Export limit exceeded: 417223 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54161 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99085 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler A CPU going down has to empty its own rq. Its hotplug thread waits in sched_cpu_wait_empty() until nothing else is left, and the only thing that wakes it is balance_push(), which runs from __schedule() on the dying CPU and pushes off the migratable tasks the CPU picks. sched_ext breaks this. A task sitting on a user DSQ or held by the BPF scheduler is still counted on its rq, but an inactive CPU no longer calls ops.dispatch() and can't pull the task back. The dying CPU goes idle with the task still counted, and one of two things happens: - Another CPU consumes the task. The rq empties without a __schedule() on the dying CPU, so the hotplug thread is never woken and cpu_down() hangs holding cpu_hotplug_lock. - The task is affine only to the dying CPU. Nothing can move it, and the offline stalls until the watchdog ejects the BPF scheduler. When the rq goes offline, re-enqueue every task on it that isn't already on the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the dying CPU itself picks the tasks and balance_push() pushes them off, the same as for the other sched classes. From then on no sched_ext path on another CPU can pull a task off the rq. ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU hotplug then waits for an RCU grace period before taking the rq offline. A BPF-held task affine only to the dying CPU and preempted inside an RCU read-side critical section would block that grace period, and the rq would never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps running until the rq goes offline. Only the dying CPU's own hotplug thread clears the flag during teardown, and task_can_run_on_remote_rq() still keeps other rqs' tasks off the CPU. | ||||
| CVE-2026-79886 | 1 Hpe | 1 Aos | 2026-10-24 | 8.2 High |
| An unauthenticated buffer overflow vulnerability exists in the PAPI protocol of AOS-8. Successful exploitation could allow an unauthenticated remote attacker to disrupt the availability of the affected service on the controller, with a limited impact to its integrity. | ||||
| CVE-2026-115845 | 1 Aws | 2 Aws-mcp-server, Aws Mcp Server | 2026-10-23 | 6.4 Medium |
| An incomplete list of disallowed inputs in the Python code validator of the run_script tool in AWS MCP Server might allow an authenticated remote user to execute arbitrary code within their own isolated session environment via a crafted script. AWS fixed this issue service-side. No customer action is required. | ||||
| CVE-2026-19741 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | 7.5 High |
| Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning. The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings erase) can run any stock Thread commissioner registered with J01NME, complete the handshake, and hand the device an attacker-controlled operational dataset. The device then joins and enables Thread on the attacker's mesh. The attacker becomes its router, seeing, dropping, injecting and spoofing all of the device's IPv6 traffic and impersonating the peers the application expects, while the device is cut off from the network it was meant to join and stays mis-provisioned until it is reset. Only application-layer security with independently provisioned credentials survives. Exposure is limited to builds that enable joiner autostart and leave the PSKd unset; the option is not enabled by default and no in-tree sample uses the vulnerable combination. The fix removes the default from CONFIG_OPENTHREAD_JOINER_PSKD and adds a BUILD_ASSERT() in modules/openthread/openthread.c, active only under CONFIG_OPENTHREAD_JOINER_AUTOSTART, that fails the build unless a 6-to-32-character PSKd is configured. Products should provision a per-device PSKd from factory data and call otJoinerStart() from the application rather than relying on a credential compiled identically into every unit. | ||||
| CVE-2026-53920 | 1 Openwrt | 1 Odhcpd | 2026-10-23 | N/A |
| odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. From version 17.01.0 to before version 25.12.3, odhcpd's DHCPv6 IA parser accepts an IA_NA or IA_PD option whose body is shorter than struct dhcpv6_ia_hdr, casts the option header to that full structure, and reads ia->iaid before proving that the IA body contains the IAID field. If an unauthenticated network-adjacent client places a zero-length or otherwise short IA option at the end of odhcpd's 8192-byte receive stack buffer, the IAID read crosses from data_buf into adjacent stack memory. The disclosed bytes are then reflected in the DHCPv6 reply IAID; prior ARM validation showed data_buf[8192:8196] disclosing the saved stack canary, and wider stack scans can leak ASLR-useful stack/process contents. This issue has been patched in version 25.12.3. | ||||
| CVE-2026-9869 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| A stack-based buffer overflow vulnerability exists in the boa formTR069Config functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2026-9817 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| A stack-based buffer overflow vulnerability exists in the boa formUploadFile functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2026-9660 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| Multiple exploitable stack-based buffer overflow vulnerabilities exist in the boa formFilter functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability deals with the vpnPassword parameter. | ||||
| CVE-2026-42026 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| Multiple exploitable stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup dhcp_dns functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the dhcp_dns2 parameter. | ||||
| CVE-2026-42024 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup static network configuration functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the static_gw parameter. | ||||
| CVE-2026-42023 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup static network configuration functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the static_ipv6 parameter. | ||||
| CVE-2026-42022 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup static network configuration functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the static_dns2 parameter. | ||||
| CVE-2026-42021 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup static network configuration functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the static_dns1 parameter. | ||||
| CVE-2026-10139 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| A stack-based buffer overflow vulnerability exists in the Mcli functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2026-10137 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| A stack-based buffer overflow vulnerability exists in the boa formUpload() functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2026-10136 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| A heap-based buffer overflow vulnerability exists in the boa formUpload() functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2026-10133 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| A stack-based buffer overflow vulnerability exists in the batchupg functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2026-10132 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| A stack-based buffer overflow vulnerability exists in the boa formIpQos mac functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2026-114622 | 1 Baserproject | 1 Basercms | 2026-10-23 | 7.2 High |
| baserCMS is a website development framework. In versions 5.2.3 before 5.3.2 and 5.4.0 before 5.4.2, the optional BcThemeFile plugin's Admin API validates a raw path in ThemeFilesService::update() and getFullpath(), but ThemeFileForm::_execute() subsequently applies rawurldecode() to fullpath before writing. Because normalizePath() resolves only literal dot segments, percent-encoded traversal can pass the containment checks and become a path outside the theme directory at the write sink. An authenticated administrator can write PHP files into writable locations such as webroot and execute them, exceeding the intended theme-template editing boundary. The source also identifies the same check-before-decode ordering in ThemeFilesService::copy(), although that path was not dynamically verified. Exploitation requires the non-default plugin, an administrator session, and a same-origin Origin header; USE_CORE_ADMIN_API=false does not block session-authenticated requests. The Admin web form is not affected by this encoded-path tampering because FormProtection protects fullpath. This is a third bypass of the protections associated with CVE-2026-30940, using encoded traversal decoded after validation. This issue has been patched in versions 5.3.2 and 5.4.2. | ||||
| CVE-2026-55457 | 1 Intranda | 1 Goobi Viewer Core | 2026-10-23 | 7.4 High |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, Configuration.getWebApiToken returns the empty string when webapi.authorization.token is not configured. AuthorizationFilter compares the supplied token against this default without first checking that the configured token is non-empty. A request to any @AuthorizationBinding-protected endpoint with an empty ?token= value is therefore accepted. This issue has been patched in version 26.05. | ||||