| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: omapfb: panel-dsi-cm: initialize lock before registering display
dsicm_probe() registers the display before initializing ddata->lock.
Once omapdss_register_display() publishes the display, another consumer
can reach a dsicm callback that takes this mutex while it is still
uninitialized.
Initialize the mutex before registering the display so the published
callbacks always see a valid lock. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Propagate partial completion length across ERP recovery
dasd_default_erp_postaction() copies the timing and device state from
the finished ERP request back to the original request but drops
proc_bytes. A request that was partially completed, an ESE read of a
not-yet-allocated track returns fewer bytes than requested, and then
recovered through the ERP chain loses its partial-completion length.
__dasd_cleanup_cqr() then sees proc_bytes == 0 and completes the whole
request instead of requeueing the remainder, silently returning zeroed
data for the part that was never read.
Carry proc_bytes over to the original request like the other
per-request state. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: FCP: do not copy out an uninitialised init response
fcp_ioctl_init() allocates its response buffer with kmalloc() and copies
the whole buffer back to userspace:
buf_size = init.step0_resp_size + init.step2_resp_size;
void *resp __free(kfree) =
kmalloc(buf_size, GFP_KERNEL);
...
if (copy_to_user(arg->resp, resp, buf_size))
return -EFAULT;
Nothing clears the buffer, and the only writer of its leading
step0_resp_size bytes is the step-0 control transfer:
err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
FCP_USB_REQ_STEP0,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
0, private->bInterfaceNumber,
step0_resp, private->step0_resp_size);
if (err < 0)
return err;
usb_fill_control_urb() does not set URB_SHORT_NOT_OK, so a short or
zero-length data stage completes with status 0 and snd_usb_ctl_msg()
returns a small actual_length. The only check is err < 0, so a short
transfer is accepted as success.
snd_usb_ctl_msg() copies the full size back unconditionally:
buf = kmemdup(data, size, GFP_KERNEL);
...
memcpy(data, buf, size);
Bytes the device never wrote are therefore restored into resp unchanged
and copied to userspace. step0_resp_size and step2_resp_size are each
validated only to 1..255, so the caller also picks the slab cache, from
kmalloc-8 up to kmalloc-512.
On 7.2.0-rc5 (arm64), device answering step 0 with a zero-length data
stage, s0 = s2 = 255:
# init_on_alloc off, no spray
step0 window [0,255): nonzero=94/255
000: 00 80 60 06 00 00 ff ff 18 00 00 00 57 01 ea 01
010: 08 78 22 13 00 00 ff ff a8 c4 5f 80 00 80 ff ff
# same kernel, kmalloc-512 pre-seeded with an 8-byte tag
step0 window [0,255): nonzero=219/255 tagbytes=232
# identical run, init_on_alloc=1
step0 window [0,255): nonzero=0/255 tagbytes=0
# all three runs
step2 window [255,510): device words matched=62/62
a8 c4 5f 80 00 80 ff ff is the little-endian kernel text address
ffff8000805fc4a8. The step-2 window is unaffected, so the disclosure is
exactly the step-0 region.
Zero the buffer, and require the step-0 transfer to deliver the full
step0_resp_size bytes so a short data stage is reported as an error.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| An information leakage vulnerability exists in the Endpoint DLP component (epdlpdrv.sys) of Netskope Client for Windows prior to version R141. An internal communication channel used by the user-space hook DLL to pass messages through the kernel driver to the daemon lacked proper token-based message validation, allowing local unprivileged processes to send unauthorized queries. Additionally, a reply buffer used by the port message handler was not properly initialized before returning data, leaking residual kernel pool memory from prior allocations. A local unprivileged attacker could exploit this vulnerability to enumerate DLP configuration and feature flags, extract live session tokens, and read kernel memory fragments from other users' operations. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: ensure nfsd_file_do_acquire() does not use a non-opened file
->atomic_open is permitted to return success without actually opening
the file. It indicates this by calling finish_no_open().
This means dentry_create() can return a file which hasn't been opened.
This is extremely unlikely as ->atomic_open handlers typically
use finish_no_open() only for already existing files, and dentry_create()
isn't called in that case, and the parent being locked should prevent
races.
However out of an abundance of caution it seems wise to teach nfsd to
only use the file returned by dentry_create() if FMODE_OPENED is set,
indicating that it has in fact been opened. |
| Use of uninitialized resource in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip Update HDCP Config In Transition State
Transition state does not have a valid dm_stream_ctx that should skip
configuring HDCP routine. The routine is valid to go through only when
a valid stream is created. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: propagate register read errors
max17040_get_vcell() and max17040_get_soc() ignore errors returned by
regmap_read(). When an I2C transfer fails, the uninitialized register
value is converted and reported to userspace as a valid voltage or state
of charge. The polling worker can also replace the cached state of charge
with the bogus value and emit a spurious change event.
Propagate read errors through the power supply get_property callback and
keep the last valid cached state of charge when polling fails. |
| Use of uninitialized resource in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Uninitialized resource in Codecs in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Use of uninitialized resource in Microsoft Office allows an unauthorized attacker to disclose information over a network. |
| Use of uninitialized resource in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| Uninitialized resource in Media in Google Chrome prior to 153.0.8010.36 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Uninitialized resource in WebGL in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Initialize epfile->in early to fix endpoint direction checks
When parsing endpoint descriptors, ffs_data_got_descs() generates the
eps_addrmap which contains the endpoint direction. However, epfile->in
was previously only populated in ffs_func_eps_enable() which executes
upon USB host connection. As a result, early userspace ioctls like
FUNCTIONFS_DMABUF_ATTACH that run before the host connects would see
epfile->in as 0, leading to incorrect DMA directions.
By moving the initialization to ffs_epfiles_create(), epfile->in is
accurate before userspace opens the endpoint files. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix register corruption from uninitialized cregs on error
compat_riscv_gpr_set() calls cregs_to_regs() unconditionally, even when
user_regset_copyin() fails. Since cregs is an uninitialized stack
variable, a copyin failure causes uninitialized stack data to be written
into the target task's pt_regs, corrupting its register state and
potentially leaking kernel stack contents.
compat_restore_sigcontext() has the same issue: it calls cregs_to_regs()
even when __copy_from_user() fails, leading to the same corruption of
the signal-returning task's register state on error.
Only call cregs_to_regs() when the user copy succeeds. |
| Uninitialized resource in V8 in Google Chrome prior to 152.0.7977.75 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| FreeRDP versions 3.0.0 through 3.30.0 (before 3.31.0) transmit uninitialized heap memory in Save Session Info PDU reserved padding fields. Three PDU writers in libfreerdp/core/info.c (rdp_write_logon_info_v2, rdp_write_logon_info_plain, and rdp_write_logon_info_ex) use Stream_Seek instead of Stream_Zero for reserved pad bytes (up to 576 bytes), leaving previously freed heap contents in the outgoing PDU. Because the send buffer is allocated with malloc (not zeroed), stale heap data — which may include cleartext credentials from prior sessions — can be sent to the receiving peer. FreeRDP-based servers using rdpUpdate::SaveSessionInfo and freerdp-proxy (which forwards these PDUs) are affected, allowing disclosure of server/proxy process memory to a downstream client. |
| A flaw was found in the SFTP backend in gvfs. When mounting a share, a malicious SFTP server can cause read_string() to allocate a buffer with a certain length but the function does not verify that the buffer is completely filled, leaving the remainder of the buffer containing uninitialized heap contents. If the server sends a short FXP_HANDLE reply, these uninitialized bytes are taken as the file handle. The client will then echo these uninitialized bytes back to the server on all subsequent requests using that handle. With a length of 128 bytes, this issue allows the malicious server to deterministically read uninitialized heap memory from the gvfsd-sftp process, leaking its heap base and the load address of the libgio library, resulting in a deterministic defeat of Address Space Layout Randomization (ASLR). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - only expose sysfs attributes on control interface
When the driver was converted to use the driver core to instantiate device
attributes (via .dev_groups in the usb_driver structure), the attributes
started appearing on all interfaces bound to the driver. Since the ims-pcu
driver manually claims the secondary data interface during probe, the
driver core automatically creates the sysfs attributes for that interface
as well.
However, the driver only supports these attributes on the primary control
interface. Data interfaces lack the necessary descriptors and internal
state to handle these requests, and accessing them can lead to unexpected
behavior or crashes.
Fix this by updating the is_visible() callbacks for both the main and OFN
attribute groups to verify that the interface being accessed is indeed the
control interface. |
