Export limit exceeded: 23528 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23528 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97853 | 1 Ericmj | 1 Decimal | 2026-10-15 | N/A |
| Memory Allocation with Excessive Size Value vulnerability in ericmj decimal allows Denial of Service. Decimal.round/3 builds the full result for the requested number of decimal places before the context precision (34 digits by default) is applied, so its cost grows with the places argument instead of with the size of the result. For positive places it appends places zero digits to the coefficient as a charlist before converting it to an integer, and for negative places it builds a charlist of -places zero digits. A single call such as Decimal.round(Decimal.new("1.5"), -50_000_000) allocates about 5.5 GB of memory, which can exhaust available memory and get the BEAM VM killed. The oldest releases instead loop once per decimal place, consuming CPU in proportion to places. Any application that passes a user-supplied number of decimal places or scale to Decimal.round/2 or Decimal.round/3 without bounding it is exposed. The input limits added for CVE-2026-32686 do not cover the places argument. This issue affects decimal: from 0.1.0 before 3.1.2. | ||||
| CVE-2026-6232 | 1 Semtech | 5 Lr1110 Modem-e, Lr1110 Transceiver, Lr1120 Transceiver and 2 more | 2026-10-15 | N/A |
| An out-of-bounds write vulnerability in the SPI host command interface of Semtech's LR11xx transceiver firmware where a crafted SPI host command with an oversized length field can cause the firmware to write up to 254 arbitrary bytes past the bounds of an internal, non-persistent memory buffer. Exploitation requires physical access to the device and logical access to the SPI bus. | ||||
| CVE-2026-55246 | 2026-10-15 | 7.8 High | ||
| bincookie is a header-only binarycookies parser. Prior to 0.1.9, bincookie_init_file() in bincookie.h allocates a buffer using the actual .binarycookies file length but trusts the file-controlled num_pages field as the loop bound for byte-swapping page_sizes entries. A crafted file can make the loop read and write beyond the heap allocation, and related unvalidated page sizes and cookie_offsets can drive additional out-of-bounds accesses in page and cookie iteration. Applications that parse an attacker-supplied binarycookies file may crash or suffer heap corruption that can potentially enable code execution. This issue is fixed in version 0.1.9. | ||||
| CVE-2026-49206 | 2026-10-15 | 2.9 Low | ||
| rapidcsv is a C++ CSV parser library. Prior to 8.99, RemoveColumn, InsertColumn, RemoveRow, InsertRow, and GetColumnNames converted size_t indexes to int before adding them to std::vector iterators. On 64-bit systems, in a CSV matrix dimension containing more than 2^31 elements, an index above INT_MAX could wrap to a negative iterator offset and point before the start of the vector, causing undefined behavior, heap memory corruption, or a crash. Triggering the issue requires an extremely large in-memory document, requiring tens of gigabytes of memory at minimum, so typical CSV documents are not practically affected. This issue is fixed in version 8.99. | ||||
| CVE-2026-45449 | 2026-10-15 | 8.3 High | ||
| : Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Unitronics Unitronics UniStream Pro/UniLogic. This issue affects Unitronics UniStream Pro/UniLogic: Unitronics UniStream Pro versions only (B10 / C10) – UniLogic versions prior to 1.41.329. | ||||
| CVE-2026-19736 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | 7.8 High |
| The NXP MCUX TRNG entropy driver in drivers/entropy/entropy_mcux_trng.c passed the caller's byte count straight to the vendor SDK routine TRNG_GetRandomData(). On i.MX RT5xx and RT6xx parts the SDK compiles its TRNG_SW_HEALTH_TESTS variant, which always copies whole 32-bit words and draws entropy rounded up to a multiple of 128 bytes. Its "caller buffer is full" guard tests dataSize == 0, so a request whose length is not a multiple of four makes dataSize underflow past zero and the SDK keeps writing into the caller's buffer for the entire extraction: a 1-byte request results in 128 bytes written, and any non-word-multiple length overflows by up to 127 bytes. entropy_get_entropy() is a syscall, and its verifier in drivers/entropy/entropy_handlers.c validates only the requested length via K_SYSCALL_MEMORY_WRITE(). With CONFIG_USERSPACE enabled, an unprivileged user-mode thread that has merely been granted the entropy device can therefore choose both the destination address and a length such as 1, and cause the kernel to write up to 127 bytes beyond the region it proved it owns. On these Cortex-M33 targets there is no MMU, so user partitions and kernel data share one SRAM and the overflow can land in adjacent kernel state. The same defect is reached from kernel mode by any caller requesting a non-word-multiple length, including getentropy() and, in builds where sys_csrand_get()/sys_rand_get() resolve to the hardware generator, sys_rand8_get() and sys_rand16_get(). Impact is memory corruption of up to 127 bytes immediately following the supplied buffer — typically the caller's stack in kernel-mode use, or memory outside the caller's partition when driven through the syscall. The overflow offset is fully determined by the requested length and is therefore deterministic, while the written content is uncontrolled TRNG output; the practical consequences range from crashes and unpredictable state corruption to opportunistic escalation when kernel bookkeeping such as object permission bitmaps is overwritten. The affected devices are those where the MCUX SDK enables TRNG_SW_HEALTH_TESTS (MIMXRT595S, MIMXRT555S, MIMXRT533S, MIMXRT685S, MIMXRT633S), on which the TRNG is the zephyr,entropy chosen node; other SoCs using this driver take the SDK path that clamps the copy size and are unaffected. The fix routes any unaligned prefix and any sub-word tail through a local bounce word and hands the SDK only word-multiple sizes, so the SDK's word-granular writes can no longer pass the end of the caller's buffer. | ||||
| CVE-2026-19669 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | 7.8 High |
| The user-mode syscall verifiers z_vrfy_fuel_gauge_get_props() and z_vrfy_fuel_gauge_set_props() in drivers/fuel_gauge/fuel_gauge_syscall_handlers.c declared two variable-length arrays, union fuel_gauge_prop_val k_vals[len] and fuel_gauge_prop_t k_props[len], sized directly by the caller-supplied len argument. len is an unvalidated size_t taken straight from the syscall ABI, and the VLAs were allocated before any check at all — including before the K_SYSCALL_DRIVER_FUEL_GAUGE() object-permission check. The subsequent k_usermode_from_copy() calls validated only that the user source buffer was readable; the kernel destination was never bounds-checked, since it was sized by the same attacker-chosen len. Any thread running in user mode with CONFIG_USERSPACE enabled can invoke fuel_gauge_get_props() or fuel_gauge_set_props() with a large len. This first displaces the supervisor stack pointer by an arbitrary attacker-chosen amount — Zephyr does not build with stack-clash probing, so the displacement itself does not fault, and the nested calls made by the verifier then write frames below the privileged stack. If the caller has been granted access to a fuel-gauge device object, the memcpy inside k_usermode_from_copy() additionally writes len * sizeof(union fuel_gauge_prop_val) bytes of fully attacker-controlled data starting well below the stack base. CONFIG_PRIVILEGED_STACK_SIZE defaults to 1024 bytes, so a len of roughly 170 already exhausts it. The result is an out-of-bounds write in supervisor mode with attacker-controlled length and, on the permitted path, attacker-controlled content — a break out of the user-mode sandbox into kernel memory, leading to kernel code execution or a system crash. A stack guard region does not contain it, because the copy begins below the guard and walks upward, corrupting unprotected memory before the guard is reached. The fix removes the kernel-side copies entirely and validates the caller's arrays in place with K_SYSCALL_MEMORY_ARRAY_READ() / K_SYSCALL_MEMORY_ARRAY_WRITE(), which also handle the len * size multiplication overflow; this is safe because neither fuel_gauge_prop_t nor union fuel_gauge_prop_val contains embedded pointers. | ||||
| CVE-2026-19576 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | 6.8 Medium |
| The Goodix GT9xx input driver in drivers/input/input_gt911.c reads the touch point count from the controller's status register and masks it with GT911_TOUCH_POINTS_MSK (0x0F), yielding a value of 0..15. In gt911_process() that value is used directly as the loop bound for filling point_reg[], a stack array sized to CONFIG_INPUT_GT911_MAX_TOUCH_POINTS, whose Kconfig range is 1..5 with a default of 1. No other check constrains the count; the driver relied only on a comment asserting that the controller had been programmed at init to report no more points than configured. Each loop iteration issues an I2C read of eight bytes straight into point_reg[i], so a controller that reports more points than the array holds causes up to 112 bytes of peer-supplied data to be written past the end of the array, over the stack frame of gt911_process() in the system workqueue thread. Two further loops then read out of bounds from the same array. Triggering it requires control of, or the ability to substitute, the I2C touch controller — plausible on the many supported boards where the GT9xx panel is a pluggable display module or shield rather than an on-PCB part; a spoofed device need only answer the init probes with a supported product ID and a checksum-valid config blob. The same overflow can also occur non-adversarially, with a GT9271-class panel that ignores the driver's touch-count programming and reports up to ten points, or with bus corruption of the single status byte. The impact is an out-of-bounds stack write with fully attacker-chosen content executing at kernel privilege, i.e. potential control-flow hijack on the host MCU, in addition to out-of-bounds reads and crashes. The attack vector is physical/local hardware access only; there is no network, USB, or syscall path to the defect. The fix clamps the reported count with min() against CONFIG_INPUT_GT911_MAX_TOUCH_POINTS before any array indexing. | ||||
| CVE-2026-105407 | 1 Dassault Systèmes | 1 Tuleap Enterprise Edition | 2026-10-15 | 8.8 High |
| An OS Command Injection vulnerability affecting Tuleap Enterprise Edition from 17.0 through 17.5 could allow an attacker to execute arbitrary commands on the server. | ||||
| CVE-2026-101947 | 1 Cellhubs | 1 Exiftool For Photo And Video | 2026-10-15 | N/A |
| ExifTool for photo and video 5.0.1-gms by CellHubs constructs shell command strings from file paths and invokes /system/bin/sh -c. In the CSV-export path, the selected media path is merely surrounded with single quotes; embedded single quotes are not escaped. | ||||
| CVE-2017-20283 | 1 Nxp | 1 Mqx | 2026-10-15 | 6.5 Medium |
| NXP MQX Classic before 5.0 contains an out-of-bounds write vulnerability in the RTCS UDP recvfrom() implementation. Improper enforcement of the application-supplied receive buffer length may allow a crafted UDP packet to overflow the destination buffer, resulting in memory corruption, or denial of service. | ||||
| CVE-2026-110734 | 1 Godotengine | 1 Godot Engine | 2026-10-15 | 2.5 Low |
| Godot Engine through 4.7.2 has a heap out-of-bounds write in the Radiance HDR (.hdr) image decoder (modules/hdr/image_loader_hdr.cpp). The run-length decoding loop expands RLE instructions read from the file into a buffer sized from the image dimensions, without validating that an instruction's repeat/copy count fits the remaining capacity of the row buffer. A crafted .hdr file therefore writes attacker-supplied bytes past the end of the heap allocation, with the overflow length and content controlled by the file. The defect is reached automatically when the product imports a crafted .hdr (e.g., when opening a project containing one), and at runtime in exported projects that load untrusted .hdr images. NOTE: the Supplier's position is that the research has identified "no security issues" because the required attacker access is outside of the current Godot Engine threat model. | ||||
| CVE-2026-111154 | 2026-10-15 | 6.1 Medium | ||
| libTiMidity through 0.2.8 contains a stack out-of-bounds write vulnerability in the SoundFont loader that allows attackers to corrupt stack memory via unchecked generator operators in parse_gen. Attackers can supply a crafted .sf2 file with out-of-range pgen/igen operator values to write chosen 16-bit values near the stack Layer object, causing crashes and stack memory corruption. | ||||
| CVE-2026-110875 | 1 Adplug Project | 1 Adplug | 2026-10-15 | 6.1 Medium |
| AdPlug through 2.4 contains a heap-based buffer overflow in CksmPlayer::update() in src/ksm.cpp that writes past the fixed databuf[2048] array without bounds checking. Attackers can supply a crafted .ksm module whose notes share one time slot to overflow the heap player object, causing memory corruption and denial of service. | ||||
| CVE-2026-111217 | 1 Netgate | 1 Pfsense | 2026-10-15 | 7.2 High |
| Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with Virtual IP edit privileges to execute commands as root by storing an unvalidated CARP VHID. Attackers can supply a VHID containing shell metacharacters that executes via interface_ipalias_configure() ifconfig calls or get_carp_interface_status() when CARP status is rendered. | ||||
| CVE-2026-111216 | 1 Netgate | 1 Pfsense | 2026-10-15 | 7.2 High |
| Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with gateway edit privileges to execute commands as root by injecting shell metacharacters into an IPv6 link-local zone index. Attackers can set a gateway Monitor IP whose unvalidated zone carries a payload, which start_dpinger() passes unescaped to the dpinger shell command when monitoring is applied. | ||||
| CVE-2026-103821 | 3 Adobe, Apple, Microsoft | 3 Substance 3d Designer, Macos, Windows | 2026-10-15 | 7.8 High |
| Substance3D - Designer is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-79841 | 2026-10-15 | 5.8 Medium | ||
| A buffer overflow vulnerability in HPE NonStop RDMA SERVICES NSK may cause out-of-bounds memory write, which may result in memory corruption. | ||||
| CVE-2026-84419 | 2026-10-15 | N/A | ||
| Out-of-bounds write vulnerability in Citrix Workspace app for Windows. This issue affects Workspace app for Windows: before 2603.20 CR, before LTSR 2607 Hotfix 1, and before LTSR 2507 CU3 Hotfix 1. | ||||
| CVE-2026-78384 | 1 Apache | 1 Cxf | 2026-10-15 | 7.5 High |
| CompressionUtils.inflate() decompressed attacker-controlled DEFLATE data with no output-size cap. A small (~KB) crafted payload could expand to gigabytes on the heap. Reachable via JWE decryption when zip=DEF (e.g. JoseSessionTokenProvider with RSA-OAEP key wrap) and via SAML redirect/POST binding token inflation — in both cases decompression happens before/independent of trust validation. Fix: Added a configurable maximum inflated-size cap (default 10 MiB, org.apache.cxf.compression-max-inflated-size system property) to CompressionUtils.inflate(); aborts with DataFormatException once exceeded. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. | ||||