Export limit exceeded: 36116 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36116 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-9546 | 2 Curl, Haxx | 2 Curl, Curl | 2026-09-15 | 7.5 High |
| A vulnerability in libcurl caused the HTTP `Referer:` header to persist even when explicitly cleared. While the documentation states that passing NULL to `CURLOPT_REFERER` suppresses the header, the option failed to clear the internal state. As a result, the previous referrer string was erroneously reused and sent in subsequent requests, potentially leaking sensitive information to unintended servers. | ||||
| CVE-2026-9545 | 2 Curl, Haxx | 2 Curl, Curl | 2026-09-15 | 7.5 High |
| In this scenario, libcurl first uses a proper HTTP/3 server for the initial transfers, and when it makes a second transfer to the same site it has been replaced by the attacker's impostor machine - without a valid certificate. When libcurl returns to the hostname the second time with a cached SSL session (`CURLOPT_SSL_SESSIONID_CACHE` is not disabled) and early data enabled (the `CURLSSLOPT_EARLYDATA` bit is set in `CURLOPT_SSL_OPTIONS`), libcurl might send off the second request's bytes on that new connection *before* enforcing the certificate verification failure. Potentially leaking sensitive information. | ||||
| CVE-2026-8924 | 2 Curl, Haxx | 2 Curl, Curl | 2026-09-15 | 9.1 Critical |
| A flaw in curl’s cookie parsing logic allows a malicious HTTP server to set "super cookies" that bypass the Public Suffix List check. This enables an attacker-controlled origin to inject cookies that curl subsequently scopes and transmits to unrelated third-party domains. | ||||
| CVE-2026-8458 | 2 Curl, Haxx | 2 Curl, Curl | 2026-09-15 | 6.5 Medium |
| libcurl might in some circumstances reuse the wrong connection when asked to do Negotiate-authenticated ones, even when they are set to use different "services". libcurl features a pool of recent connections so that subsequent requests can reuse an existing connection to avoid overhead. When reusing a connection a range of criteria must be met. Due to a logical error in the code, a request that was issued by an application could wrongfully reuse an existing connection to the same server that was authenticated using different services. | ||||
| CVE-2026-52944 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE FSCTL_SET_SPARSE in fsctl_set_sparse() modifies the file's sparse attribute and saves it through xattr without any permission checks. This exposes two issues: 1) A client on a read-only share can change the sparse attribute on files it opened, even though the share is read-only. Other FSCTL write operations already check test_tree_conn_flag(work->tcon, KSMBD_TREE_CONN_FLAG_WRITABLE), but FSCTL_SET_SPARSE does not. 2) Even on writable shares, clients without FILE_WRITE_DATA or FILE_WRITE_ATTRIBUTES access should not modify the sparse attribute. Similar handle-level checks exist in other functions but are missing here. Add both share-level writable check and per-handle access check. Use goto out on error to avoid leaking file references. | ||||
| CVE-2026-64390 | 1 Linux | 1 Linux Kernel | 2026-09-05 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: track the connection owning a byte-range lock SMB2_LOCK adds each granted byte-range lock to both the file lock list and the lock list of the connection which handled the request. The final close and durable handle paths, however, remove the connection list entry while holding fp->conn->llist_lock. With SMB3 multichannel, the connection handling the LOCK request can be different from the connection which opened the file. The entry can therefore be removed under a different spinlock from the one protecting the list it belongs to. A concurrent traversal can then access freed struct ksmbd_lock and struct file_lock objects. Record the connection owning each lock's clist entry and hold a reference to it while the entry is linked. Use that connection and its llist_lock for unlock, rollback, close, and durable preserve. Durable reconnect assigns the new connection as the owner when publishing the locks again. | ||||
| CVE-2026-47843 | 2 Broadcom, Spring | 2 Reactor Netty, Reactor Netty | 2026-09-05 | 3.7 Low |
| In specific scenarios involving multiple clients with different DNS resolver configurations, Reactor Netty may incorrectly reuse a previously configured DNS resolver. Reactor Netty 1.3.0 - 1.3.6 Reactor Netty 1.1.0 - 1.2.18 Reactor Netty 1.0.52 and earlier | ||||
| CVE-2026-47834 | 2 Spring, Vmware | 2 Spring Data Jpa, Spring Data Jpa | 2026-09-04 | 4.8 Medium |
| Spring Data JPA's Sort validation can be bypassed when parameters containing crafted payload are accepted from untrusted sources. Spring Data JPA 4.1.0 Spring Data JPA 4.0.0 - 4.0.6 Spring Data JPA 3.5.0 - 3.5.13 Spring Data JPA 3.0.0 - 3.4.15 | ||||
| CVE-2026-47844 | 2 Broadcom, Spring | 2 Reactor Netty, Reactor Netty | 2026-09-04 | 5.3 Medium |
| In specific scenarios, the Reactor Netty HTTP Server may leak exception details across unrelated requests. In order for this to happen, the server must be configured with Brave Tracing. Reactor Netty 1.3.0 - 1.3.6 Reactor Netty 1.1.0 - 1.2.18 Reactor Netty 1.0.52 and earlier | ||||
| CVE-2026-64393 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: run set info with opener credentials SMB2 SET_INFO handlers call path-based VFS helpers after checking the access mask granted to the SMB handle. Those helpers perform their owner, inode permission and LSM checks using the current ksmbd worker credentials. Run the complete SET_INFO dispatch with the credentials captured when the handle was opened. This also removes the separate security information credential setup and keeps all SET_INFO classes under one credential scope. Direct override_creds() is used because it can nest with the request credential overrides already used by rename and link helpers. | ||||
| CVE-2026-64392 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for delete-on-close Delete-on-close can be completed by deferred or durable handle teardown, where no request work is available. Both the base-file unlink and the ADS xattr removal consequently run with the ksmbd worker credentials and can bypass filesystem permission checks. Run both operations with the credentials captured in struct file when the handle was opened. This preserves the authenticated user's fsuid, fsgid, supplementary groups and capability restrictions at final close. | ||||
| CVE-2026-64391 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for ADS I/O Alternate data streams are stored as xattrs. Unlike regular file I/O, their read and write paths therefore call VFS xattr helpers which recheck inode permissions and LSM policy using the current task credentials. Run ADS I/O with the credentials captured when the SMB handle was opened. | ||||
| CVE-2026-64389 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate NTLMv2 response before updating session key ksmbd_auth_ntlmv2() derives the NTLMv2 session key into sess->sess_key before it verifies the NTLMv2 response. ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even when ksmbd_auth_ntlmv2() failed. With SMB3 multichannel binding, the failed authentication operates on an existing session and the session setup error path does not expire binding sessions. A client can send a binding session setup with a bad NT proof and KEY_XCH and still modify sess->sess_key before STATUS_LOGON_FAILURE is returned. Relevant path: smb2_sess_setup() -> conn->binding = true -> ntlm_authenticate() -> session_user() -> ksmbd_decode_ntlmssp_auth_blob() -> ksmbd_auth_ntlmv2() -> calc_ntlmv2_hash() -> hmac_md5_usingrawkey(..., sess->sess_key) -> crypto_memneq() returns mismatch -> KEY_XCH arc4_crypt(..., sess->sess_key, ...) -> out_err without expiring the binding session Derive the base session key into a local buffer and copy it to sess->sess_key only after the proof matches. Return immediately on authentication failure so KEY_XCH is only processed after successful authentication. | ||||
| CVE-2026-64357 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchmaps reservation limit check xfs_exchmaps_estimate_overhead() adds the bmbt and rmapbt overhead to a local resblks variable, but the final UINT_MAX check still tests req->resblks. That is the reservation value from before the overhead was added. The computed value is stored back in req->resblks and later passed to xfs_trans_alloc(), whose block reservation argument is unsigned int. Check the computed reservation so the existing limit applies to the value that will be used. | ||||
| CVE-2026-64359 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers Syzbot reported a hung task in nilfs_transaction_begin() where multiple tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds waiting to acquire ns_segctor_sem for read: INFO: task syz.0.17:5918 blocked for more than 143 seconds. Call Trace: schedule+0x164/0x360 rwsem_down_read_slowpath+0x6d9/0x940 down_read+0x99/0x2e0 nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221 nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921 notify_change+0xc1a/0xf40 chmod_common+0x273/0x4a0 do_fchmodat+0x12d/0x230 The writer holding ns_segctor_sem was a concurrent NILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emitting per-element warnings from nilfs_sufile_updatev(): __nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78 nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186 nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline] nilfs_free_segments fs/nilfs2/segment.c:1140 [inline] nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline] nilfs_segctor_do_construct+0x1f55/0x76c0 nilfs_clean_segments+0x3bd/0xa50 nilfs_ioctl_clean_segments fs/nilfs2/ioctl.c:922 [inline] nilfs_ioctl+0x261f/0x2780 The root cause is that user-supplied segment numbers are not validated before nilfs_clean_segments() begins doing work; the range check on each segnum is performed deep inside the call chain by nilfs_sufile_updatev(), which emits a nilfs_warn() per invalid entry while still holding the segctor lock and the sufile mi_sem. Under load (repeated invocations across multiple mounts saturating the global printk path), the cumulative printk latency keeps ns_segctor_sem held long enough to trip the hung_task watchdog, blocking concurrent operations such as chmod() that need ns_segctor_sem for read. Fix by validating the contents of kbufs[4] in nilfs_clean_segments() immediately after acquiring ns_segctor_sem via nilfs_transaction_lock(). Holding ns_segctor_sem serializes the check against nilfs_ioctl_resize(), which can modify ns_nsegments, so the validation uses a consistent value. Out-of-range segment numbers are rejected with -EINVAL before any segment-cleaning work begins, so the bad entries never reach the per-element diagnostic path inside nilfs_sufile_updatev(). | ||||
| CVE-2026-64394 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: add a WRITE_DAC/WRITE_OWNER check to SMB2 SET_INFO SECURITY commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE") added a fp->daccess gate to fsctl_set_sparse and noted that "similar handle-level checks exist in other functions but are missing here." The SMB2 SET_INFO SECURITY arm is one of the missing ones, and the most security-relevant: smb2_set_info_sec() calls set_info_sec() with no per-handle access check. set_info_sec() (fs/smb/server/smbacl.c) re-permissions the file: it rewrites owner/group/mode via notify_change(), rewrites the POSIX ACL via set_posix_acl(), and on KSMBD_SHARE_FLAG_ACL_XATTR shares removes and rewrites the Windows security descriptor via ksmbd_vfs_set_sd_xattr(). Every other persistent-mutation arm of the sibling handler smb2_set_info_file() checks fp->daccess first (FILE_WRITE_DATA / FILE_DELETE / FILE_WRITE_EA / FILE_WRITE_ATTRIBUTES); the SECURITY arm — which mutates the access control itself — is the only one with no gate. A client can therefore open a handle with FILE_WRITE_ATTRIBUTES only (no FILE_WRITE_DAC / FILE_WRITE_OWNER) and use SMB2_SET_INFO with InfoType SMB2_O_INFO_SECURITY to rewrite the file's DACL and owner, granting itself access the handle's daccess never carried. Unlike the FSCTL data arms this is a metadata/xattr operation, so there is no FMODE_WRITE VFS backstop — the missing fp->daccess check is the entire gate. Setting a security descriptor is the WRITE_DAC / WRITE_OWNER operation, so require at least one of those on the handle before re-permissioning the file. -EACCES is mapped to STATUS_ACCESS_DENIED by smb2_set_info(). | ||||
| CVE-2026-64410 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: IPIP tunnel hardware offload is not yet support No driver supports for IPIP tunnels yet, give up early on setting up the hardware offload for this scenario. This patch adds a stub that can be enhanced to add more configuration that are currently not supported. As of now, the offload work is enqueued to the worker, then ignored if the hardware offload configuration is not supported. Check the NF_FLOW_HW flag to know if this entry was already tried once to be offloaded so this is not retried on refresh when unsupported. Move NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag is unset the _del and _stats variants are never called. This can be updated later on to skip hardware offload work to be queued in case hardware offload does not support it. | ||||
| CVE-2026-64414 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: handle unreadable frags sashiko reports: When an skb with unreadable fragments (such as from devmem TCP, where skb_frags_readable(skb) returns false) is processed by the u32 module, skb_copy_bits() will safely return a negative error code [..] xt_u32: bail out with hotdrop in this case. gather_frags: return -1, just as if we had no fragment header. nfnetlink_queue: restrict to the linear part. nfnetlink_log: restrict to the linear part. v2: - skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue is broken too xt_u32 shouldn't return true if hotdrop was set. | ||||
| CVE-2026-64419 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show() Reading the debugfs "count" file of a memcg-aware shrinker can sleep inside an RCU read-side critical section: BUG: sleeping function called from invalid context at kernel/cgroup/rstat.c:421 RCU nest depth: 1, expected: 0 css_rstat_flush mem_cgroup_flush_stats zswap_shrinker_count shrinker_debugfs_count_show shrinker_debugfs_count_show() invokes the ->count_objects() callback under rcu_read_lock(). The zswap callback flushes memcg stats via css_rstat_flush(), which may sleep, so it must not run under RCU. The RCU lock is not needed here. mem_cgroup_iter() takes RCU internally and returns a memcg holding a css reference (dropped on the next iteration or by mem_cgroup_iter_break()), so the memcg stays alive without it. The shrinker is kept alive by the open debugfs file: shrinker_free() removes the debugfs entries via debugfs_remove_recursive(), which waits for in-flight readers to drain, before call_rcu(..., shrinker_free_rcu_cb). The sibling "scan" handler already invokes the sleeping ->scan_objects() callback with no RCU section. Drop the rcu_read_lock()/rcu_read_unlock(). | ||||
| CVE-2026-64428 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: sch: use raw_spinlock_t in the irq startup path sch_irq_unmask() enables the GPIO IRQ and then updates the controller state through sch_irq_mask_unmask(), which takes sch->lock with spin_lock_irqsave(). The callback can be reached from irq_startup() while setting up a requested IRQ. That path is not sleepable, but on PREEMPT_RT a regular spinlock_t becomes a sleeping lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the request_threaded_irq() -> __setup_irq() -> irq_startup() -> sch_irq_unmask() -> sch_irq_mask_unmask() carrier and used the original spin_lock_irqsave(&sch->lock) edge. Lockdep reported: BUG: sleeping function called from invalid context hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv] sch_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv] sch_irq_mask_unmask.constprop.0+0x31/0x70 [vuln_msv] __setup_irq.constprop.0+0xd/0x30 [vuln_msv] Convert the SCH controller lock to raw_spinlock_t. The same lock is also used by the GPIO direction and value callbacks, but those critical sections only update MMIO-backed GPIO registers and do not contain sleepable operations. Keeping this register lock non-sleeping is therefore appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. | ||||