Export limit exceeded: 414019 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (414019 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-115778 | 1 Twisted | 1 Twisted | 2026-10-23 | 7.5 High |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.conch.telnet.Telnet.dataReceived appends every byte received after IAC SB to a persistent subnegotiation buffer until IAC SE is received, without applying a maximum length. Telnet option negotiation occurs before authentication, so an unauthenticated peer can omit the terminator and continuously grow the buffer. The resulting memory exhaustion can terminate the process and every service it hosts. This issue is fixed in version 26.10.0rc1. | ||||
| CVE-2026-115877 | 1 Twisted | 1 Twisted | 2026-10-23 | 5.4 Medium |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.web.http.HTTPChannel.headerReceived rejects a NUL byte in an HTTP header value but accepts a bare carriage return or bare line feed. Because Twisted splits header lines only on CRLF, a hidden Content-Length header can remain folded into another value while a lenient front end treats the bare character as a line terminator. The resulting framing disagreement can smuggle a following request past front-end access controls, poison a shared connection or cache, and expose a later client to the wrong response. This issue is an incomplete-fix residual of earlier Twisted request-smuggling protections. This issue is fixed in version 26.10.0rc1. | ||||
| CVE-2026-58202 | 1 Open-reception | 1 Appointment-booking-software | 2026-10-23 | 8.3 High |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 2.0.0, the account-confirmation link in emails is built from the request Host header, with no allowlist. The unauthenticated POST /api/auth/resend-confirmation rotates a pending invitee's confirmation token and emails a link whose host comes from the request. An attacker who sends one resend-confirmation with Host: attacker.example and a pending invitee's email causes that invitee to receive a confirmation email whose only link points to the attacker. If the invitee clicks, the one-time confirmation token reaches the attacker, who then confirms the account on the real tenant domain and registers a passkey they control, taking over the account before the legitimate invitee ever uses it. All released versions through v1.1.0 are affected; no patched version exists yet. Reaching the app with a spoofed Host depends on the front proxy: the stock Caddy catch-all forwards it, while an operator who configures explicit per-tenant proxy blocks is not affected (see Details 4). The invite path builds links from the trusted tenant.domain (invite/+server.ts:204-210); the resend-confirmation path builds them from the request Host. This issue has been patched in version 2.0.0. | ||||
| CVE-2026-65825 | 1 Open-reception | 1 Appointment-booking-software | 2026-10-23 | 7.5 High |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. In versions 2.1.0 and prior, a returning client's six-digit booking PIN can be brute-forced online in the victim tenant. A successful guess yields the client's booking access token, granting access to that client's appointment tunnel, which holds their end-to-end-encrypted appointment data, and the ability to act as the client, for example adding or cancelling appointments in the tunnel. The bypass is cross-tenant: state owned by one tenant removes an authentication protection of a different tenant. This crossing of the tenant boundary is the basis for the scope-changed vector. At time of publication, there are no publicly available patches. | ||||
| CVE-2026-75524 | 1 Open-reception | 1 Appointment-booking-software | 2026-10-23 | 5.4 Medium |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 2.2.2, an attacker overbooks an agent, placing multiple appointments into a single time slot that the system is designed to keep exclusive. The number of overlapping appointments equals the number of concurrent requests, and one booking token is enough because the token is consumed after the insert. This results in the integrity of the booking-calendar breaking and availability being denied to other clients. This issue has been patched in version 2.2.2. | ||||
| CVE-2026-75525 | 1 Open-reception | 1 Appointment-booking-software | 2026-10-23 | 5.3 Medium |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. In versions 2.1.0 and prior, an unauthenticated attacker can store an arbitrary ML-KEM-768 public key under any existing user's identity in any tenant's staff-crypto recipient directory. The product's design guarantees that appointment data is end-to-end encrypted to staff members and that the staff recipient directory is not attacker-writable, so that even administrators and the operator cannot read patient data. This endpoint breaks that guarantee for an unauthenticated remote actor: it allows writing an arbitrary encryption recipient into the recipient directory of any tenant. The injected key receives the tunnel key of every appointment booked afterward in that tenant, because booking clients encrypt to all active staff keys. The attacker holds the corresponding secret key and is a persistent, unauthorized recipient of that key material. At time of publication, there are no publicly available patches. | ||||
| CVE-2026-79861 | 2026-10-23 | 9.8 Critical | ||
| There is a command injection vulnerability in AOS-10 that could lead to unauthenticated remote code execution by sending specially crafted PAPI packets. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system. | ||||
| CVE-2026-79863 | 2026-10-23 | 9.6 Critical | ||
| Buffer overflow vulnerabilities in the affected interface of AOS-10 or AOS-8 could allow an unauthenticated adjacent attacker to execute arbitrary code by sending specially crafted data to the affected interface. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system. | ||||
| CVE-2026-108548 | 1 Iflytek | 1 Astron-rpa | 2026-10-23 | 7.3 High |
| AstronRPA through 1.1.6 contains an authentication bypass vulnerability in the OpenResty gateway's auth_handler.lua that accepts any Bearer token without validation. Unauthenticated attackers can send arbitrary Bearer values to reach /api/resource/ and /api/rpa-ai-service/ routes and spoof X-User-Id or user_id headers to act as any user. | ||||
| CVE-2026-99041 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ip6_gre: remove obsolete ERSPAN PMTU update A tc tunnel_key action can attach a METADATA_IP_TUNNEL dst to an skb, and mirred can redirect it to a native ip6erspan device. The legacy PMTU update in ip6erspan_tunnel_xmit() treats that metadata dst as a route. Since it has no output device, dst_dev(dst)->mtu dereferences NULL. On v7.2 with KASAN, an initial UID/GID 65534 process with CapEff 0 used self-created user and network namespaces to trigger: KASAN: null-ptr-deref RIP: ip6erspan_tunnel_xmit+0x10fc/0x2cc0 Kernel panic - not syncing: Fatal exception in interrupt The update is obsolete. Commit fe1a4ca0a2b7 ("ip6_gre: process toobig in a better way") changed IPv6 GRE Too Big handling to update the underlay route and removed the equivalent block from __gre6_xmit(). ip6_tnl_xmit() then propagates the underlay PMTU to the overlay route. Remove the stale ERSPAN copy and its now-unused dst variable. This eliminates the metadata-dst dereference and keeps ERSPAN aligned with IPv6 GRE PMTU handling. | ||||
| CVE-2026-99044 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix use-after-free in dynamic port cleanup ice_dealloc_dynamic_port() uses dyn_port->vsi->idx to erase the dynamic port from pf->dyn_ports. However, it frees the VSI before reading the index for the erase, resulting in a use-after-free. Follow the reverse of the allocation order in ice_alloc_dynamic_port() by erasing the xarray entry before freeing the VSI. | ||||
| CVE-2026-110814 | 2026-10-23 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-108537 | 2026-10-23 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-108793 | 2026-10-23 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-96643 | 1 Python-pillow | 1 Pillow | 2026-10-23 | 7.5 High |
| Pillow is a Python imaging library. From 11.0.0 until 13.0.0, Exif.load() in src/PIL/Image.py repeatedly slices the remaining EXIF data while it begins with the six-byte Exif header. src/PIL/PngImagePlugin.py accepts an uncapped PNG eXIf chunk, so a file filled with repeated headers causes a new shrinking copy on every iteration and quadratic CPU work. The condition is reachable through Image.getexif(), Image._getexif(), and ImageOps.exif_transpose(), including common photo-upload rotation workflows. This issue is fixed in version 13.0.0. | ||||
| CVE-2026-96637 | 1 Python-pillow | 1 Pillow | 2026-10-23 | 6.5 Medium |
| Pillow is a Python imaging library. Prior to 13.0.0, SpiderImageFile.seek() in src/PIL/SpiderImagePlugin.py reparses a later SPIDER stack frame and replaces self._size without rerunning Image._decompression_bomb_check(). A tiny file can use a safe first frame to pass Image.open() and then declare very large dimensions in a later mode F frame. Loading that frame allocates approximately four bytes per attacker-declared pixel and can consume multiple gigabytes of memory. This issue is fixed in version 13.0.0. | ||||
| CVE-2026-79976 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | 7.1 High |
| The MCTP-over-I2C+GPIO target binding in subsys/pmci/mctp/mctp_i2c_gpio_target.c emulates a small pseudo-register file, where the bus controller first writes a register number and then writes or reads payload bytes. The selected register (b->reg_addr) and the data-phase flag (b->rxtx) were never cleared when the controller issued an I2C STOP, so after a completed transfer the target still had a data register selected while the packet buffer that register refers to had already been consumed and set to NULL by mctp_i2c_gpio_target_stop(). A controller on the bus can re-enter the same branch of mctp_i2c_gpio_target_stop() with a NULL buffer using two ordinary transactions and no authentication: first a normal packet write to MCTP_I2C_GPIO_RX_MSG_ADDR followed by STOP (which delivers and frees b->rx_pkt), then a bare read transaction followed by STOP. The failing read_requested() call leaves the stale state untouched and the I2C driver still delivers the STOP callback, which then calls mctp_bus_rx() with a NULL packet. The symmetric case exists on the transmit side, where the stale MCTP_I2C_GPIO_TX_MSG_ADDR selection dereferences b->tx_pkt->end after b->tx_pkt has been cleared and additionally signals b->tx_complete a second time, causing the next outbound packet to be dropped. The dereference happens in the I2C target interrupt handler, so on any target that traps accesses to address 0 the result is a fatal exception and a device reset or halt — a denial of service inflicted by any device able to act as controller on the shared management bus (for example compromised firmware on a peer MCTP endpoint or on the BMC). On parts where address 0 is readable, the impact degrades to a malformed packet buffer being handed to the MCTP stack and lost transmit packets. No attacker-controlled value is written and no confidentiality or integrity boundary is crossed. The fix resets b->reg_addr to MCTP_I2C_GPIO_INVALID_ADDR and clears b->rxtx at every STOP, so a new register must be selected before any data phase can run again. Only builds that opt into the experimental CONFIG_MCTP subsystem with CONFIG_MCTP_I2C_GPIO_TARGET=y are affected. | ||||
| CVE-2026-78119 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | 6.3 Medium |
| The Nuvoton NPCX eSPI driver parses Target-Attached-Flash (TAF) requests in espi_taf_parse() (drivers/espi/espi_npcx.c), taking the 12-bit length field directly out of the request header in the FLASHRXBUF FIFO. For write and RPMC OP1 requests it copied DIV_ROUND_UP(len, 4) words into struct espi_taf_pckt.src, a fixed 16-word (64-byte) member of a static structure, without ever comparing the length against that buffer or against the negotiated eSPI receive payload size (rx-plsize, 64 bytes on all in-tree NPCX/NPCK SoCs). Both the loop counter and the word count were uint8_t, so the copy ran up to 255 iterations. An eSPI controller that emits a flash request whose header claims a payload larger than the negotiated maximum therefore drives up to 239 32-bit stores past the end of the structure — roughly 956 bytes of out-of-bounds write into .bss — from the eSPI flash receive interrupt handler, while the source reads walk past the end of the 18-word FLASHRXBUF register array into neighbouring eSPI registers. The same unvalidated length was then passed on to flash_write() in espi_taf_npcx_flash_write() with the 64-byte src buffer as source, reading up to 4 KB of adjacent controller SRAM into SPI flash at a host-chosen address, where the host can read it back. A related fixed-size stack buffer in taf_npcx_completion_handler() was overflowed by four bytes on the maximum-size completion path on SoCs whose tx-plsize is 64. The defect is reachable only from the eSPI host side, and only by a request that violates the negotiated payload size, so it requires host firmware or bus-level control rather than ordinary host software; a compliant maximum-length write fits the buffer exactly and is handled correctly. Because TAF exists specifically so that the embedded controller arbitrates host access to shared flash (espi_taf_check_read_protect() / espi_taf_check_write_protect()), corrupting controller memory from a host-supplied field crosses the trust boundary the feature asserts; consequences range from controller crash or hang to corruption of driver state that gates the flash protection regions. The fix widens the counters, rejects any request whose word count exceeds both ARRAY_SIZE(FLASHRXBUF) - NPCX_ESPI_FLASH_HEADER_ADDRESS_LEN and NPCX_TAF_RX_PAYLOAD_WORDS (derived from the devicetree rx-plsize), marks such packets with a new invalid_flag so espi_taf_work() answers them with an unsuccessful completion instead of processing them, bounds the transmit payload against FLASHTXBUF, and adds a default case for unsupported cycle types. Only configurations with CONFIG_ESPI_TAF enabled on an NPCX/NPCK target are affected; no in-tree board enables it by default. | ||||
| CVE-2026-78118 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | 7 High |
| The kernel helper z_waitq_head() (kernel/include/wait_q.h) reads the head of a thread wait queue, but on SMP systems it was called from several places without holding the scheduler spinlock _sched_spinlock that serializes wait-queue mutation. The consequential call site is z_timer_expiration_handler() in kernel/timer.c, which held only the timer subsystem lock timer_lock while reading timer->wait_q and then unpending, setting the return value of, and readying the thread it obtained. halt_thread() in kernel/sched.c removes an aborted thread from its wait queue while holding only _sched_spinlock, so the two paths are not mutually exclusive. When the last waiter is removed on another CPU inside that window, sys_dlist_peek_head() can return the list sentinel — a pointer into the k_timer object itself — typed as a struct k_thread * (with CONFIG_WAITQ_SCALABLE, rb_get_min() can return an arbitrary node of a tree being restructured), or it can return a pointer to a thread that has already been unpended and, for dynamically allocated threads, freed. The handler then calls unpend_thread_no_timeout(), which performs a sys_dlist_remove() through pointers read from that object, and arch_thread_return_value_set(), which writes unconditionally through the pointer. The result is out-of-bounds and use-after-free writes in supervisor context, plus scheduler state corruption; a milder outcome is a thread that has re-pended elsewhere being woken with a success return value from an unrelated blocking call. All of the primitives needed to drive the interleaving — k_timer_start(), k_timer_status_sync(), k_thread_create() and k_thread_abort() — are system calls, so with CONFIG_USERSPACE enabled an unprivileged user-mode thread can attempt the race against kernel-owned data. Exploitation requires a multi-CPU build (CONFIG_MP_MAX_NUM_CPUS greater than one; the affected region is a no-op on uniprocessor targets), local code execution, and winning a narrow timing window, so the practical outcome is most often a kernel crash rather than controlled corruption. The fix splits the helper into z_waitq_head_locked() for callers that already hold the scheduler spinlock and a z_waitq_head() that acquires it, and brings the timer expiration handler's head read, unpend and ready under a single LOCK_SCHED_SPINLOCK region. | ||||
| CVE-2026-78117 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | 4.2 Medium |
| The Infineon PSOC 6 BLESS HCI driver in drivers/bluetooth/hci/hci_infineon_psoc6_bless.c stored the outgoing HCI packet descriptor in a file-scope variable, static cy_stc_ble_hci_tx_packet_info_t hci_tx_pkt. psoc6_bless_send() cleared and populated that descriptor's packetType, dataLength and data fields before acquiring psoc6_bless_operation_sem, so the driver's serialising semaphore protected only the call into Cy_BLE_SoftHciSendAppPkt() and not the shared state that call reads. The Bluetooth host does not guarantee a single HCI sender. Most transmissions are funnelled through the cooperative TX-processor work queue, but bt_hci_cmd_send() deliberately bypasses bt_dev.cmd_tx_queue for BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS and calls bt_send() directly from the caller's thread; that caller is bt_hci_host_num_completed_packets(), the acl_in_pool destroy callback, which runs on whichever thread drops the last reference to a received ACL buffer. CONFIG_BT_HCI_ACL_FLOW_CONTROL defaults to y on this driver's boards, and an application that returns -EINPROGRESS from its L2CAP recv callback and later calls bt_l2cap_chan_recv_complete() performs that unref from its own preemptible thread. A remote peer that generates Bluetooth traffic concurrently with the device's own transmissions raises the collision rate. When two senders interleave, the semaphore holder can hand the controller a descriptor whose dataLength comes from one net_buf and whose data pointer comes from another — or one whose buffer has already been returned to its pool. The controller then copies and transmits up to a full HCI/ACL payload starting at a shorter or recycled buffer, disclosing adjacent RAM contents to the connected peer; other interleavings duplicate one HCI packet and silently drop another, disrupting the link. The driver only reads through the shared descriptor, so no memory corruption or write primitive results, and the disclosed bytes are not attacker-chosen. The fix makes the descriptor a local variable in psoc6_bless_send(), removing the shared state; Cy_BLE_SoftHciSendAppPkt() copies the packet before returning, so it need not outlive the call. | ||||