| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Serialize multi-part Get/Set Feature transfers
A Get or Set Feature payload larger than the mailbox payload size is
split into several mailbox commands. mbox_mutex only serializes
individual mailbox commands and is dropped between iterations of these
loops. Nothing serializes the multi-part transfer as a whole.
cxl_get_feature() and cxl_set_feature() are reachable concurrently
from fwctl (per-fd RPCs run under a read-held registration lock) and
from the EDAC scrub/ECS/repair paths, so two transfers to the same
mailbox can interleave their parts and corrupt the device's transfer
context.
Add a per-mailbox feat_mutex and hold it across the whole transfer in
both functions. It nests outside mbox_mutex (which is taken inside
cxl_internal_send_cmd()), and is taken nowhere else, so no lock-ordering
inversion is introduced. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARNING in bpf_tracing_link_release
The trampoline could be corrupted by the blindly
'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier.
1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became
'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the
trampoline would poke the target prog's nop insn using jmp insn instead
of call insn.
2. Another fexit loaded with the same tail_call_reachable prog target.
'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'.
3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in
'tr->flags', the trampoline will fail to restore the prog's nop insn
using call insn.
[ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98
...
[ 3.428793] bpf_link_free+0x58/0x130
[ 3.429293] bpf_link_release+0x23/0x30
Fix the warning by updating 'tr->flags' with '|=' and lock. |
| In the Linux kernel, the following vulnerability has been resolved:
md: remove REQ_NOWAIT support from raid1/10/456
REQ_NOWAIT support in md personalities that can block internally is
fundamentally incomplete. While reads can avoid some blocking paths,
write requests can still encounter cases where one mirror succeeds while
another returns -EAGAIN. At that point md cannot distinguish queue
pressure from a real device failure, so it can neither record a bad
block nor safely retry the write without REQ_NOWAIT, leaving mirrors
with divergent data.
Rather than continue advertising REQ_NOWAIT support for personalities
that cannot implement it correctly, remove it from raid1, raid10 and
raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to
their underlying devices; stacked limits will still clear the feature if
any component device lacks REQ_NOWAIT support. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: flush active metadata block group at btree_writepages() start
btree_writepages() writes the btree inode's dirty metadata in ascending
logical address order. On a zoned filesystem only one metadata and one
system block group is active for writing at a time, and
check_bg_is_active() (via btrfs_check_meta_write_pointer()) pivots the
active block group as writeback moves from one block group to the next.
If the active block group sits at a higher logical address than another
block group that also holds dirty metadata, the ascending walk reaches
the lower one first and, to write it, has to finish the active block
group and activate the lower one. It cannot finish a block group that
still has unsent IO, and during WB_SYNC_ALL && !for_sync (commit)
writeback it deliberately refuses to wait for that IO under
fs_info->zoned_meta_io_lock, as that can deadlock. The pivot thus cannot
issue the submission itself either, so it gives up:
btrfs_check_meta_write_pointer() returns -EAGAIN, which
btrfs_write_and_wait_transaction() treats as fatal and aborts the
transaction, forcing the filesystem read-only. This happens
intermittently under metadata-heavy relocation (e.g. fstests btrfs/187).
Flush the active metadata and system block groups at the start of
btree_writepages(), under the fs_info->zoned_meta_io_lock it already
holds, so they have no unsent IO left and the later pivot can finish
them and make forward progress. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix max_qid race between configfs and controller allocation
The function nvmet_subsys_attr_qid_max_store() can race against
nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified.
Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes:
ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1);
and at this exact point, a userspace process changes max_qid to 128,
nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It
attempts to delete active controllers to force a reconnect, but the
new controller won't be deleted because it hasn't been added to the
subsys->ctrls list yet.
nvmet_alloc_ctrl() then proceeds and adds the new controller to the
subsys->ctrls list. Later, when nvmet_install_queue() is called, it
will see max_qid set to 128, but the memory allocated for sqs is only
sized for 64 entries. This results in a KASAN out-of-bounds warning
and potential memory corruptions.
Fix this by protecting the queue allocations and list insertion in
nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because
nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem)
to modify the attribute, this safely prevents the configfs writer from
modifying max_qid during controller creation.
Copy the max_qid from the subsystem to the controller's structure
during the allocation; ctrl->max_qid never changes as long as the
controller remains in LIVE state, so this will prevent similar race
conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize oplock close with pending break ownership
close may abort an in-flight oplock break while another breaker already
holds an opinfo reference. Releasing pending_break wakes that waiter, but
without serializing the close transition with bit acquisition it can become
a new break owner through the test_and_set_bit() fast path. It can then
overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for
a dying opinfo.
Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode
list. Serialize that transition, pending_break acquisition, and
OPLOCK_ACK_WAIT setup with an opinfo state lock. A breaker which loses
the race releases its ownership and returns -ENOENT. Explicitly wake
pending_break waiters during close so they can observe the terminal state.
Also prevent ACK and timeout paths from replacing OPLOCK_CLOSING with
OPLOCK_STATE_NONE. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: arp/nd proxy: fix reading neigh ha
Currently neigh ha address is read directly, but that can result in
torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot
to take a stable snapshot of the address. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Use children field for rcu head and add memory barriers
When an eventfs inode is freed, it sets ei->is_freed and then uses its
ei->list to add it to the srcu link list as the list field is a union with
the rcu list head. As the ei->list is used to iterate over an SRCU
protected list without taking the eventfs_mutex, there's nothing stopping
the iteration over that list to see the ei->rcu instead of the ei->list
and it will read a corrupt target.
To fix this, change the union of the rcu list head with the children list.
On freeing the eventfs inode, set the is_free and execute a smp_wmb()
before adding the eventfs inode to the SRCU list.
On iteration of the ei->children list, at the start, execute a smp_rmb()
and then read the is_freed of the ei to see if the children list is still
valid. If is_freed is set, then the ei_child read is not valid and the
loop should exit immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: take nh->lock for f6i_list walks in replace check and notify
fib6_check_nh_list() and __nexthop_replace_notify() walk nh->f6i_list
during an RTNL-serialized nexthop replace without holding nh->lock. IPv6
RTM_NEWROUTE/RTM_DELROUTE run without RTNL and mutate that list under
nh->lock (fib6_add_rt2node_nh(), fib6_purge_rt()), so both walks race a
concurrent route delete that unlinks and frees a fib6_info:
BUG: KASAN: slab-use-after-free in rt6_fill_node.isra.0 (net/ipv6/route.c:5799)
Read of size 4 at addr ffff888014607e64 by task exploit/143
rt6_fill_node.isra.0 (net/ipv6/route.c:5799)
fib6_rt_update (net/ipv6/route.c:6412)
__nexthop_replace_notify (net/ipv4/nexthop.c:2542)
rtm_new_nexthop (net/ipv4/nexthop.c:2554)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
BUG: KASAN: slab-use-after-free in fib6_check_nh_list (net/ipv4/nexthop.c:1605)
Read of size 8 at addr ffff888014a7d068 by task exploit/142
fib6_check_nh_list (net/ipv4/nexthop.c:1605)
rtm_new_nexthop (net/ipv4/nexthop.c:2575)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
Both walks only read the entries and take no tb6_lock, so protect them
with nh->lock; fib6_rt_update() uses gfp_any(), which returns GFP_ATOMIC
under the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to
match the previous behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Block region delete during region creation
Expand the range lock, rename it "regions_lock", to disable region deletion
in the critical period between construct_region() and attach_target(), as
well as the period between device_add() and registering the remove actions.
Otherwise, userspace can confuse the kernel. It can violate the assumption
the region stays registered through the completion of cxl_add_to_region().
It can violate the assumption that devm_add_action_or_reset() is working
with a live 'struct cxl_region'.
It is ok for the region to disappear outside of those windows as that
mirrors device hotplug flows where the proper locks are held. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by
bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ
handler, which cannot take bus.lock. This allows concurrent device
addition/removal in the I3C core to modify the list while it is being
traversed, potentially leading to use-after-free or crashes.
Remove the dependency on the bus device list and introduce a dedicated
lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained
under hci->lock. Update the array when IBIs are enabled or disabled,
so that it always reflects the set of devices allowed to generate IBIs.
Also update when IBIs are freed, to cover the corner case when an IBI is
freed without first being disabled (e.g. oldedev in
i3c_master_add_i3c_dev_locked()).
Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new
array, and add a lockdep assertion to enforce that hci->lock is held
by callers.
Demote a message in PIO and DMA IBI handling, from an error to a debug
message, because there is a race window when the condition can arise
normally. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing barriers when accessing stream->subrequests locklessly
The list of subrequests attached to stream->subrequests is accessed without
locks by netfs_collect_read_results() and netfs_collect_write_results(),
and then they access subreq->flags without taking a barrier after getting
the subreq pointer from the list. Relatedly, the functions that build the
list don't use any sort of write barrier when constructing the list to make
sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if
no lock is taken.
Fix this by:
(1) Add a new list_add_tail_release() function that uses a release barrier
to set the pointer to the new member of the list.
(2) Add a new list_first_entry_or_null_acquire() function that uses an
acquire barrier to read the pointer to the first member in a list (or
return NULL).
(3) Use list_add_tail_release() when adding a subreq to ->subrequests.
(4) Use list_first_entry_or_null_acquire() when initially accessing the
front of the list (when an item is removed, the pointer to the new
front iterm is obtained under the same lock). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the locking used by afs_get_link()
The afs filesystem in the kernel doesn't do locking correctly for symbolic
links. There are a number of problems:
(1) It doesn't do any locking around afs_read_single() to prevent races
between multiple ->get_link() calls, thereby allowing the possibility
of leaks.
(2) It doesn't use RCU barriering when accessing the buffer pointers
during RCU pathwalk.
(3) It can race with another thread updating the contents of the symlink
if a third party updated it on the server.
Fix this by the following means:
(0) Move symlink handling into its own file as this makes it more
complicated.
(1) Take the validate_lock around afs_read_single() to prevent races
between multiple ->get_link() calls.
(2) Keep a separate copy of the symlink contents with an rcu_head. This
is always going to be a lot smaller than a page, so it can be
kmalloc'd and save quite a bit of memory. It also needs a refcount
for non-RCU pathwalk.
(3) Split the symlink read and write-to-cache routines in afs from those
for directories.
(4) Discard the I/O buffer as soon as the write-to-cache completes as this
is a full page (plus a folio_queue).
(5) If there's no cache, discard the I/O buffer immediately after reading
and copying if there is no cache. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max77705: Free allocated workqueue and fix removal order
Use devm interface for allocating workqueue to fix two bugs at the same
time:
1. Driver leaks the memory on remove(), because the workqueue is not
destroyed.
2. Driver allocates workqueue and then registers interrupt handlers
with devm interface. This means that probe error paths will not use a
reversed order, but first destroy the workqueue and then, via devm
release handlers, free the interrupt.
The interrupt handler schedules work on this exact workqueue, thus if
interrupt is hit in this short time window - after destroying
workqueue, but before devm() frees the interrupt - the schedulled
work will lead to use of freed memory.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply (power_supply_changed()) status, thus there
is no point to run it for memory reclaim. Note that dev_name() is not
directly used in second argument to prevent possible unlikely parsing
any "%" character in device name as format. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/64s: Fix unmap race with PMD migration entries
The following race is possible with migration swap entries or
device-private THP entries. e.g. when move_pages is called on a PMD THP
page, then there maybe an intermediate state, where PMD entry acts as
a migration swap entry (pmd_present() is true). Then if an munmap
happens at the same time, then this VM_BUG_ON() can happen in
pmdp_huge_get_and_clear_full().
This patch fixes that.
Thread A: move_pages() syscall
add_folio_for_migration()
mmap_read_lock(mm)
folio_isolate_lru(folio)
mmap_read_unlock(mm)
do_move_pages_to_node()
migrate_pages()
try_to_migrate_one()
spin_lock(ptl)
set_pmd_migration_entry()
pmdp_invalidate() # PMD: _PAGE_INVALID | _PAGE_PTE | pfn
set_pmd_at() # PMD: migration swap entry (pmd_present=0)
spin_unlock(ptl)
[page copy phase] # <--- RACE WINDOW -->
Thread B: munmap()
mmap_write_downgrade(mm)
unmap_vmas() -> zap_pmd_range()
zap_huge_pmd()
__pmd_trans_huge_lock()
pmd_is_huge(): # !pmd_present && !pmd_none -> TRUE (swap entry)
pmd_lock() -> # spin_lock(ptl), waits for Thread A to release ptl
pmdp_huge_get_and_clear_full()
VM_BUG_ON(!pmd_present(*pmdp)) # HITS!
[ 287.738700][ T1867] ------------[ cut here ]------------
[ 287.743843][ T1867] kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:187!
cpu 0x0: Vector: 700 (Program Check) at [c00000044037f4f0]
pc: c000000000094ca4: pmdp_huge_get_and_clear_full+0x6c/0x23c
lr: c000000000645dec: zap_huge_pmd+0xb0/0x868
sp: c00000044037f790
msr: 800000000282b033
current = 0xc0000004032c1a00
paca = 0xc000000004fe0000 irqmask: 0x03 irq_happened: 0x09
pid = 1867, comm = a.out
kernel BUG at :187!
Linux version 6.19.0-12136-g14360d4f917c-dirty (powerpc64le-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #27 SMP PREEMPT Sun Feb 22 10:38:56 IST 2026
enter ? for help
[link register ] c000000000645dec zap_huge_pmd+0xb0/0x868
[c00000044037f790] c00000044037f7d0 (unreliable)
[c00000044037f7d0] c000000000645dcc zap_huge_pmd+0x90/0x868
[c00000044037f840] c0000000005724cc unmap_page_range+0x176c/0x1f40
[c00000044037fa00] c000000000572ea0 unmap_vmas+0xb0/0x1d8
[c00000044037fa90] c0000000005af254 unmap_region+0xb4/0x128
[c00000044037fb50] c0000000005af400 vms_complete_munmap_vmas+0x138/0x310
[c00000044037fbe0] c0000000005b0f1c do_vmi_align_munmap+0x1ec/0x238
[c00000044037fd30] c0000000005b3688 __vm_munmap+0x170/0x1f8
[c00000044037fdf0] c000000000587f74 sys_munmap+0x2c/0x40
[c00000044037fe10] c000000000032668 system_call_exception+0x128/0x350
[c00000044037fe50] c00000000000d05c system_call_vectored_common+0x15c/0x2ec
---- Exception: 3000 (System Call Vectored) at 0000000010064a2c
SP (7fff9b1ee9c0) is in userspace
0:mon> zh
commit a30b48bf1b24 ("mm/migrate_device: implement THP migration of zone device pages"),
enabled migration for device-private PMD entries. Hence this is one
other path where this warning could get trigger from.
------------[ cut here ]------------
WARNING: arch/powerpc/mm/book3s64/hash_pgtable.c:199 at hash__pmd_hugepage_update+0x48/0x284, CPU#3: hmm-tests/1905
Modules linked in: test_hmm
CPU: 3 UID: 0 PID: 1905 Comm: hmm-tests Tainted: G B W L N 7.0.0-rc1-01438-g7e2f0ee7581c #21 PREEMPT
Tainted: [B]=BAD_PAGE, [W]=WARN, [L]=SOFTLOCKUP, [N]=TEST
Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries
NIP [c000000000096b70] hash__pmd_hugepage_update+0x48/0x284
LR [c000000000096e7c] hash__pmdp_huge_get_and_clear+0xd0/0xd4
Call Trace:
[c000000604707670] [c000000004e102b8] 0xc000000004e102b8 (unreliable)
[c000000604707700] [c00000000064ec3c] set_pmd_migration_entry+0x414/0x498
[c000000604707760] [c00000000063e5a4] migrate_vma_col
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix data loss caused by incorrect use of nat_entry flag
Data loss can occur when fsync is performed on a newly created file
(before any checkpoint has been written) concurrently with a checkpoint
operation. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_flush_nat_entries
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return false
SPO and lost 'file A'
f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC
flags for the nat_entry, but this does not mean that the checkpoint has
actually completed successfully. However, f2fs_need_inode_block_update()
checks these flags and incorrectly assumes that the checkpoint has
finished.
The root cause is that the semantics of IS_CHECKPOINTED and
HAS_LAST_FSYNC are only guaranteed after the checkpoint write fully
completes.
This patch modifies f2fs_need_inode_block_update() to acquire the
sbi->node_write lock before reading the nat_entry flags, ensuring that
once IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, the
checkpoint operation has already completed. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix race condition in TX timestamp ring cleanup
Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map()
that can cause a NULL pointer dereference.
ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag
after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map
call on another CPU to dereference the tstamp_ring, which could lead to
a NULL pointer dereference.
CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map()
--------------------------------|---------------------------------
tx_ring->tstamp_ring = NULL |
| ice_is_txtime_cfg() -> true
| tstamp_ring = tx_ring->tstamp_ring
| tstamp_ring->count // NULL deref!
flags &= ~ICE_TX_FLAGS_TXTIME |
Fix by:
1. Reordering ice_free_tx_tstamp_ring() to clear the flag before
NULLing the pointer, with smp_wmb() to ensure proper ordering.
2. Adding smp_rmb() in ice_tx_map() after the flag check to order the
flag read before the pointer read, using READ_ONCE() for the
pointer, and adding a NULL check as a safety net.
3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using
atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag
operations throughout the driver:
- ICE_TX_RING_FLAGS_XDP
- ICE_TX_RING_FLAGS_VLAN_L2TAG1
- ICE_TX_RING_FLAGS_VLAN_L2TAG2
- ICE_TX_RING_FLAGS_TXTIME |
| Gitea's repository migration and pull mirror egress checks could be bypassed with a hostname that returns multiple DNS answers, because the address that was validated was not necessarily the address Git later connected to. A low-privileged user who can create migrations or mirrors could direct the server to internal services, reading from and writing to reachable internal Git or HTTP endpoints. Content from internal responses could additionally be disclosed through migration and mirror error messages. |
