| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Validation of Consistency within Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a network-adjacent configured BGP peer to cause a denial of service by sending a specifically malformed BGP MCAST-TREE update and this NLRI is then attempted to be readvertised. |
| An Improper Validation of Consistency within Input vulnerability in the l2cpd process of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent unauthenticated Layer 2 attacker to cause a denial of service in associated Layer 2 control protocols via a crafted MVRP Ethernet frame sent to an MVRP-enabled interface. |
| Improper Validation of Consistency within Input vulnerability in Erlang OTP ssl (tls_handshake_1_3, ssl_handshake and tls_client_ticket_store modules) allows a malicious TLS 1.3 server to cause a denial of service of the ssl application on the client node.
The TLS 1.3 client decodes the extensions of a NewSessionTicket message as if they came from EncryptedExtensions. It therefore accepts a 0-length early_data extension, a form that is only valid in ClientHello and EncryptedExtensions. With {session_tickets, auto}, the client stores the ticket in the node-global tls_client_ticket_store. On the next automatic resumption, tls_handshake_1_3:get_max_early_data/1 crashes the store with a case_clause. Repeated crashes can exceed the restart intensity of the ssl supervisors, which use the rest_for_one strategy, and take down ssl for all connections on the node.
This issue affects OTP from OTP 23.3 before OTP 27.3.4.19, OTP 28.5.0.8, and OTP 29.1.2, corresponding to ssl from 10.3 before 11.2.12.14, 11.6.0.7, and 11.7.8. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid combining some incoming suboptions
Some MPTCP suboptions are mutually exclusive according to the RFC8684,
but also because in different places, the code doesn't expect some
combinations to be present. That's specially true for suboptions that
would be present twice, but with different attributes.
The new restrictions are the same as the ones applied on the output
side, with mptcp_write_options. The same rules can be reused with a
small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks
this option [1], which is not the case on Linux. Here are the rules:
Which options can be used together?
X: mutually exclusive
O: often used together
C: can be used together in some cases
P: could be used together but we prefer not to (optimisations)
| Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC |
|------|------|------|------|------|------|------|------|------|
| MPC |------|------|------|------|------|------|------|------|
| MPJ | X |------|------|------|------|------|------|------|
| DSS | X | X |------|------|------|------|------|------|
| ADD | X | X | P |------|------|------|------|------|
| RM | C | C | C | P |------|------|------|------|
| PRIO | X | C | C | C | C |------|------|------|
| FAIL | X | X | C | X | X | X |------|------|
| FC | X | X | P | X | X | X | X |------|
| RST | X | X | X | X | X | X | O | O |
|------|------|------|------|------|------|------|------|------|
The only difference is with the 'P': another stack could send and
ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be
allowed.
A few points of attention:
- In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is
no reason to add it with a SYN. Note that even with a 4th ACK, it
doesn't seem to be useful, except when IDs are known in advance via
another channel. Better not to break that.
- Now, combining both an MP_CAPABLE and an MP_JOIN will no longer
result to a reject of the two options, but only the second suboption
is ignored. That seems OK to do that for this unexpected error. At
least now all inconsistent combinations are handled the same way.
This could change later in next. This also means the explicit checks
for having both MPC + MPJ in subflow.c will now be unreachable.
That's fine, they will be removed in a follow-up patch.
- In case of conflicting combinations, the extra suboption(s) is/are
ignored: having such combinations either means the remote peer is
buggy, or is evil. The simplest action is then taken in this case:
stop processing the current suboption.
- In mp_opt->suboptions, there is also a bit reserved to the checksum,
which can be used in an MP_CAPABLE and a DSS. Each time a DSS option
can be used in parallel with another option, the checksum can be set,
so the verification is combined into a new OPTIONS_MPTCP_DSS macro.
- An MP_CAPABLE ACK can carry a Data-Level Length, and an optional
Checksum: they are the same as the ones found in a DSS, because a DSS
cannot be used in parallel to an MP_CAPABLE. Similarly, even if there
is room, a DSS cannot be used with an MP_JOIN. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss()
Sashiko points out that the user can specify WQs sharing the same CQ as a
part of the uAPI and this will trigger the WARN_ON() then go on to corrupt
the kernel.
Just reject it outright and fail the QP creation. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix handling of NFSEXP_PNFS in the netlink codepath
The rework of how block layouts were checked moved the check for
NFSEXP_PNFS out of nfsd4_setup_layout_type() and into the callers. That
patch didn't account for the new call in nfsd4_setup_layout_type(). |
| Improper Access Control vulnerability in Apache Traffic Server.
This issue affects Apache Traffic Server: from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3.
Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fixes the issue.
This CVE supersedes CVE-2026-41920, whose record listed the affected 9.x versions as 9.0.0 through 9.1.14 and the fixed version as 9.1.15. All 9.2.x releases before 9.2.15 are affected. |
| `@bsv/wallet-toolbox` provides BRC-100 wallet signing and storage components, while `@bsv/wallet-toolbox-client` and `@bsv/wallet-toolbox-mobile` provide client-focused distributions for standard and mobile applications using wallet storage services. A vulnerability in these packages causes transactions created through a remote `StorageClient` to trust output locking scripts returned by the storage provider without verifying that they match the outputs requested by the caller. A malicious or compromised storage provider can substitute a recipient script or inject an additional output, causing the wallet to sign and broadcast a transaction that redirects funds while the application and user interface continue to display the intended recipient. Source and npm publication history indicate that stable versions `@bsv/wallet-toolbox` and `@bsv/wallet-toolbox-client` from 1.1.47 through 2.3.3, and `@bsv/wallet-toolbox-mobile` from its initial 1.3.21 release through 2.3.3, are affected. All three packages are patched in version 2.4.0. Applications unable to upgrade should avoid remote `StorageClient` providers, use local storage, or independently verify every transaction output’s locking script and value against the original request before signing |
| Improper validation of consistency within input in Windows TCP/IP allows an unauthorized attacker to bypass a security feature over a network. |
| A flaw was found in the keycloak-services component of Keycloak, which handles OpenID Connect (OIDC) authentication flows. The issue occurs because the security check designed to prevent HTTP parameter pollution only inspects the query portion of a redirect URL and ignores the fragment portion. When a client is configured with a wildcard redirect URI, an attacker can use this to inject duplicate security parameters into the login response. If a client application is not configured correctly, it might trust the attacker's injected data instead of the real security information from Keycloak, leading to session fixation or account confusion. |
| In the Linux kernel, the following vulnerability has been resolved:
block: validate user space vectors during extraction
The bio-based drivers don't necessarily check the alignment split, and
stacking block drivers don't always handle a misalignment detected after
submitting the bio. Validate user vectors against the device's
dma_alignment as the bio is built from the iov_iter, rejecting
misaligned early with -EINVAL. |
| The rpcap client code that processes a RPCAP_MSG_PACKET message received from the server incorrectly validates its headers. A malicious server can send a crafted message and cause the client to treat up to 20 bytes of the client process memory beyond the end of the buffer as if it was a part of the captured packet. |
| The OpenRGB network protocol allows attackers to cause memory exhaustion and out-of-bounds memory reads and writes by passing inconsistent data. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: fail early if address range parameters are invalid
The comment on top of `struct damon_region` clearly says that
For any use case, @ar should be non-zero positive size.
which is now verified in damon_verify_new_region() if the kernel is built
with DAMON_DEBUG_SANITY.
The WARN_ONCE() can be triggered if the mtier sample module is enabled
before node{0,1}_{start,end}_addr have been properly initialized, which is
obviously not good.
------------[ cut here ]------------
start 0 >= end 0
WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118, CPU#59: bash/341468
Call trace:
damon_new_region+0xf4/0x118 (P)
damon_set_regions+0xfc/0x3c0
damon_sample_mtier_build_ctx+0xe8/0x3a8
damon_sample_mtier_start+0x1c/0x90
damon_sample_mtier_enable_store+0x98/0xb0
param_attr_store+0xb4/0x128
module_attr_store+0x2c/0x50
sysfs_kf_write+0x58/0x90
kernfs_fop_write_iter+0x16c/0x238
vfs_write+0x2c0/0x370
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
invoke_syscall+0xa8/0x118
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x54/0x370
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
---[ end trace 0000000000000000 ]---
Note that the same issue can happen if detect_node_addresses is true, and
node 0 or 1 is memoryless. Fix it together by checking the validity of
parameters right before damon_new_region() and fail early if they're
invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate index block header more strictly
Modify ntfs_index_block_inconsisent() to perform stricter validation of
INDEX_HEADER geometry in INDX blocks, and update
ntfs_lookup_inode_by_name() to use that function to validate INDX
blocks. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate resident index root values on lookup
Resident $INDEX_ROOT values carry index header fields that callers
consume after lookup. Some callers already validate parts of the layout
before walking entries, but those checks are scattered and do not cover
all root header invariants, such as entries_offset alignment and lower
bound, index_length, and allocated_size consistency.
The resident root resize paths now keep these header fields consistent
while the value size changes: ntfs_ir_truncate() lowers
index.allocated_size before shrinking the resident value, and
ntfs_ir_reparent() grows the resident value before publishing a larger
root header. Lookup-time validation can therefore cover these invariants
without tripping over the driver's own resize paths.
Add $INDEX_ROOT to the minimum resident value size table and validate the
resident index header fields before returning the attribute from lookup.
Require 8-byte aligned index header fields, a sane entries_offset, an
index_length within allocated_size, allocated_size within the resident
value, and enough entry space for at least an index entry header.
The shared validator already rejects non-resident records for
resident-only attribute types, including $INDEX_ROOT. |
| CVAT is an open source interactive video and image annotation tool for computer vision. From 2.17.0 until 2.72.0, a user with write access to a CVAT job can submit a batch automatic annotation request to RequestViewSet.create with inconsistent task and job IDs, and because the task ID determines the single active request slot, block automatic annotation for another task whose ID is known. This issue is fixed in version 2.72.0. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx()
put_prev_task_scx() warns when a runnable task drops to a lower sched_class
without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have
kept it running. Core scheduling breaks that: a forced-idle SMT sibling
reschedules through the core_pick fast path in pick_next_task(), which skips
pick_task_scx() and thus balance_one(), so a runnable task can drop to idle
with ENQ_LAST unset.
Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core
scheduling forced the idle, while a match (or core scheduling off) still
catches a genuine missing-ENQ_LAST drop. |
| A flaw was found in Keycloak, an open-source identity and access management solution. When a client application is configured to accept broad redirect Uniform Resource Identifiers (URIs), a remote attacker can manipulate the authentication process by crafting a special web address. If a user clicks this link, the client application might incorrectly prioritize attacker-controlled information over legitimate data. This vulnerability, known as HTTP parameter pollution, could allow an attacker to bypass security measures or gain unauthorized access to resources. |
| A flaw was found in the Keycloak keycloak-services component, which handles the management of identity providers. The issue occurs when a delegated administrator updates an OIDC identity provider using a masked client secret sentinel value. Due to improper validation, Keycloak reuses the existing real secret even if security-sensitive fields like the token URL have been changed, allowing an attacker to redirect and capture the secret. |
