| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An out-of-bounds read vulnerability was found in smbCalcSize in fs/smb/client/netmisc.c in the Linux Kernel. This issue could allow a local attacker to crash the system or leak internal kernel information. |
| A use-after-free flaw was found in qdisc_graft in net/sched/sch_api.c in the Linux Kernel due to a race problem. This flaw leads to a denial of service issue. If patch ebda44da44f6 ("net: sched: fix race condition in qdisc_graft()") not applied yet, then kernel could be affected. |
| drivers/usb/mon/mon_bin.c in usbmon in the Linux kernel before 5.19.15 and 6.x before 6.0.1 allows a user-space client to corrupt the monitor's internal memory. |
| A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code. |
| In Expat (aka libexpat) before 2.4.5, there is an integer overflow in storeRawNames. |
| xmltok_impl.c in Expat (aka libexpat) before 2.4.5 lacks certain validation of encoding, such as checks for whether a UTF-8 character is valid in a certain context. |
| An out-of-bounds read flaw was found in the Linux kernel’s TeleTYpe subsystem. The issue occurs in how a user triggers a race condition using ioctls TIOCSPTLCK and TIOCGPTPEER and TIOCSTI and TCXONC with leakage of memory in the flush_to_ldisc function. This flaw allows a local user to crash the system or read unauthorized random data from memory. |
| basic/unit-name.c in systemd prior to 246.15, 247.8, 248.5, and 249.1 has a Memory Allocation with an Excessive Size Value (involving strdupa and alloca for a pathname controlled by a local attacker) that results in an operating system crash. |
| When sending malicous data to kernel by ioctl cmd FBIOPUT_VSCREENINFO,kernel will write memory out of bounds. |
| A race condition in the Linux kernel before 5.5.7 involving VT_RESIZEX could lead to a NULL pointer dereference and general protection fault. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_acl_tcam: Fix stack corruption
When tc filters are first added to a net device, the corresponding local
port gets bound to an ACL group in the device. The group contains a list
of ACLs. In turn, each ACL points to a different TCAM region where the
filters are stored. During forwarding, the ACLs are sequentially
evaluated until a match is found.
One reason to place filters in different regions is when they are added
with decreasing priorities and in an alternating order so that two
consecutive filters can never fit in the same region because of their
key usage.
In Spectrum-2 and newer ASICs the firmware started to report that the
maximum number of ACLs in a group is more than 16, but the layout of the
register that configures ACL groups (PAGT) was not updated to account
for that. It is therefore possible to hit stack corruption [1] in the
rare case where more than 16 ACLs in a group are required.
Fix by limiting the maximum ACL group size to the minimum between what
the firmware reports and the maximum ACLs that fit in the PAGT register.
Add a test case to make sure the machine does not crash when this
condition is hit.
[1]
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120
[...]
dump_stack_lvl+0x36/0x50
panic+0x305/0x330
__stack_chk_fail+0x15/0x20
mlxsw_sp_acl_tcam_group_update+0x116/0x120
mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110
mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20
mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0
mlxsw_sp_acl_rule_add+0x47/0x240
mlxsw_sp_flower_replace+0x1a9/0x1d0
tc_setup_cb_add+0xdc/0x1c0
fl_hw_replace_filter+0x146/0x1f0
fl_change+0xc17/0x1360
tc_new_tfilter+0x472/0xb90
rtnetlink_rcv_msg+0x313/0x3b0
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x244/0x390
netlink_sendmsg+0x1e4/0x440
____sys_sendmsg+0x164/0x260
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xc0
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
Set the starting uABI size of KVM's guest FPU to 'struct kvm_xsave',
i.e. to KVM's historical uABI size. When saving FPU state for usersapce,
KVM (well, now the FPU) sets the FP+SSE bits in the XSAVE header even if
the host doesn't support XSAVE. Setting the XSAVE header allows the VM
to be migrated to a host that does support XSAVE without the new host
having to handle FPU state that may or may not be compatible with XSAVE.
Setting the uABI size to the host's default size results in out-of-bounds
writes (setting the FP+SSE bits) and data corruption (that is thankfully
caught by KASAN) when running on hosts without XSAVE, e.g. on Core2 CPUs.
WARN if the default size is larger than KVM's historical uABI size; all
features that can push the FPU size beyond the historical size must be
opt-in.
==================================================================
BUG: KASAN: slab-out-of-bounds in fpu_copy_uabi_to_guest_fpstate+0x86/0x130
Read of size 8 at addr ffff888011e33a00 by task qemu-build/681
CPU: 1 PID: 681 Comm: qemu-build Not tainted 5.18.0-rc5-KASAN-amd64 #1
Hardware name: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x45
print_report.cold+0x45/0x575
kasan_report+0x9b/0xd0
fpu_copy_uabi_to_guest_fpstate+0x86/0x130
kvm_arch_vcpu_ioctl+0x72a/0x1c50 [kvm]
kvm_vcpu_ioctl+0x47f/0x7b0 [kvm]
__x64_sys_ioctl+0x5de/0xc90
do_syscall_64+0x31/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Allocated by task 0:
(stack is not available)
The buggy address belongs to the object at ffff888011e33800
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 0 bytes to the right of
512-byte region [ffff888011e33800, ffff888011e33a00)
The buggy address belongs to the physical page:
page:0000000089cd4adb refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e30
head:0000000089cd4adb order:2 compound_mapcount:0 compound_pincount:0
flags: 0x4000000000010200(slab|head|zone=1)
raw: 4000000000010200 dead000000000100 dead000000000122 ffff888001041c80
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888011e33900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888011e33980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888011e33a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff888011e33a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888011e33b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint |
| In the Linux kernel, the following vulnerability has been resolved:
veth: ensure skb entering GRO are not cloned.
After commit d3256efd8e8b ("veth: allow enabling NAPI even without XDP"),
if GRO is enabled on a veth device and TSO is disabled on the peer
device, TCP skbs will go through the NAPI callback. If there is no XDP
program attached, the veth code does not perform any share check, and
shared/cloned skbs could enter the GRO engine.
Ignat reported a BUG triggered later-on due to the above condition:
[ 53.970529][ C1] kernel BUG at net/core/skbuff.c:3574!
[ 53.981755][ C1] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[ 53.982634][ C1] CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc5+ #25
[ 53.982634][ C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 53.982634][ C1] RIP: 0010:skb_shift+0x13ef/0x23b0
[ 53.982634][ C1] Code: ea 03 0f b6 04 02 48 89 fa 83 e2 07 38 d0
7f 08 84 c0 0f 85 41 0c 00 00 41 80 7f 02 00 4d 8d b5 d0 00 00 00 0f
85 74 f5 ff ff <0f> 0b 4d 8d 77 20 be 04 00 00 00 4c 89 44 24 78 4c 89
f7 4c 89 8c
[ 53.982634][ C1] RSP: 0018:ffff8881008f7008 EFLAGS: 00010246
[ 53.982634][ C1] RAX: 0000000000000000 RBX: ffff8881180b4c80 RCX: 0000000000000000
[ 53.982634][ C1] RDX: 0000000000000002 RSI: ffff8881180b4d3c RDI: ffff88810bc9cac2
[ 53.982634][ C1] RBP: ffff8881008f70b8 R08: ffff8881180b4cf4 R09: ffff8881180b4cf0
[ 53.982634][ C1] R10: ffffed1022999e5c R11: 0000000000000002 R12: 0000000000000590
[ 53.982634][ C1] R13: ffff88810f940c80 R14: ffff88810f940d50 R15: ffff88810bc9cac0
[ 53.982634][ C1] FS: 0000000000000000(0000) GS:ffff888235880000(0000) knlGS:0000000000000000
[ 53.982634][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 53.982634][ C1] CR2: 00007ff5f9b86680 CR3: 0000000108ce8004 CR4: 0000000000170ee0
[ 53.982634][ C1] Call Trace:
[ 53.982634][ C1] <TASK>
[ 53.982634][ C1] tcp_sacktag_walk+0xaba/0x18e0
[ 53.982634][ C1] tcp_sacktag_write_queue+0xe7b/0x3460
[ 53.982634][ C1] tcp_ack+0x2666/0x54b0
[ 53.982634][ C1] tcp_rcv_established+0x4d9/0x20f0
[ 53.982634][ C1] tcp_v4_do_rcv+0x551/0x810
[ 53.982634][ C1] tcp_v4_rcv+0x22ed/0x2ed0
[ 53.982634][ C1] ip_protocol_deliver_rcu+0x96/0xaf0
[ 53.982634][ C1] ip_local_deliver_finish+0x1e0/0x2f0
[ 53.982634][ C1] ip_sublist_rcv_finish+0x211/0x440
[ 53.982634][ C1] ip_list_rcv_finish.constprop.0+0x424/0x660
[ 53.982634][ C1] ip_list_rcv+0x2c8/0x410
[ 53.982634][ C1] __netif_receive_skb_list_core+0x65c/0x910
[ 53.982634][ C1] netif_receive_skb_list_internal+0x5f9/0xcb0
[ 53.982634][ C1] napi_complete_done+0x188/0x6e0
[ 53.982634][ C1] gro_cell_poll+0x10c/0x1d0
[ 53.982634][ C1] __napi_poll+0xa1/0x530
[ 53.982634][ C1] net_rx_action+0x567/0x1270
[ 53.982634][ C1] __do_softirq+0x28a/0x9ba
[ 53.982634][ C1] run_ksoftirqd+0x32/0x60
[ 53.982634][ C1] smpboot_thread_fn+0x559/0x8c0
[ 53.982634][ C1] kthread+0x3b9/0x490
[ 53.982634][ C1] ret_from_fork+0x22/0x30
[ 53.982634][ C1] </TASK>
Address the issue by skipping the GRO stage for shared or cloned skbs.
To reduce the chance of OoO, try to unclone the skbs before giving up.
v1 -> v2:
- use avoid skb_copy and fallback to netif_receive_skb - Eric |
| A use-after-free vulnerability was found in drivers/nvme/target/tcp.c` in `nvmet_tcp_free_crypto` due to a logical bug in the NVMe/TCP subsystem in the Linux kernel. This issue may allow a malicious user to cause a use-after-free and double-free problem, which may permit remote code execution or lead to local privilege escalation. |
| A flaw was found in m2crypto. This issue may allow a remote attacker to decrypt captured messages in TLS servers that use RSA key exchanges, which may lead to exposure of confidential or sensitive data. |
| A flaw was found in the Linux kernel's TUN/TAP functionality. This issue could allow a local user to bypass network filters and gain unauthorized access to some resources. The original patches fixing CVE-2023-1076 are incorrect or incomplete. The problem is that the following upstream commits - a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid"), - 66b2c338adce ("tap: tap_open(): correctly initialize socket uid"), pass "inode->i_uid" to sock_init_data_uid() as the last parameter and that turns out to not be accurate. |
| An out-of-bounds memory access flaw was found in the Linux kernel’s TUN/TAP device driver functionality in how a user generates a malicious (too big) networking packet when napi frags is enabled. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| An issue was discovered in the Linux kernel before 6.5.9, exploitable by local users with userspace access to MMIO registers. Incorrect access checking in the #VC handler and instruction emulation of the SEV-ES emulation of MMIO accesses could lead to arbitrary write access to kernel memory (and thus privilege escalation). This depends on a race condition through which userspace can replace an instruction before the #VC handler reads it. |
| An issue was discovered in l2cap_sock_release in net/bluetooth/l2cap_sock.c in the Linux kernel before 6.4.10. There is a use-after-free because the children of an sk are mishandled. |
| A use-after-free vulnerability in the Linux kernel's net/sched: sch_qfq component can be exploited to achieve local privilege escalation.
When the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().
We recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8. |
