Export limit exceeded: 15316 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15316 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-108892 | 1 Linksys | 2 E1700, E1700 Firmware | 2026-10-15 | 10 Critical |
| A vulnerability was determined in Linksys E1700 1.0.0.4.003. This vulnerability affects the function ssid1MACFilter of the file /goform/ssid1MACFilter of the component Mac Filter. This manipulation of the argument newap_text_%d causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-108538 | 1 Gpac | 1 Gpac | 2026-10-15 | 6.3 Medium |
| A security vulnerability has been detected in GPAC up to 26.07.0. The impacted element is the function gf_mx_v of the file utils/os_thread.c of the component MP4Box. Such manipulation leads to use after free. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-103226 | 1 Artifex | 1 Ghostscript | 2026-10-15 | 6.3 Medium |
| A vulnerability was identified in Artifex Ghostscript up to 10.07.0. Affected is the function type1_callsubr of the file devices/vector/gdevpsfx.c of the component Pdfwrite. The manipulation leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. Upgrading to version 10.08.0 is able to address this issue. It is suggested to upgrade the affected component. A solution was implemented: "I've chosen to fix this slightly differently by using the defined macro in the font parsing loop rather than in the callsubr function, because this better matches the pattern of 'normal' usage." | ||||
| CVE-2026-110694 | 1 Oaid | 1 Tengine | 2026-10-15 | 6.3 Medium |
| A vulnerability has been found in OAID Tengine up to 1.12.0. This vulnerability affects the function get_tm_file_model of the file source/serializer/tmfile/tm2_serializer.c of the component tmfile Model Loader. Such manipulation of the argument offset_root leads to out-of-bounds read. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-108914 | 1 Edimax | 2 Br-6208ac, Br-6208ac Firmware | 2026-10-15 | 9.9 Critical |
| A flaw has been found in Edimax BR-6208AC 1.32. Affected by this issue is some unknown functionality of the file /goform/formWlSiteSurvey. This manipulation of the argument ifname causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-98085 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge Nicholas Carlini reported a bug in precision backtracking mechanism for BPF_LD | BPF_{IND,ABS} instructions. These instructions are modelled as two branches: - fallthrough; - implicit exit from current subprogram. The implicit exit case was not handled by the backtrack_insn() function. When backtracking such a path backtrack_insn() did not call bt_subprog_enter(), which meant that backtracking continued manipulating precision marks in a caller frame, while looking at instructions in a callee frame. This lead to segmentation faults during verification (see the selftest), or unsound state pruning. | ||||
| CVE-2026-93122 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uac: validate rate list length before storing UAC1 and UAC2 configfs rate-list attributes parse a comma-separated list of sampling rates and store each parsed value in fixed-size arrays. The arrays have UAC_MAX_RATES entries, but the store paths do not check that the input contains at most that many tokens before writing through opts->name##s[i++]. Writing more than ten rates therefore writes past the end of the p_srates[] or c_srates[] array in struct f_uac1_opts or struct f_uac2_opts. With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the UAC1 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac1.c:1669:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac1_opts_p_srate_store configfs_write_iter vfs_write ksys_write do_syscall_64 The same reproducer against the UAC2 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac2.c:2087:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac2_opts_p_srate_store configfs_write_iter vfs_write ksys_write do_syscall_64 Reject additional tokens once UAC_MAX_RATES entries have been parsed. Also keep the original kstrdup() pointer for kfree(), because strsep() advances the parsing cursor. Freeing the advanced cursor leaks the original buffer on successful parses and can free an interior pointer on some error paths. | ||||
| CVE-2026-92485 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARNING in bpf_tracing_link_release The trampoline could be corrupted by the blindly 'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier. 1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became 'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the trampoline would poke the target prog's nop insn using jmp insn instead of call insn. 2. Another fexit loaded with the same tail_call_reachable prog target. 'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'. 3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in 'tr->flags', the trampoline will fail to restore the prog's nop insn using call insn. [ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98 ... [ 3.428793] bpf_link_free+0x58/0x130 [ 3.429293] bpf_link_release+0x23/0x30 Fix the warning by updating 'tr->flags' with '|=' and lock. | ||||
| CVE-2026-90142 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix resize of the RX ring When a AF_XDP socket is attached, the virtnet_rx_resize should resize the rq->xsk_buffs XSK buffer array. Otherwise, when the size grows, the virtnet_rx_resume() causes a write past the end of the array. This is easily reproducable with ethtool -G ens3 rx 32 ./xdpsock -i eth0 -q 0 -r -z & ethtool -G eth0 rx 256 | ||||
| CVE-2026-90082 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Cap MSI-X vectors to the device MSI-X table size mana_gd_query_max_resources() sizes gc->num_msix_usable from resp.max_msix and the CPU count, but never from the device MSI-X table. On a 1792 vCPU M-series VM that yields 1793 while the table has 1024 entries, and mana_gd_setup_remaining_irqs() then walks indices 1..1792, running off the end of the region mapped by msix_map_region(): BUG: unable to handle page fault for address: ff8e347f8b99800c RIP: 0010:msix_prepare_msi_desc+0x7a/0x90 RAX: 0000000000004000 RBX: ff4330cb164ea780 RCX: ff8e347f8b998000 Call Trace: <TASK> __msi_domain_alloc_irqs+0x13a/0x440 msi_domain_alloc_irq_at+0x149/0x1b0 mana_gd_setup+0x351/0x890 mana_gd_probe+0x274/0x390 </TASK> RAX is index 1024 * PCI_MSIX_ENTRY_SIZE, one entry past the table. msi_insert_desc() does range check the index, but only against the MSI domain hwsize, which matches the table only for devices on an MSI parent domain. With a global PCI/MSI domain hwsize is MSI_XA_DOMAIN_SIZE, so nothing bounds the request. Cap num_msix_usable with pci_msix_vec_count(). | ||||
| CVE-2026-80546 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Improve CCA CPRB length and overflow checks The xcrb_msg_to_type6cprb_msgx() function lacks proper input validation, creating security vulnerabilities: 1. Integer overflow after CEIL4 alignment: Signed int variables could overflow during 4-byte boundary alignment, causing undersized buffer allocations or incorrect bounds checking. 2. Missing minimum size validation: The CPRBX structure is copied from userspace without verifying sufficient buffer length. Undersized buffers cause uninitialized memory access when reading structure fields like cprbx.cprb_len and cprbx.domain. 3. Arithmetic overflow in sum calculations: Adding control block and data block sizes could overflow, bypassing size checks and enabling buffer overflows. Fix by using size_t for length calculations, adding U32_MAX boundary checks after alignment, validating minimum control block size before copying from userspace, and detecting sum calculation overflows. | ||||
| CVE-2026-80545 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Improve EP11 CPRB length and overflow checks The xcrb_msg_to_type6_ep11cprb_msgx() function lacks proper input validation, creating security vulnerabilities: 1. Missing minimum size validation: The ep11_cprb structure and subsequent payload fields (pld_tag, pld_lenfmt) are copied from userspace without verifying sufficient buffer length. 2. Arithmetic overflow in length calculations: CEIL4 alignment could overflow, bypassing size checks and enabling buffer overflows. 3. The payload is asn1 encoded but the function just uses a simple c struct overlay to access some fields of the payload. Fix by using size_t for length calculations, adding U32_MAX boundary checks after alignment, and validating minimum request size and minimum reply size before copying from userspace. Do a very simple asn1 parsing of the payload up to the function value field. | ||||
| CVE-2026-108906 | 1 Netcore | 1 Nr268 | 2026-10-15 | 7.2 High |
| A vulnerability has been found in Netcore NR268 1.7.121109. This affects the function filter_arp_put_file_cgi of the file /router/filter_arp_put_file.cgi. The manipulation of the argument put_file leads to out-of-bounds read. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2023-4016 | 3 Fedoraproject, Procps Project, Redhat | 3 Fedora, Procps, Enterprise Linux | 2026-10-14 | 2.5 Low |
| Under some circumstances, this weakness allows a user who has access to run the “ps” utility on a machine, the ability to write almost unlimited amounts of unfiltered data into the process heap. | ||||
| CVE-2026-110698 | 1 Praat | 1 Praat | 2026-10-14 | 6.3 Medium |
| A security vulnerability has been detected in Praat up to 7.0.02. Affected is the function whisper_model_load of the file external/whispercpp/whisper.cpp of the component Model Loader. The manipulation of the argument n_dims leads to out-of-bounds write. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The identifier of the patch is a910d21a2705ef4cd16d91f29cdc8da1ab1a7221. To fix this issue, it is recommended to deploy a patch. The project maintainer confirms: "We did a quick fix (suggested fix 1) for Praat version 7.0.03, and scheduled a better fix (suggested fix 2)." | ||||
| CVE-2026-84058 | 1 Ibm | 1 Guardium Data Protection | 2026-10-14 | 8.1 High |
| IBM Guardium Data Protection 12.0, 12.1, and 12.2 is vulnerable to a buffer overrun in the TDS (Microsoft SQL Server) PRELOGIN packet decoder. A remote attacker who can send a specially crafted TDS PRELOGIN packet to a network monitored by an IBM Guardium Collector may cause a denial of service or potentially execute arbitrary code on the Collector appliance. | ||||
| CVE-2026-108822 | 1 Kamailio | 1 Kamailio | 2026-10-14 | 5.3 Medium |
| A vulnerability was detected in Kamailio up to 6.0.7/6.1.3. The affected element is the function isup_get_calling_party of the file src/modules/sipt/ss7_parser.c of the component sipt Module. The manipulation of the argument length results in buffer overflow. The attack may be performed from remote. Upgrading to version 6.0.8 and 6.1.4 is sufficient to fix this issue. The patch is identified as 3667bebf8d0bea07ed16218fd921d07db87aeb21. Upgrading the affected component is advised. | ||||
| CVE-2016-15060 | 1 Pcman | 1 Ftp Server | 2026-10-14 | 8.3 High |
| A vulnerability was found in PCMan FTP Server up to 2.0.7. This affects an unknown function of the component PORT Command Handler. The manipulation results in buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used. | ||||
| CVE-2026-109157 | 1 Trendnet | 2 Tew-432brp, Tew-432brp Firmware | 2026-10-14 | 9.9 Critical |
| A vulnerability was found in TRENDnet TEW-432BRP 3.10B20. Affected by this vulnerability is the function formTcpipSetup of the file /goform/formTcpipSetup. Performing a manipulation of the argument Name results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor confirms: "As this router was EOL'd in 2011, we have no way of testing if such vulnerability exists. We will notify our customers of a potential vulnerability on this product." This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-109109 | 1 Wavlink | 1 Wl-wn530be1-a | 2026-10-14 | 10 Critical |
| A vulnerability was detected in Wavlink WL-WN530BE1-A 251117. This vulnerability affects the function strcpy of the file /cgi-bin/ExportAllSettings.cgi of the component Settings Export CGI. Performing a manipulation of the argument HTTP_COOKIE/X-Cmd results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure. | ||||