Export limit exceeded: 23566 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23566 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-19576 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | 6.8 Medium |
| The Goodix GT9xx input driver in drivers/input/input_gt911.c reads the touch point count from the controller's status register and masks it with GT911_TOUCH_POINTS_MSK (0x0F), yielding a value of 0..15. In gt911_process() that value is used directly as the loop bound for filling point_reg[], a stack array sized to CONFIG_INPUT_GT911_MAX_TOUCH_POINTS, whose Kconfig range is 1..5 with a default of 1. No other check constrains the count; the driver relied only on a comment asserting that the controller had been programmed at init to report no more points than configured. Each loop iteration issues an I2C read of eight bytes straight into point_reg[i], so a controller that reports more points than the array holds causes up to 112 bytes of peer-supplied data to be written past the end of the array, over the stack frame of gt911_process() in the system workqueue thread. Two further loops then read out of bounds from the same array. Triggering it requires control of, or the ability to substitute, the I2C touch controller — plausible on the many supported boards where the GT9xx panel is a pluggable display module or shield rather than an on-PCB part; a spoofed device need only answer the init probes with a supported product ID and a checksum-valid config blob. The same overflow can also occur non-adversarially, with a GT9271-class panel that ignores the driver's touch-count programming and reports up to ten points, or with bus corruption of the single status byte. The impact is an out-of-bounds stack write with fully attacker-chosen content executing at kernel privilege, i.e. potential control-flow hijack on the host MCU, in addition to out-of-bounds reads and crashes. The attack vector is physical/local hardware access only; there is no network, USB, or syscall path to the defect. The fix clamps the reported count with min() against CONFIG_INPUT_GT911_MAX_TOUCH_POINTS before any array indexing. | ||||
| CVE-2026-105407 | 1 Dassault Systèmes | 1 Tuleap Enterprise Edition | 2026-10-15 | 8.8 High |
| An OS Command Injection vulnerability affecting Tuleap Enterprise Edition from 17.0 through 17.5 could allow an attacker to execute arbitrary commands on the server. | ||||
| CVE-2026-101947 | 1 Cellhubs | 1 Exiftool For Photo And Video | 2026-10-15 | N/A |
| ExifTool for photo and video 5.0.1-gms by CellHubs constructs shell command strings from file paths and invokes /system/bin/sh -c. In the CSV-export path, the selected media path is merely surrounded with single quotes; embedded single quotes are not escaped. | ||||
| CVE-2017-20283 | 1 Nxp | 1 Mqx | 2026-10-15 | 6.5 Medium |
| NXP MQX Classic before 5.0 contains an out-of-bounds write vulnerability in the RTCS UDP recvfrom() implementation. Improper enforcement of the application-supplied receive buffer length may allow a crafted UDP packet to overflow the destination buffer, resulting in memory corruption, or denial of service. | ||||
| CVE-2026-110734 | 1 Godotengine | 1 Godot Engine | 2026-10-15 | 2.5 Low |
| Godot Engine through 4.7.2 has a heap out-of-bounds write in the Radiance HDR (.hdr) image decoder (modules/hdr/image_loader_hdr.cpp). The run-length decoding loop expands RLE instructions read from the file into a buffer sized from the image dimensions, without validating that an instruction's repeat/copy count fits the remaining capacity of the row buffer. A crafted .hdr file therefore writes attacker-supplied bytes past the end of the heap allocation, with the overflow length and content controlled by the file. The defect is reached automatically when the product imports a crafted .hdr (e.g., when opening a project containing one), and at runtime in exported projects that load untrusted .hdr images. NOTE: the Supplier's position is that the research has identified "no security issues" because the required attacker access is outside of the current Godot Engine threat model. | ||||
| CVE-2026-111154 | 2026-10-15 | 6.1 Medium | ||
| libTiMidity through 0.2.8 contains a stack out-of-bounds write vulnerability in the SoundFont loader that allows attackers to corrupt stack memory via unchecked generator operators in parse_gen. Attackers can supply a crafted .sf2 file with out-of-range pgen/igen operator values to write chosen 16-bit values near the stack Layer object, causing crashes and stack memory corruption. | ||||
| CVE-2026-110875 | 1 Adplug Project | 1 Adplug | 2026-10-15 | 6.1 Medium |
| AdPlug through 2.4 contains a heap-based buffer overflow in CksmPlayer::update() in src/ksm.cpp that writes past the fixed databuf[2048] array without bounds checking. Attackers can supply a crafted .ksm module whose notes share one time slot to overflow the heap player object, causing memory corruption and denial of service. | ||||
| CVE-2026-111217 | 1 Netgate | 1 Pfsense | 2026-10-15 | 7.2 High |
| Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with Virtual IP edit privileges to execute commands as root by storing an unvalidated CARP VHID. Attackers can supply a VHID containing shell metacharacters that executes via interface_ipalias_configure() ifconfig calls or get_carp_interface_status() when CARP status is rendered. | ||||
| CVE-2026-111216 | 1 Netgate | 1 Pfsense | 2026-10-15 | 7.2 High |
| Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with gateway edit privileges to execute commands as root by injecting shell metacharacters into an IPv6 link-local zone index. Attackers can set a gateway Monitor IP whose unvalidated zone carries a payload, which start_dpinger() passes unescaped to the dpinger shell command when monitoring is applied. | ||||
| CVE-2026-103821 | 3 Adobe, Apple, Microsoft | 3 Substance 3d Designer, Macos, Windows | 2026-10-15 | 7.8 High |
| Substance3D - Designer is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-79841 | 2026-10-15 | 5.8 Medium | ||
| A buffer overflow vulnerability in HPE NonStop RDMA SERVICES NSK may cause out-of-bounds memory write, which may result in memory corruption. | ||||
| CVE-2026-84419 | 2026-10-15 | N/A | ||
| Out-of-bounds write vulnerability in Citrix Workspace app for Windows. This issue affects Workspace app for Windows: before 2603.20 CR, before LTSR 2607 Hotfix 1, and before LTSR 2507 CU3 Hotfix 1. | ||||
| CVE-2026-78384 | 1 Apache | 1 Cxf | 2026-10-15 | 7.5 High |
| CompressionUtils.inflate() decompressed attacker-controlled DEFLATE data with no output-size cap. A small (~KB) crafted payload could expand to gigabytes on the heap. Reachable via JWE decryption when zip=DEF (e.g. JoseSessionTokenProvider with RSA-OAEP key wrap) and via SAML redirect/POST binding token inflation — in both cases decompression happens before/independent of trust validation. Fix: Added a configurable maximum inflated-size cap (default 10 MiB, org.apache.cxf.compression-max-inflated-size system property) to CompressionUtils.inflate(); aborts with DataFormatException once exceeded. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. | ||||
| CVE-2026-103528 | 1 Thelia | 1 Thelia | 2026-10-15 | 5.4 Medium |
| Thelia 2.6.0 uses Smarty for email templates without properly restricting access to dangerous PHP functions. An authenticated administrator can inject malicious Smarty expressions into email templates via the messages configuration interface, and when the template is previewed or rendered, functions such as system(), exec(), file_put_contents(), and file_get_contents() can be executed with the privileges of the web process. This allows arbitrary OS command execution, file read/write operations, and RCE on the underlying server. | ||||
| CVE-2026-100232 | 2026-10-15 | 7.2 High | ||
| Post-authentication Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability has been identified in the SonicWall Network Security Manager (NSM) on-prem which in specific conditions could potentially enable a remote authenticated attacker to execute arbitrary OS commands, resulting in remote code execution. | ||||
| CVE-2026-101258 | 2 Ghostscript, Redhat | 2 Ghostscript, Enterprise Linux | 2026-10-15 | 7.8 High |
| A flaw was found in Ghostscript. When Ghostscript renders a crafted PostScript or EPS document, it can bypass the -dSAFER sandbox and execute arbitrary shell commands in the context of the Ghostscript process. The issue chains memory corruption in document parsing with disabling of internal path access controls at runtime. An attacker can deliver the document directly or through formats that delegate rendering to Ghostscript (for example EPS import or print conversion workflows). Successful exploitation can compromise confidentiality, integrity, and availability of data accessible to the process running Ghostscript. | ||||
| CVE-2026-86849 | 1 Redhat | 3 Enterprise Linux, Openshift, Openstack | 2026-10-15 | 6.5 Medium |
| A flaw was found in DPDK lib/vhost vhost-crypto. Integer overflow in chain length checks, and missing length checks on the RSA path, can overflow a host buffer in the vhost-crypto backend. | ||||
| CVE-2026-86846 | 1 Redhat | 3 Enterprise Linux, Openshift, Openstack | 2026-10-15 | 6.5 Medium |
| A flaw was found in DPDK lib/vhost vhost-crypto. A guest can supply an avail-ring descriptor index that is used without bounds checking, causing an out-of-bounds write in the host vhost-crypto backend. | ||||
| CVE-2026-86565 | 1 Redhat | 3 Enterprise Linux, Openshift, Openstack | 2026-10-15 | 8.2 High |
| A flaw was found in DPDK lib/vhost. A guest can desynchronize virtqueue size from inflight descriptor table size, causing an out-of-bounds write in the host vhost process. | ||||
| CVE-2026-57155 | 2026-10-15 | 9.9 Critical | ||
| OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the Firewall Alias GeoIP importer's process_zip() and process_gzip() paths in src/opnsense/scripts/filter/lib/alias/geoip.py use an unvalidated CSV country_code value to construct output filenames below /usr/local/share/GeoIP/alias. A user with Firewall Alias Edit privilege can configure an attacker-controlled GeoIP source URL and supply an archive whose country code traverses into another existing directory, causing attacker-controlled content to be written as root with an -IPv4 or -IPv6 suffix. A crafted newsyslog fragment and oversized log file can use the default hourly root cron job to execute commands as root, resulting in complete firewall compromise. This issue is fixed in version 26.1.11. | ||||