| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper verification of cryptographic signature during installation of a Printer driver via the TeamViewer_service.exe component of TeamViewer Remote Clients prior version 15.58.4 for Windows allows an attacker with local unprivileged access on a Windows system to elevate their privileges and install drivers. |
| Apache::AuthAny::Cookie v0.201 or earlier for Perl generates session ids insecurely.
Session ids are generated using an MD5 hash of the epoch time and a call to the built-in rand function. The epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage.
Predicable session ids could allow an attacker to gain access to systems. |
| Node-SAML is a SAML library not dependent on any frameworks that runs in Node. In versions 5.0.1 and below, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. This issue is fixed in version 5.1.0. |
| Constellation is the first Confidential Kubernetes. The Constellation CVM image uses LUKS2-encrypted volumes for persistent storage. When opening an encrypted storage device, the CVM uses the libcryptsetup function crypt_activate_by_passhrase. If the VM is successful in opening the partition with the disk encryption key, it treats the volume as confidential. However, due to the unsafe handling of null keyslot algorithms in the cryptsetup 2.8.1, it is possible that the opened volume is not encrypted at all. Cryptsetup prior to version 2.8.1 does not report an error when processing LUKS2-formatted disks that use the cipher_null-ecb algorithm in the keyslot encryption field. This vulnerability is fixed in 2.24.0. |
| IPP software versions prior to v1.71 do not sufficiently verify the authenticity of data, in a
way that causes it to accept invalid data. |
| dnsjava is an implementation of DNS in Java. Records in DNS replies are not checked for their relevance to the query, allowing an attacker to respond with RRs from different zones. This vulnerability is fixed in 3.6.0. |
| ABB is aware of privately reported vulnerabilities in the product versions referenced in this CVE. An attacker could exploit these vulnerabilities by sending a specially crafted firmware or configuration to the system node, causing the node to stop, become inaccessible, or allowing the attacker to take control of the node. |
| MinIO is a High Performance Object Storage released under GNU Affero General Public License v3.0. The signature component of the authorization may be invalid, which would mean that as a client you can use any arbitrary secret to upload objects given the user already has prior WRITE permissions on the bucket. Prior knowledge of access-key, and bucket name this user might have access
to - and an access-key with a WRITE permissions is necessary. However with relevant information in place, uploading random objects to buckets is trivial and easy via curl. This issue is fixed in RELEASE.2025-04-03T14-56-28Z. |
| In specific circumstances, due to a weakness in the Pseudo Random Number Generator (PRNG) that is used, it is possible for an attacker to predict the source port and query ID that BIND will use.
This issue affects BIND 9 versions 9.16.0 through 9.16.50, 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.16.8-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1. |
| Under certain circumstances, BIND is too lenient when accepting records from answers, allowing an attacker to inject forged data into the cache.
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1. |
| The YoSmart YoLink API through 2025-10-02 uses an endpoint URL that is derived from a device's MAC address along with an MD5 hash of non-secret information, such as a key that begins with cf50. |
| xml-crypto is an xml digital signature and encryption library for Node.js. In affected versions the default configuration does not check authorization of the signer, it only checks the validity of the signature per section 3.2.2 of the w3 xmldsig-core-20080610 spec. As such, without additional validation steps, the default configuration allows a malicious actor to re-sign an XML document, place the certificate in a `<KeyInfo />` element, and pass `xml-crypto` default validation checks. As a result `xml-crypto` trusts by default any certificate provided via digitally signed XML document's `<KeyInfo />`. `xml-crypto` prefers to use any certificate provided via digitally signed XML document's `<KeyInfo />` even if library was configured to use specific certificate (`publicCert`) for signature verification purposes. An attacker can spoof signature verification by modifying XML document and replacing existing signature with signature generated with malicious private key (created by attacker) and by attaching that private key's certificate to `<KeyInfo />` element. This vulnerability is combination of changes introduced to `4.0.0` on pull request 301 / commit `c2b83f98` and has been addressed in version 6.0.0 with pull request 445 / commit `21201723d`. Users are advised to upgrade. Users unable to upgrade may either check the certificate extracted via `getCertFromKeyInfo` against trusted certificates before accepting the results of the validation or set `xml-crypto's getCertFromKeyInfo` to `() => undefined` forcing `xml-crypto` to use an explicitly configured `publicCert` or `privateKey` for signature verification. |
| The optional feature 'Anti-Virus & Sandbox' of i-FILTER contains an issue with improper pattern file validation. If exploited, the product may treat an unauthorized pattern file as an authorized. If the product uses a specially crafted pattern file, information in the server where the product is running may be retrieved, and/or cause a denial of service (DoS) condition. |
| Improper Verification of Source of a Communication Channel in Work Desktop for Mac versions 10.8.1.46 and earlier
allows attackers to execute arbitrary commands via unauthorized access to the Agent service.
This has been remediated in Work Desktop for Mac version 10.8.2.33. |
| An insufficiently secured internal function allows session generation for arbitrary users. The decodeParam function checks the JWT but does not verify which signing algorithm was used. As a result, an attacker can use the "ex:action" parameter in the VerifyUserByThrustedService function to generate a session for any user. |
| Improper verification of cryptographic signature during installation of a VPN driver via the TeamViewer_service.exe component of TeamViewer Remote Clients prior version 15.58.4 for Windows allows an attacker with local unprivileged access on a Windows system to elevate their privileges and install drivers. |
| Ceph is a distributed object, block, and file storage platform. In versions 19.2.3 and below, it is possible to send an JWT that has "none" as JWT alg. And by doing so the JWT signature is not checked. The vulnerability is most likely in the RadosGW OIDC provider. As of time of publication, a known patched version has yet to be published. |
| The Authorize.net Payment Gateway For WooCommerce plugin for WordPress is vulnerable to payment bypass in all versions up to, and including, 8.0. This is due to the plugin not properly verifying the authenticity of the request that updates a orders payment status. This makes it possible for unauthenticated attackers to update order payment statuses to paid bypassing any payment. |
| A code execution vulnerability exists in the Xiaomi shop applicationproduct. The vulnerability is caused by improper input validation and can be exploited by attackers to execute malicious code. |
| RISC Zero is a general computing platform based on zk-STARKs and the RISC-V microarchitecture. Due to a missing constraint in the rv32im circuit, any 3-register RISC-V instruction (including remu and divu) in risc0-zkvm 2.0.0, 2.0.1, and 2.0.2 are vulnerable to an attack by a malicious prover. The main idea for the attack is to confuse the RISC-V virtual machine into treating the value of the rs1 register as the same as the rs2 register due to a lack of constraints in the rv32im circuit. Rust applications using the risc0-zkvm crate at versions 2.0.0, 2.0.1, and 2.0.2 should upgrade to version 2.1.0. Smart contract applications using the official RISC Zero Verifier Router do not need to take any action: zkVM version 2.1 is active on all official routers, and version 2.0 has been disabled. Smart contract applications not using the verifier router should update their contracts to send verification calls to the 2.1 version of the verifier. |
