INPUTMODE, this leads to an out-of-bounds write to r->field[0]->value. Fix this by storing the field index of HID_DG_INPUTMODE in 'struct hid_data' during feature mapping. In wacom_hid_set_device_mode(), use this stored field index to access the correct field and add bounds checks to ensure both the field index and the value index are within valid ranges before writing. | ||||
| CVE-2026-63881 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix a vulnerability of integer overflow in kfd debugger get_queue_ids() computes array_size = num_queues * sizeof(uint32_t), which could overflow on 32-bit size_t build. using array_size() instead, it saturates to SIZE_MAX on overflow. (cherry picked from commit 2d57a0475f085c08b49312dfd8edcb461845f285) | ||||
| CVE-2026-63824 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: fix overflow in keyctl_pkey_params_get_2() The length for the internal output buffer is calculated incorrectly, which can result overflow when a too small buffer is provided. Fix the bug by allocating internal output with the size of the maximum length of the cryptographic primitive instead of caller provided size. | ||||
| CVE-2026-53375 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce: Prevent partial address patches In the case that only one of lo/hi is valid, the patching could result in a bad address written to in FW. | ||||
| CVE-2026-103513 | 1 Apache | 1 Datasketches | 2026-10-16 | 9.8 Critical |
| Out-of-bounds read and write in the CPC sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp). A crafted serialized CPC sketch passed to cpc_sketch::deserialize(), from either a byte buffer or a stream, can cause the decompressor to read past the end of the compressed data, because the read position was only checked after decoding finished. In the hybrid flavor, it can also cause a write outside an internal heap buffer, because decoded row indices were not validated. Several other header fields and decoded values, including lg_k, were also not validated. This can corrupt heap memory, causing a crash and potentially enabling further exploitation. This issue affects Apache DataSketches C++: from 2.0.0-incubating before 5.3.0. Only applications that deserialize CPC sketches from untrusted sources are affected. Users are recommended to upgrade to version 5.3.0, which fixes this issue. | ||||
| CVE-2026-97762 | 1 Microsoft | 14 365 Apps, Microsoft 365, Microsoft 365 Apps For Enterprise and 11 more | 2026-10-16 | 8.8 High |
| Out-of-bounds write in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-105005 | 1 Microsoft | 2 Windows 11 26h1, Windows 11 26h1 | 2026-10-16 | 8.1 High |
| Out-of-bounds write in Windows Schannel allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-111458 | 1 Adulau | 1 Ssldump | 2026-10-16 | N/A |
| The fanx_fingerprint function in ssl/sslxprint.c of ssldump allocates a heap buffer for formatting FAN/1 X.509 certificate fingerprints. The allocation size is computed as strlen(b64) + strlen(hex) + 31, but the format string "fan1:x509:server:passive:%s:sha256:%s" contains 33 fixed characters in addition to the two variable-length fields and a null terminator, requiring strlen(b64) + strlen(hex) + 34 bytes. This miscalculation results in a 3-byte heap-based buffer overflow on every invocation of the function with valid inputs. The overflow occurs because sprintf writes the full formatted string into the undersized heap buffer without bounds checking. An attacker who can supply a crafted pcap file containing a TLS X.509 certificate to a user running ssldump with FAN/1 fingerprinting enabled (for example with the -j -N options) can trigger the overflow. The resulting heap corruption may lead to denial of service through a crash or, in a worst-case scenario, arbitrary code execution in the context of the user running ssldump. The vulnerability is deterministic and requires no special privileges beyond the ability to provide input to the tool. | ||||
| CVE-2026-97312 | 3 Adobe, Apple, Microsoft | 3 Photoshop, Macos, Windows | 2026-10-16 | 7.8 High |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-104347 | 3 Adobe, Apple, Microsoft | 3 Photoshop, Macos, Windows | 2026-10-16 | 7.8 High |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-104346 | 3 Adobe, Apple, Microsoft | 3 Photoshop, Macos, Windows | 2026-10-16 | 7.8 High |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-100112 | 3 Adobe, Apple, Microsoft | 3 Photoshop, Macos, Windows | 2026-10-16 | 7.8 High |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-100111 | 3 Adobe, Apple, Microsoft | 3 Photoshop, Macos, Windows | 2026-10-16 | 7.8 High |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-96522 | 3 Adobe, Apple, Microsoft | 3 Photoshop, Macos, Windows | 2026-10-16 | 7.8 High |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||