| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: Remove device debugfs before releasing devres
VFIO device debugfs files created with debugfs_create_devm_seqfile()
store a devres allocated debugfs_devm_entry as inode private data.
vfio_unregister_group_dev() currently calls vfio_device_del() before
vfio_device_debugfs_exit(), but device_del() releases devres. This can
leave debugfs entries visible with stale inode private data while
unregister waits for userspace references to drain.
Remove the per-device debugfs tree before vfio_device_del(). The debugfs
view is diagnostic only, so losing it at the start of unregister is
preferable to preserving entries whose backing storage may already have
been released.
Complete the teardown by clearing the per-device debugfs root after
removal. This matches the global debugfs root cleanup and prevents
future users from mistaking a removed dentry for a live debugfs tree
during the remainder of unregister. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: use a u64 stride when cleaning up the offsets array
Allocation's Drop walks the offsets array (binder_size_t = u64 entries),
cleaning up the objects, but it used usize instead of u64 for both the
stride and the per-entry read.
On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels
it walks the 8-byte entries in 4-byte steps, iterating an N-entry array
2N times, and reads the always-zero high word as offset 0, cleaning up
the object at offset 0 N extra times. As a result the referenced node or
handle ends up with a lower reference count than it actually has (a
refcount over-decrement), and binder's reference accounting is corrupted;
for example, the owner can be notified of a strong reference release
(BR_RELEASE) even though references still remain.
Change the stride to u64, and read each entry as a u64, narrowing it to
usize with try_into().
On 32-bit ARM, when this over-decrement would drive a count below zero,
the driver's existing refcount guard refuses it and fires:
rust_binder: Failure: refcount underflow! |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption. |
| In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, client terminated DNS-over-QUIC (DoQ) queries are not accounted properly by Unbound resulting in low-cost inflation of the waiting number of replies for already in-flight resolution queries. This results in degradation of resolution service for new clients for already in-flight queries. A malicious actor can exploit the vulnerability by issuing DoQ queries for query names that need resolution and proceeding on immediately terminating the query by one of STOP_SENDING/RESET_STREAM/CONNECTION_CLOSE QUIC frames. Those terminated DoQ queries are not properly counted for and keep inflating the number of waiting replies for in-flight queries. When the maximum is reached, it results in silent query drops for new clients needing resolution for already in-flight queries. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. Additionally, a malicious actor needs access to multiple source IPs to bypass the by-default configured 'wait-limit' option. |
| Netty is a network application framework for development of protocol servers and clients. In versions 4.2.0.Final through 4.2.15.Final and 4.1.0.Final through 4.1.135.Final, a remote unauthenticated peer can leak one direct `ByteBuf` per HTTP/2 `DATA` frame in applications that enable HTTP/2 content decompression via `DelegatingDecompressorFrameListener`. When a `DATA` frame is processed for a stream whose decompressor has already been closed, `Http2Decompressor.decompress(...)` calls `decompressor.writeInbound(data.retain())` and does not release the retained buffer on the error path, eventually exhausting direct memory and crashing the JVM. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
__set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold()
before scheduling the delayed work. The normal path in
l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the
end, but the early return when chan->conn is NULL skips the put,
leaking the reference.
Add the missing l2cap_chan_put() before the early return. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix mm_struct reference leak in aie2_populate_range()
aie2_populate_range() jumps back to the again label without calling
mmput(mm), leaking a reference to the mm_struct.
Add the missing mmput() before jumping to again. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifname
A reader in l2tp_session_get_by_ifname() can return a pointer to a
session whose refcount has reached zero. The getter takes its
reference with plain refcount_inc(), but every other session getter
in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the
corresponding _get_next variants) uses refcount_inc_not_zero()
because the IDR/RCU lookup can race with refcount_dec_and_test() ->
l2tp_session_free() -> kfree_rcu(). The ifname getter is the only
outlier; the inconsistency was raised on-list after 979c017803c4
("l2tp: use list_del_rcu in l2tp_session_unhash").
A reader inside rcu_read_lock_bh() that matches session->ifname can
be preempted between the strcmp() and the refcount_inc(). If the
last reference drops on another CPU in that window, the reader's
refcount_inc() runs on a counter that has reached zero. refcount_t
catches the addition-on-zero, prints "refcount_t: addition on 0;
use-after-free", saturates the counter, and returns the saturated
pointer to the caller. Session memory is held live by the in-flight
RCU read section, but the kfree_rcu() callback queued from
l2tp_session_free() will free it once the grace period closes; a
caller that dereferences the returned session past that point hits
a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU
sleeping lock and the preemption window is real; on stock PREEMPT
kernels local_bh_disable() is a preempt_count increment that closes
the cross-CPU race in practice (see below).
Use refcount_inc_not_zero() and continue the list walk on failure,
matching the other session getters in the file. The ifname getter
is the only session getter in net/l2tp/ that still uses the bare
refcount_inc() pattern; this change restores file-internal
consistency. The success path is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/colorop: Fix blob property reference tracking in state lifecycle
The colorop state blob property handling had memory leaks during state
duplication, destruction, and reset operations. The implementation
failed to follow the established pattern from drm_crtc's handling of
DEGAMMA/GAMMA blob properties.
Issues fixed:
- drm_colorop_atomic_destroy_state() was freeing state memory without
releasing the blob reference, causing a leak
- drm_colorop_reset() was directly freeing old state with kfree()
instead of properly destroying it, leaking blob references
- drm_colorop_cleanup() had duplicate blob cleanup code
Changes:
- Add __drm_atomic_helper_colorop_destroy_state() helper to properly
release blob references before freeing state memory
- Update drm_colorop_atomic_destroy_state() to call the helper
- Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state()
for proper cleanup of old state
- Simplify drm_colorop_cleanup() to use the common destruction path
This matches the well-tested pattern used by drm_crtc since 2016 and
ensures proper reference counting throughout the state lifecycle.
Co-developed by Claude Sonnet 4.5. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix use-after-free in metadata dst teardown
airoha_metadata_dst_free() runs metadata_dst_free() which frees the
metadata_dst with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, an use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix nfs4_file access extra count in nfsd4_add_rdaccess_to_wrdeleg
In nfsd4_add_rdaccess_to_wrdeleg, if fp->fi_fds[O_RDONLY] is already
set by another thread, __nfs4_file_get_access should not be called
to increment the nfs4_file access count since that was already done
by the thread that added READ access to the file. The extra fi_access
count in nfs4_file can prevent the corresponding nfsd_file from being
freed.
When stopping nfs-server service, these extra access counts trigger a
BUG in kmem_cache_destroy() that shows nfsd_file object remaining on
__kmem_cache_shutdown.
This problem can be reproduced by running the Git project's test
suite over NFS. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix memory leak in error path of hci_alloc_dev()
Early failures in Bluetooth HCI UART configuration leak SRCU percpu
memory.
When device initialization fails before hci_register_dev() completes,
the HCI_UNREGISTER flag is never set. As a result, when the device
reference count reaches zero, bt_host_release() evaluates this flag as
false and falls back to a direct kfree(hdev).
Because hci_release_dev() is bypassed, the SRCU struct initialized
early in hci_alloc_dev() is never cleaned up, resulting in a leak of
percpu memory.
Fix the leak by explicitly calling cleanup_srcu_struct() in the
fallback (unregistered) branch of bt_host_release() before freeing
the device. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting
virtio_transport_init_zcopy_skb() uses iter->count as the size argument
for msg_zerocopy_realloc(), which in turn passes it to
mm_account_pinned_pages() for RLIMIT_MEMLOCK accounting. However, this
function is called after virtio_transport_fill_skb() has already consumed
the iterator via __zerocopy_sg_from_iter(), so on the last skb, iter->count
will be 0, skipping the RLIMIT_MEMLOCK enforcement.
Pass pkt_len (the total bytes being sent) as an explicit parameter to
virtio_transport_init_zcopy_skb() instead of reading the already-consumed
iter->count.
This matches TCP and UDP, which both call msg_zerocopy_realloc() with
the original message size. |
| In the Linux kernel, the following vulnerability has been resolved:
fsnotify: fix inode reference leak in fsnotify_recalc_mask()
fsnotify_recalc_mask() fails to handle the return value of
__fsnotify_recalc_mask(), which may return an inode pointer that needs
to be released via fsnotify_drop_object() when the connector's HAS_IREF
flag transitions from set to cleared.
This manifests as a hung task with the following call trace:
INFO: task umount:1234 blocked for more than 120 seconds.
Call Trace:
__schedule
schedule
fsnotify_sb_delete
generic_shutdown_super
kill_anon_super
cleanup_mnt
task_work_run
do_exit
do_group_exit
The race window that triggers the iref leak:
Thread A (adding mark) Thread B (removing mark)
────────────────────── ────────────────────────
fsnotify_add_mark_locked():
fsnotify_add_mark_list():
spin_lock(conn->lock)
add mark_B(evictable) to list
spin_unlock(conn->lock)
return
/* ---- gap: no lock held ---- */
fsnotify_detach_mark(mark_A):
spin_lock(mark_A->lock)
clear ATTACHED flag on mark_A
spin_unlock(mark_A->lock)
fsnotify_put_mark(mark_A)
fsnotify_recalc_mask():
spin_lock(conn->lock)
__fsnotify_recalc_mask():
/* mark_A skipped: ATTACHED cleared */
/* only mark_B(evictable) remains */
want_iref = false
has_iref = true /* not yet cleared */
-> HAS_IREF transitions true -> false
-> returns inode pointer
spin_unlock(conn->lock)
/* BUG: return value discarded!
* iput() and fsnotify_put_sb_watched_objects()
* are never called */
Fix this by deferring the transition true -> false of HAS_IREF flag from
fsnotify_recalc_mask() (Thread A) to fsnotify_put_mark() (thread B). |
| Object lifecycle issue in Metrics in Google Chrome prior to 149.0.7827.155 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-its: Drop the translation cache reference only for the erased entry
vgic_its_invalidate_cache() walks the per-ITS translation cache with
xa_for_each() and drops the cache's reference on each entry with
vgic_put_irq(). It puts the iterated pointer, though, rather than the
value returned by xa_erase().
The function is called from contexts that do not exclude one another: the
ITS command handlers hold its_lock, the GITS_CTLR write path holds
cmd_lock, and the path that clears EnableLPIs in a redistributor's
GICR_CTLR holds neither. Two or more of them can drain the same cache
concurrently, and if each one observes the same entry, erases it and then
puts it, the single reference the cache holds on that entry is dropped
more than once. The entry can then be freed while an ITE still maps it.
xa_erase() is atomic and returns the previous entry, so put only the entry
that this context actually removed. The cache reference is then dropped
exactly once per entry even when the invalidations run concurrently, and
the behavior is unchanged when only one context runs. |
| In the Linux kernel, the following vulnerability has been resolved:
of: unittest: fix use-after-free in of_unittest_changeset()
The variable 'parent' is assigned the value of 'nchangeset' earlier in the
function, meaning both point to the same struct device_node. The call to
of_node_put(nchangeset) can decrement the reference count to zero and
free the node if there are no other holders. After that, the code still
uses 'parent' to check for the presence of a property and to read a
string property, leading to a use-after-free.
Fix this by moving the of_node_put() call after the last access to
'parent', avoiding the UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout
When llbitmap_suspend_timeout() times out waiting for percpu_ref to
become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref.
The caller (md_llbitmap_daemon_fn) then continues to the next page
without calling llbitmap_resume(), leaving the percpu_ref in a killed
state permanently.
Fix this by resurrecting the percpu_ref before returning the error,
ensuring the page control structure remains usable for subsequent
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/P2PDMA: Fix p2pmem_alloc_mmap() warning condition
Commit b7e282378773 has already changed the initial page refcount of
p2pdma page from one to zero, however, in p2pmem_alloc_mmap() it uses
"VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))" to assert the initial page
refcount should not be zero and the following will be reported when
CONFIG_DEBUG_VM is enabled:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x380400000
flags: 0x20000000002000(reserved|node=0|zone=4)
raw: 0020000000002000 ff1100015e3ab440 0000000000000000 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))
------------[ cut here ]------------
WARNING: CPU: 5 PID: 449 at drivers/pci/p2pdma.c:240 p2pmem_alloc_mmap+0x83a/0xa60
Fix by using "page_ref_count(page)" as the assertion condition. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: rate: Unset parent pointer in devl_rate_nodes_destroy
The function devl_rate_nodes_destroy is documented to "Unset parent for
all rate objects". However, it was only calling the driver-specific
`rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing
the parent's refcount, without actually setting the
`devlink_rate->parent` pointer to NULL.
This leaves a dangling pointer in the `devlink_rate` struct, which cause
refcount error in netdevsim[1] and mlx5[2]. In addition, this is
inconsistent with the behavior of `devlink_nl_rate_parent_node_set`,
where the parent pointer is correctly cleared.
This patch fixes the issue by explicitly setting `devlink_rate->parent`
to NULL after notifying the driver, thus fulfilling the function's
documented behavior for all rate objects.
[1]
repro steps:
echo 1 > /sys/bus/netdevsim/new_device
devlink dev eswitch set netdevsim/netdevsim1 mode switchdev
echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs
devlink port function rate add netdevsim/netdevsim1/test_node
devlink port function rate set netdevsim/netdevsim1/128 parent test_node
echo 1 > /sys/bus/netdevsim/del_device
dmesg:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0
CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0x42/0xe0
Call Trace:
<TASK>
devl_rate_leaf_destroy+0x8d/0x90
__nsim_dev_port_del+0x6c/0x70 [netdevsim]
nsim_dev_reload_destroy+0x11c/0x140 [netdevsim]
nsim_drv_remove+0x2b/0xb0 [netdevsim]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xc6/0x130
device_del+0x159/0x3c0
device_unregister+0x1a/0x60
del_device_store+0x111/0x170 [netdevsim]
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x55/0x10f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000
devlink port function rate add pci/0000:08:00.0/group1
devlink port function rate set pci/0000:08:00.0/32768 parent group1
modprobe -r mlx5_ib mlx5_fwctl mlx5_core
dmesg:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0
CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0x42/0xe0
Call Trace:
<TASK>
devl_rate_leaf_destroy+0x8d/0x90
mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core]
mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core]
mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core]
mlx5_sf_esw_event+0xc4/0x120 [mlx5_core]
notifier_call_chain+0x33/0xa0
blocking_notifier_call_chain+0x3b/0x50
mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core]
mlx5_eswitch_disable+0x63/0x90 [mlx5_core]
mlx5_unload+0x1d/0x170 [mlx5_core]
mlx5_uninit_one+0xa2/0x130 [mlx5_core]
remove_one+0x78/0xd0 [mlx5_core]
pci_device_remove+0x39/0xa0
device_release_driver_internal+0x194/0x1f0
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x53/0x1f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
