Export limit exceeded: 417223 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417223 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417223 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46175 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix fsck inconsistency caused by FGGC of node block During FGGC node block migration, fsck may incorrectly treat the migrated node block as fsync-written data. The reproduction scenario: root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync root@vm:/mnt/f2fs# rm -f 1 root@vm:/mnt/f2fs# sync root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP SPO, "fsck --dry-run" find inode has already checkpointed but still with DENT_BIT_SHIFT set The root cause is that GC does not clear the dentry mark and fsync mark during node block migration, leading fsck to misinterpret them as user-issued fsync writes. In BGGC mode, node block migration is handled by f2fs_sync_node_pages(), which guarantees the dentry and fsync marks are cleared before writing. This patch move the set/clear of the fsync|dentry marks into __write_node_folio to make the logic clearer, and ensures the fsync|dentry mark is cleared in FGGC. | ||||
| CVE-2026-46165 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: vport: fix self-deadlock on release of tunnel ports vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed and the reference is never released, causing a self-deadlock on device removal. Fix that by moving the rcu_call() before the rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself is already released. | ||||
| CVE-2026-46157 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix data race at accessing runtime.oss.trigger Currently the runtime.oss.trigger field may be accessed concurrently without protection, which may lead to the data race. And, in this case, it may lead to more severe problem because it's a bit field; as writing the data, it may overwrite other bit fields as well, which confuses the operation completely, as spotted by fuzzing. Fix it by covering runtime.oss.trigger bit fled also with the existing params_lock mutex in both snd_pcm_oss_get_trigger() and snd_pcm_oss_poll(). | ||||
| CVE-2026-46148 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core-qspi: control built-in cs manually The coreQSPI IP supports only a single chip select, which is automagically operated by the hardware - set low when the transmit buffer first gets written to and set high when the number of bytes written to the TOTALBYTES field of the FRAMES register have been sent on the bus. Additional devices must use GPIOs for their chip selects. It was reported to me that if there are two devices attached to this QSPI controller that the in-built chip select is set low while linux tries to access the device attached to the GPIO. This went undetected as the boards that connected multiple devices to the SPI controller all exclusively used GPIOs for chip selects, not relying on the built-in chip select at all. It turns out that this was because the built-in chip select, when controlled automagically, is set low when active and high when inactive, thereby ruling out its use for active-high devices or devices that need to transmit with the chip select disabled. Modify the driver so that it controls chip select directly, retaining the behaviour for mem_ops of setting the chip select active for the entire duration of the transfer in the exec_op callback. For regular transfers, implement the set_cs callback for the core to use. As part of this, the existing setup callback, mchp_coreqspi_setup_op(), is removed. Modifying the CLKIDLE field is not safe to do during operation when there are multiple devices, so this code is removed entirely. Setting the MASTER and ENABLE fields is something that can be done once at probe, it doesn't need to be re-run for each device. Instead the new setup callback sets the built-in chip select to its inactive state for active-low devices, as the reset value of the chip select in software controlled mode is low. | ||||
| CVE-2026-46071 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Avoid clearing VMCB_LBR in vmcb12 svm_copy_lbrs() always marks VMCB_LBR dirty in the destination VMCB. However, nested_svm_vmexit() uses it to copy LBRs to vmcb12, and clearing clean bits in vmcb12 is not architecturally defined. Move vmcb_mark_dirty() to callers and drop it for vmcb12. This also facilitates incoming refactoring that does not pass the entire VMCB to svm_copy_lbrs(). | ||||
| CVE-2026-46059 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use NextRIP as vmcb02's NextRIP after first L2 VMRUN For guests with NRIPS disabled, L1 does not provide NextRIP when running an L2 with an injected soft interrupt, instead it advances the current RIP before running it. KVM uses the current RIP as the NextRIP in vmcb02 to emulate a CPU without NRIPS. However, after L2 runs the first time, NextRIP will be updated by the CPU and/or KVM, and the current RIP is no longer the correct value to use in vmcb02. Hence, after save/restore, use the current RIP if and only if a nested run is pending, otherwise use NextRIP. Give soft_int_next_rip the same treatment, as it's the same logic, just for a narrower use case. [sean: give soft_int_next_rip the same treatment] | ||||
| CVE-2026-46032 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Triple fault if restore host CR3 fails on nested #VMEXIT If loading L1's CR3 fails on a nested #VMEXIT, nested_svm_vmexit() returns an error code that is ignored by most callers, and continues to run L1 with corrupted state. A sane recovery is not possible in this case, and HW behavior is to cause a shutdown. Inject a triple fault instead, and do not return early from nested_svm_vmexit(). Continue cleaning up the vCPU state (e.g. clear pending exceptions), to handle the failure as gracefully as possible. From the APM: Upon #VMEXIT, the processor performs the following actions in order to return to the host execution context: ... if (illegal host state loaded, or exception while loading host state) shutdown else execute first host instruction following the VMRUN Remove the return value of nested_svm_vmexit(), which is mostly unchecked anyway. | ||||
| CVE-2026-46012 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix memory leaks in rxkad_verify_response() Fix rxkad_verify_response() to free the ticket and the server key under all circumstances by initialising the ticket pointer to NULL and then making all paths through the function after the first allocation has been done go through a single common epilogue that just releases everything - where all the releases skip on a NULL pointer. | ||||
| CVE-2026-46000 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix conn-level packet handling to unshare RESPONSE packets The security operations that verify the RESPONSE packets decrypt bits of it in place - however, the sk_buff may be shared with a packet sniffer, which would lead to the sniffer seeing an apparently corrupt packet (actually decrypted). Fix this by handing a copy of the packet off to the specific security handler if the packet was cloned. | ||||
| CVE-2026-45985 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O When allocating blocks during within-EOF DIO and writeback with dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was set when calling ext4_split_convert_extents(), which may potentially result in stale data issues. Assume we have an unwritten extent, and then DIO writes the second half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, ext4_iomap_alloc() call ext4_map_blocks() with EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the above flags set. Then, ext4_split_convert_extents() calls ext4_split_extent() with EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2 flags set, and it calls ext4_split_extent_at() to split the second half with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at() failed to insert extent since a temporary lack -ENOSPC. It zeroes out the first half but convert the entire on-disk extent to written since the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten in the extent status tree. [0000000000SSSSSS] data S: stale data, 0: zeroed [WWWWWWWWWWWWWWWW] on-disk extent W: written extent [WWWWWWWWWWUUUUUU] extent status tree Finally, if the DIO failed to write data to the disk, the stale data in the second half will be exposed once the cached extent entry is gone. Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting an unwritten extent before submitting I/O, and make ext4_split_convert_extents() to zero out the entire extent range to zero for this case, and also mark the extent in the extent status tree for consistency. | ||||
| CVE-2026-45961 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: fix memory leaks in gfs2_fill_super error path Fix two memory leaks in the gfs2_fill_super() error handling path when transitioning a filesystem to read-write mode fails. First leak: kthread objects (thread_struct, task_struct, etc.) When gfs2_freeze_lock_shared() fails after init_threads() succeeds, the created kernel threads (logd and quotad) are never destroyed. This occurs because the fail_per_node label doesn't call gfs2_destroy_threads(). Second leak: quota bitmap buffer (8192 bytes) When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds but before other operations complete, the allocated quota bitmap is never freed. The fix moves thread cleanup to the fail_per_node label to handle all error paths uniformly. gfs2_destroy_threads() is safe to call unconditionally as it checks for NULL pointers. Quota cleanup is added in gfs2_make_fs_rw() to properly handle the withdrawal case where quota initialization succeeds but the filesystem is then withdrawn. Thread leak backtrace (gfs2_freeze_lock_shared failure): unreferenced object 0xffff88801d7bca80 (size 4480): copy_process+0x3a1/0x4670 kernel/fork.c:2422 kernel_clone+0xf3/0x6e0 kernel/fork.c:2779 kthread_create_on_node+0x100/0x150 kernel/kthread.c:478 init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611 gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265 Quota leak backtrace (gfs2_make_fs_rw failure): unreferenced object 0xffff88812de7c000 (size 8192): gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409 gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149 gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275 | ||||
| CVE-2026-45957 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: rcu: Fix rcu_read_unlock() deadloop due to softirq Commit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in __rcu_read_unlock()") removes the recursion-protection code from __rcu_read_unlock(). Therefore, we could invoke the deadloop in raise_softirq_irqoff() with ftrace enabled as follows: WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180 Modules linked in: my_irq_work(O) CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180 RSP: 0018:ffffc900000034a8 EFLAGS: 00010002 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329 RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4c R10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000 R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054 FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <IRQ> trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 __is_insn_slot_addr+0x54/0x70 kernel_text_address+0x48/0xc0 __kernel_text_address+0xd/0x40 unwind_get_return_address+0x1e/0x40 arch_stack_walk+0x9c/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 __raise_softirq_irqoff+0x61/0x80 __flush_smp_call_function_queue+0x115/0x420 __sysvec_call_function_single+0x17/0xb0 sysvec_call_function_single+0x8c/0xc0 </IRQ> Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work") fixed the infinite loop in rcu_read_unlock_special() for IRQ work by setting a flag before calling irq_work_queue_on(). We fix this issue by setting the same flag before calling raise_softirq_irqoff() and rename the flag to defer_qs_pending for more common. | ||||
| CVE-2026-45949 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: core - use RCU and work_struct to fix race condition Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex lock, a concurrent hwrng_unregister() may call kthread_stop() again on the same task. Additionally, if hwrng_unregister() is called immediately after hwrng_register(), the stopped thread may have never been executed. Thus, hwrng_fill remains dirty even after hwrng_unregister() returns. In this case, subsequent calls to hwrng_register() will fail to start new threads, and hwrng_unregister() will call kthread_stop() on the same freed task. In both cases, a use-after-free occurs: refcount_t: addition on 0; use-after-free. WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0 Call Trace: kthread_stop+0x181/0x360 hwrng_unregister+0x288/0x380 virtrng_remove+0xe3/0x200 This patch fixes the race by protecting the global hwrng_fill pointer inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only once, and calls to kthread_run() and kthread_stop() are serialized with the lock held. To avoid deadlock in hwrng_fillfn() while being stopped with the lock held, we convert current_rng to RCU, so that get_current_rng() can read current_rng without holding the lock. To remove the lock from put_rng(), we also delay the actual cleanup into a work_struct. Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR() checks are removed from its callers. With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns directly after current_rng is dropped, kthread_stop() would be called on a freed task_struct later. To fix this, hwrng_fillfn() calls schedule() now to keep the task alive until being stopped. The kthread_stop() call is also moved from hwrng_unregister() to drop_current_rng(), ensuring kthread_stop() is called on all possible paths where current_rng becomes NULL, so that the thread would not wait forever. | ||||
| CVE-2026-45944 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down context entry When tearing down a context entry, the current implementation zeros the entire 128-bit entry using multiple 64-bit writes. This creates a window where the hardware can fetch a "torn" entry — where some fields are already zeroed while the 'Present' bit is still set — leading to unpredictable behavior or spurious faults. While x86 provides strong write ordering, the compiler may reorder writes to the two 64-bit halves of the context entry. Even without compiler reordering, the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. Align with the "Guidance to Software for Invalidations" in the VT-d spec (Section 6.5.3.3) by implementing the recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the context entry first to signal the transition of ownership from hardware to software. 2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU. 3. Perform the required cache and context-cache invalidation to ensure hardware no longer has cached references to the entry. 4. Fully zero out the entry only after the invalidation is complete. Also, add a dma_wmb() to context_set_present() to ensure the entry is fully initialized before the 'Present' bit becomes visible. | ||||
| CVE-2026-45943 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix inline data read failure for ztailpacking pclusters Compressed folios for ztailpacking pclusters must be valid before adding these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster() may assume they are already valid and then trigger a NULL pointer dereference. It is somewhat hard to reproduce because the inline data is in the same block as the tail of the compressed indexes, which are usually read just before. However, it may still happen if a fatal signal arrives while read_mapping_folio() is running, as shown below: erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : z_erofs_decompress_queue+0x4c8/0xa14 lr : z_erofs_decompress_queue+0x160/0xa14 sp : ffffffc08b3eb3a0 x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000 x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001 x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700 x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098 x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004 x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9 x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: z_erofs_decompress_queue+0x4c8/0xa14 z_erofs_runqueue+0x908/0x97c z_erofs_read_folio+0x128/0x228 filemap_read_folio+0x68/0x128 filemap_get_pages+0x44c/0x8b4 filemap_read+0x12c/0x5b8 generic_file_read_iter+0x4c/0x15c do_iter_readv_writev+0x188/0x1e0 vfs_iter_read+0xac/0x1a4 backing_file_read_iter+0x170/0x34c ovl_read_iter+0xf0/0x140 vfs_read+0x28c/0x344 ksys_read+0x80/0xf0 __arm64_sys_read+0x24/0x34 invoke_syscall+0x60/0x114 el0_svc_common+0x88/0xe4 do_el0_svc+0x24/0x30 el0_svc+0x40/0xa8 el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1bc/0x1c0 Fix this by reading the inline data before allocating and adding the pclusters to the I/O chains. | ||||
| CVE-2026-45942 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix e4b bitmap inconsistency reports A bitmap inconsistency issue was observed during stress tests under mixed huge-page workloads. Ext4 reported multiple e4b bitmap check failures like: ext4_mb_complex_scan_group:2508: group 350, 8179 free clusters as per group info. But got 8192 blocks Analysis and experimentation confirmed that the issue is caused by a race condition between page migration and bitmap modification. Although this timing window is extremely narrow, it is still hit in practice: folio_lock ext4_mb_load_buddy __migrate_folio check ref count folio_mc_copy __filemap_get_folio folio_try_get(folio) ...... mb_mark_used ext4_mb_unload_buddy __folio_migrate_mapping folio_ref_freeze folio_unlock The root cause of this issue is that the fast path of load_buddy only increments the folio's reference count, which is insufficient to prevent concurrent folio migration. We observed that the folio migration process acquires the folio lock. Therefore, we can determine whether to take the fast path in load_buddy by checking the lock status. If the folio is locked, we opt for the slow path (which acquires the lock) to close this concurrency window. Additionally, this change addresses the following issues: When the DOUBLE_CHECK macro is enabled to inspect bitmap-related issues, the following error may be triggered: corruption in group 324 at byte 784(6272): f in copy != ff on disk/prealloc Analysis reveals that this is a false positive. There is a specific race window where the bitmap and the group descriptor become momentarily inconsistent, leading to this error report: ext4_mb_load_buddy ext4_mb_load_buddy __filemap_get_folio(create|lock) folio_lock ext4_mb_init_cache folio_mark_uptodate __filemap_get_folio(no lock) ...... mb_mark_used mb_mark_used_double mb_cmp_bitmaps mb_set_bits(e4b->bd_bitmap) folio_unlock The original logic assumed that since mb_cmp_bitmaps is called when the bitmap is newly loaded from disk, the folio lock would be sufficient to prevent concurrent access. However, this overlooks a specific race condition: if another process attempts to load buddy and finds the folio is already in an uptodate state, it will immediately begin using it without holding folio lock. | ||||
| CVE-2026-45940 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix oops when split header is enabled For GMAC4, when split header is enabled, in some rare cases, the hardware does not fill buf2 of the first descriptor with payload. Thus we cannot assume buf2 is always fully filled if it is not the last descriptor. Otherwise, the length of buf2 of the second descriptor will be calculated wrong and cause an oops: Unable to handle kernel paging request at virtual address ffff00019246bfc0 ... x2 : 0000000000000040 x1 : ffff00019246bfc0 x0 : ffff00009246c000 Call trace: dcache_inval_poc+0x28/0x58 (P) dma_direct_sync_single_for_cpu+0x38/0x6c __dma_sync_single_for_cpu+0x34/0x6c stmmac_napi_poll_rx+0x8f0/0xb60 __napi_poll.constprop.0+0x30/0x144 net_rx_action+0x160/0x274 handle_softirqs+0x1b8/0x1fc ... To fix this, the PL bit-field in RDES3 register is used for all descriptors, whether it is the last descriptor or not. | ||||
| CVE-2026-45934 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix EEXIST abort due to non-consecutive gaps in chunk allocation I have been observing a number of systems aborting at insert_dev_extents() in btrfs_create_pending_block_groups(). The following is a sample stack trace of such an abort coming from forced chunk allocation (typically behind CONFIG_BTRFS_EXPERIMENTAL) but this can theoretically happen to any DUP chunk allocation. [81.801] ------------[ cut here ]------------ [81.801] BTRFS: Transaction aborted (error -17) [81.801] WARNING: fs/btrfs/block-group.c:2876 at btrfs_create_pending_block_groups+0x721/0x770 [btrfs], CPU#1: bash/319 [81.802] Modules linked in: virtio_net btrfs xor zstd_compress raid6_pq null_blk [81.803] CPU: 1 UID: 0 PID: 319 Comm: bash Kdump: loaded Not tainted 6.19.0-rc6+ #319 NONE [81.803] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 [81.804] RIP: 0010:btrfs_create_pending_block_groups+0x723/0x770 [btrfs] [81.806] RSP: 0018:ffffa36241a6bce8 EFLAGS: 00010282 [81.806] RAX: 000000000000000d RBX: ffff8e699921e400 RCX: 0000000000000000 [81.807] RDX: 0000000002040001 RSI: 00000000ffffffef RDI: ffffffffc0608bf0 [81.807] RBP: 00000000ffffffef R08: ffff8e69830f6000 R09: 0000000000000007 [81.808] R10: ffff8e699921e5e8 R11: 0000000000000000 R12: ffff8e6999228000 [81.808] R13: ffff8e6984d82000 R14: ffff8e69966a69c0 R15: ffff8e69aa47b000 [81.809] FS: 00007fec6bdd9740(0000) GS:ffff8e6b1b379000(0000) knlGS:0000000000000000 [81.809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [81.810] CR2: 00005604833670f0 CR3: 0000000116679000 CR4: 00000000000006f0 [81.810] Call Trace: [81.810] <TASK> [81.810] __btrfs_end_transaction+0x3e/0x2b0 [btrfs] [81.811] btrfs_force_chunk_alloc_store+0xcd/0x140 [btrfs] [81.811] kernfs_fop_write_iter+0x15f/0x240 [81.812] vfs_write+0x264/0x500 [81.812] ksys_write+0x6c/0xe0 [81.812] do_syscall_64+0x66/0x770 [81.812] entry_SYSCALL_64_after_hwframe+0x76/0x7e [81.813] RIP: 0033:0x7fec6be66197 [81.814] RSP: 002b:00007fffb159dd30 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [81.815] RAX: ffffffffffffffda RBX: 00007fec6bdd9740 RCX: 00007fec6be66197 [81.815] RDX: 0000000000000002 RSI: 0000560483374f80 RDI: 0000000000000001 [81.816] RBP: 0000560483374f80 R08: 0000000000000000 R09: 0000000000000000 [81.816] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000002 [81.817] R13: 00007fec6bfb85c0 R14: 00007fec6bfb5ee0 R15: 00005604833729c0 [81.817] </TASK> [81.817] irq event stamp: 20039 [81.818] hardirqs last enabled at (20047): [<ffffffff99a68302>] __up_console_sem+0x52/0x60 [81.818] hardirqs last disabled at (20056): [<ffffffff99a682e7>] __up_console_sem+0x37/0x60 [81.819] softirqs last enabled at (19470): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0 [81.819] softirqs last disabled at (19463): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0 [81.820] ---[ end trace 0000000000000000 ]--- [81.820] BTRFS: error (device dm-7 state A) in btrfs_create_pending_block_groups:2876: errno=-17 Object already exists Inspecting these aborts with drgn, I observed a pattern of overlapping chunk_maps. Note how stripe 1 of the first chunk overlaps in physical address with stripe 0 of the second chunk. Physical Start Physical End Length Logical Type Stripe ---------------------------------------------------------------------------------------------------- 0x0000000102500000 0x0000000142500000 1.0G 0x0000000641d00000 META|DUP 0/2 0x0000000142500000 0x0000000182500000 1.0G 0x0000000641d00000 META|DUP 1/2 0x0000000142500000 0x0000000182500000 1.0G 0x0000000601d00000 META|DUP 0/2 0x0000000182500000 0x00000001c2500000 1.0G 0x0000000601d00000 META|DUP 1/2 Now how could this possibly happen? All chunk allocation is ---truncated--- | ||||
| CVE-2026-45917 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: do not keep dest_dst if dev is going down There is race between the netdev notifier ip_vs_dst_event() and the code that caches dst with dev that is going down. As the FIB can be notified for the closed device after our handler finishes, it is possible valid route to be returned and cached resuling in a leaked dev reference until the dest is not removed. To prevent new dest_dst to be attached to dest just after the handler dropped the old one, add a netif_running() check to make sure the notifier handler is not currently running for device that is closing. | ||||
| CVE-2026-45899 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: drop extent cache when splitting extent fails When the split extent fails, we might leave some extents still being processed and return an error directly, which will result in stale extent entries remaining in the extent status tree. So drop all of the remaining potentially stale extents if the splitting fails. | ||||