Export limit exceeded: 413877 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 413877 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413877 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98911 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: fix the error path in dpaa2_switch_rx() In case of an error in dpaa2_switch_rx(), the dpaa2_switch_free_fd() function is called in order to free the FD. This is incorrect since the dpaa2_switch_free_fd() is intended to be used on Tx frame descriptors, meaning that it expects in the software annotation area of the FD data to find a valid skb pointer on which to call dev_kfree_skb(). Fix this by extracting the dma_unmap_page() from dpaa2_switch_build_linear_skb() directly into the dpaa2_switch_rx() function. This allows us to directly use free_pages() in case of an error before an SKB was created and kfree_skb() afterwards. | ||||
| CVE-2026-98910 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Unwind debug trap enable on copy_to_user failure If kfd_dbg_trap_enable() fails while copying runtime_info to userspace, it had already activated the trap, set debug_trap_enabled, taken an extra process reference, and opened the debug event file. Return -EFAULT without unwinding that state, leaving inconsistent trap state and a refcount imbalance that could break later DISABLE/ENABLE. On copy_to_user failure, deactivate the trap and undo the rest of the enable setup before returning. | ||||
| CVE-2026-98909 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: unregister devlink on port registration failure cpsw_probe() registers devlink before registering the CPSW ports. If cpsw_register_ports() fails, the error path only unregisters the notifiers and then releases the lower level resources. It does not undo the successful cpsw_register_devlink() call, leaving the devlink instance and its parameters registered after probe has failed. Add a devlink cleanup label for the path where devlink registration has already succeeded, and use it when port registration fails. | ||||
| CVE-2026-98908 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: microchip: sparx5: clean up PSFP resources on flower setup failure sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and stream filter resources before adding VCAP actions. If a later step fails, the resources allocated earlier in the function are not unwound. Add error paths to release the stream filter, flow meter and stream gate when setup fails after they have been acquired. Also make sparx5_psfp_fm_add() return the acquired flow-meter id before the existing-flow-meter early return. When an existing flow meter is reused, sparx5_psfp_fm_get() increments its pool reference count, but the caller previously kept psfp_fmid as 0. If a later setup step failed, the error path could try to delete flow-meter id 0 instead of the reused flow meter, leaving the incremented reference behind. | ||||
| CVE-2026-98907 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: protect sb_write_pointer() with invalidate lock sb_write_pointer() reads the super block from the block device page cache using read_cache_page_gfp(). This has the same race with BLKBSZSET as the one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set block size"). Take the mapping invalidate lock around read_cache_page_gfp() to serialize the read against block size changes. | ||||
| CVE-2026-98906 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: restore RX state on reload failure lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before reallocating the RX resources for the new MTU. If the allocation fails, the restore path puts these fields back before restarting RX. However, the reload path also updates rx->page_order and rx->max_mtu before calling lan966x_fdma_rx_alloc(). These fields are not restored on failure, so RX can be restarted with the old pages, old FDMA state and old page pool, but with the page geometry from the failed new MTU. This can make the XDP path advertise a frame size derived from the new page_order while the actual RX pages still come from the old allocation. For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be called with a frame size larger than the restored RX pages. lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If fdma_alloc_coherent() fails, the new page pool is destroyed, but the rollback path does not restore the per-port XDP RXQ mem model registration either. Save and restore rx->page_order and rx->max_mtu, and restore the old page pool registration for each port's XDP RXQ before RX is started again. This keeps the restored RX state consistent after a failed reload. | ||||
| CVE-2026-98905 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Properly acquire queue buffers in CRIU restore When kfd_queue_acquire_buffers() was split off from set_queue_properties_from_user(), set_queue_properties_from_criu() was missed. Thus, set_queue_properties_from_criu() is not filling out the buffer fields of queue_properties, which can come up when subsequent code expects them to be non-null. Add the proper call to kfd_queue_acquire_buffers(), and also use the right cast types in set_queue_properties_from_criu() (which were missed at the same time) (cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274714) | ||||
| CVE-2026-98904 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: imx: Use devm_pm_runtime_enable() sashiko complained about early usage of the device while probe isn't completed. This can be mitigated by delaying the pm_runtime_enable() into the removal path instead doing it early. This ensures that in an error case the device is removed (and imx_mu_shutdown()) before pm_runtime_disable() so we don't have to do this manually. For the order to work, lets move devm_mbox_controller_register() until after the pm-runtime part. So the reverse order will be mbox-controller removal followed by disabling pm runtime. Use devm_pm_runtime_enable(), remove manual pm_runtime_disable() invocations and move the pm_runtime handling in probe before devm_mbox_controller_register(). | ||||
| CVE-2026-98903 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: imx: Add a channel shutdown field sashiko complained about possible teardown problem. The scenario CPU 0 CPU 1 imx_mu_isr() imx_mu_shutdown() imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv->dcfg->type, cp->idx)); imx_mu_specific_rx() imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0); free_irq() The RX event remains enabled because in this short window the RX event was disabled in ->shutdown() while the interrupt was active and then enabled again by the ISR while ->shutdown waited in free_irq(). This race requires timing and if happens can be problematic on shared handlers if the "removed" channel triggers an interrupt. In this case the irq-core will shutdown the interrupt with the "nobody cared" message. Introduce imx_mu_con_priv::shutdown to signal that the channel is shutting down. This flag is set with the lock held (by imx_mu_xcr_clr_shut()). The unmask side uses imx_mu_xcr_set_act() which only enables the event if the channel has not been shutdown and serialises on the same lock. | ||||
| CVE-2026-98902 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: let stripe batch bm_seq comparison wrap-safe Once the 32-bit seq wraps, a newer bm_seq can look smaller than old, so .. covert to wrap-safe calculate way. | ||||
| CVE-2026-98900 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xen/gntalloc: validate grant count before allocation gntalloc_ioctl_alloc() allocates the grant-id array before checking whether the requested count fits within the global grant limit. Counts above that limit cannot succeed, so reject them before the user-controlled allocation reaches kcalloc(). Use a subtraction-based check while holding gref_mutex so adding the requested count cannot wrap. Also cast the count before advancing the per-file index so the page-size multiplication is performed in 64-bit arithmetic. | ||||
| CVE-2026-98899 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: mark the rcu locked areas properly When we bump the uref counter, there's no need to keep the rcu lock because the referred hash table can't disappear. Also, from the same reason in mtype_gc we need the rcu lock and not a spinlock. | ||||
| CVE-2026-98898 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm/si: Don't schedule thermal work when queue isn't initialized When DPM is turned off with the amdgpu.dpm=0 module parameter, the thermal work queue isn't initialized so we shouldn't schedule any work on it. (cherry picked from commit bd018d36171a695952c6d391471c279c9e05c8b2) | ||||
| CVE-2026-98897 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: don't hold ci->m_lock while waiting for a lease break ack When a cifs.ko client caches a read-handle (RH) lease via deferred close and a conflicting open arrives, ksmbd breaks the lease and waits for the acknowledgment in wait_for_break_ack() for up to OPLOCK_WAIT_TIME (35s). __smb_break_all_levII_oplock() runs that wait while holding ci->m_lock for read. cifs.ko reacts to a handle-lease break by closing the deferred handle rather than sending a lease break acknowledgment. That close path (close_id_del_oplock() -> opinfo_del()) takes ci->m_lock for write and is exactly what would wake the waiter, but it blocks on the read lock held by the waiting thread. The break is then resolved only by the 35s timeout, so xfstests generic/001 takes ~78s with leases enabled versus ~4s with oplocks only. Collect the target opinfos (each pinned with a reference) while holding ci->m_lock, then break them after releasing it, matching how smb_grant_oplock() already breaks a conflicting lease using only a reference. The reference keeps the opinfo (and its conn and lease) alive across the unlocked window, and a close racing the break is handled by the existing OPLOCK_CLOSING state check. Apply the same fix to the parent lease break paths. | ||||
| CVE-2026-55862 | 1 Pupnp | 1 Pupnp | 2026-10-23 | 6.5 Medium |
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.0, multiple ixml DOM traversal functions process deeply nested XML with unbounded recursion. The iterative XML parser accepts the document, but ixmlPrintDomTreeRecursive in ixml/src/ixml.c and ixmlNode_getElementsByTagNameRecursive, ixmlNode_getElementsByTagNameNSRecursive, ixmlNode_cloneNodeTreeRecursive, and ixmlNode_isAncestor in ixml/src/node.c recurse over firstChild and nextSibling links. An unauthenticated peer on the local network can supply deeply nested XML through a SOAP request, exhaust a service thread's stack, and crash the UPnP service. This is an incomplete-fix case for CVE-2021-28302 because its remediation converted ixmlNode_free but left these traversal paths recursive. This issue is fixed in 2.0.0. | ||||
| CVE-2026-115354 | 1 Mistune Project | 1 Mistune | 2026-10-23 | 6.5 Medium |
| Mistune before 3.3.0 contains a path traversal vulnerability in the opt-in Include directive that allows attackers to read local files by supplying relative or absolute include paths. Attackers who submit Markdown rendered via Markdown.read() can disclose files such as /etc/passwd and inject unescaped HTML or script content into rendered output. | ||||
| CVE-2026-98896 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Keep the domain reference while processing hotplug We process hotplug events in a workqueue that may run after the domain has been removed by tb_domain_remove(). For example if user unloads the driver while at the same time plugging a device router we may have scheduled tb_handle_hotplug() to run. Avoid possible UAF in this case by taking the domain reference before scheduling the hotplug handler in tb_queue_hotplug(). | ||||
| CVE-2026-98893 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Validate SENSOR_UPDATE payload size SENSOR_UPDATE carries one or more sensor readings after the fixed notification header. The parser derives the expected reading count from the sensor description, but it did not verify that the received payload contains those entries before parsing them. Reject truncated update notifications before reading the variable array. | ||||
| CVE-2026-98891 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate deauth frame length before reason access ieee80211_rx_mgmt_deauth() reads the deauth reason code before checking that the fixed field is actually present in the received frame. Validate the deauth frame length first and only then read the reason code. | ||||
| CVE-2026-98890 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: reject short monitor TX frames In monitor mode, lbs_hard_start_xmit() casts skb->data to a radiotap TX header, skips that header, and then copies the 802.11 destination address from offset 4 in the remaining frame. The generic length check only rejects zero-length and oversized skbs, so a short monitor frame can be read past the end of the skb data. Require enough bytes for the radiotap TX header and the destination address field before using the monitor-mode header layout. | ||||