| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When implementing the JavaScript interface, Foxit PDF Editor/Reader did not perform the attribute authorization checks required by the specification. As a result, a trusted malicious PDF could potentially access sensitive content from other documents within the same process and transmit it externally. |
| Dark Reader is an accessibility browser extension that makes web pages colors dark. Prior to 4.9.126, a website can cause the browser extension's image inversion pipeline to request an unauthenticated icon-like bitmap from a locally running web server when the resource uses a known public-like HTTPS URL and is detected as requiring inversion. This behavior can cross the website-to-local-network boundary and disclose limited information associated with the requested resource. The darkreader npm package used for website integration is not affected. This issue is fixed in version 4.9.126 for Firefox and version 4.9.128 for other browsers. |
| The Z80Ultra (NX741J) product contains a vulnerability where non-privileged programs can retrieve the Wi-Fi MAC address by querying the read-only field factory_mac_address in the Settings.Secure database. |
| In multiple locations, there is a possible use-after-free due to improper locking. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, s390: Clear fetch destination on faulting arena atomic
Same missing register clear as on riscv64. A RMW atomic on an arena pointer
is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but
bpf_jit_probe_atomic_pre() only fills in the arena base and the probe
offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which
bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads
back as "there is nothing to clear".
That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory,
but an RMW carrying BPF_FETCH also reads the old value into a register:
src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and r0 for
BPF_CMPXCHG. So on a fault over an unmapped arena page the program resumes
at the landing pad with whatever that register held before the atomic
instead of the 0 that every other BPF_PROBE_* access delivers.
Fill probe->reg in from bpf_atomic_load_reg(). Unlike x86-64 and arm64,
s390x does not report arena violations from its exception handler, so there
is no access direction to correct here, only the missing register clear. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Drop tt->restore after successful restore
ttm_pool_restore_and_alloc() can successfully complete the restore
process via ttm_pool_restore_commit(), but tt->restore is not dropped
afterward. As a result, subsequent backup/restore flows observe what
appears to be a completed restore, while in reality shmem handles are
still installed in tt->pages, leading to the stack trace below.
Fix this by freeing and dropping tt->restore in
ttm_pool_restore_and_alloc() upon successful completion of the restore.
20545 [ 309.784531] RIP: 0010:sg_alloc_append_table_from_pages+0x38c/0x490
20547 [ 309.809570] RSP: 0018:ffffc9000623b838 EFLAGS: 00010206
20548 [ 309.814827] RAX: 0000000000001000 RBX: ffff88816e42a160 RCX: 0000000000000000
20549 [ 309.821986] RDX: 0000000000002000 RSI: 0000000000000003 RDI: 0000000000001000
20550 [ 309.829147] RBP: ffff88816e42a168 R08: 0000000000000002 R09: 000000007ffff000
20551 [ 309.836310] R10: ffffc9000623b928 R11: 0000000000000000 R12: 000000007ffff000
20552 [ 309.843471] R13: ffff88815ba5a100 R14: 0000000000000000 R15: 0000000000000001
20553 [ 309.850634] FS: 00007f9ff305e700(0000) GS:ffff888276c94000(0000) knlGS:0000000000000000
20554 [ 309.858749] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
20555 [ 309.864519] CR2: 00007f9fca701000 CR3: 00000001565e2005 CR4: 0000000008f70ef0
20556 [ 309.871678] PKRU: 55555558
20557 [ 309.874403] Call Trace:
20558 [ 309.876866] <TASK>
20559 [ 309.878988] sg_alloc_table_from_pages_segment+0x60/0x100
20560 [ 309.884415] ? ttm_resource_manager_usage+0x36/0x60 [ttm]
20561 [ 309.889845] ? xe_tt_map_sg+0x7d/0xd0 [xe]
20562 [ 309.894045] xe_tt_map_sg+0x7d/0xd0 [xe]
20563 [ 309.898037] xe_bo_move+0x927/0xaa0 [xe]
20564 [ 309.902029] ttm_bo_handle_move_mem+0xba/0x170 [ttm]
20565 [ 309.907022] ttm_bo_validate+0xbe/0x190 [ttm]
20566 [ 309.911405] xe_bo_validate+0x9a/0x120 [xe]
20567 [ 309.915663] xe_gpuvm_validate+0xd9/0x140 [xe]
20568 [ 309.920206] drm_gpuvm_validate+0x2f0/0x5b0 [drm_gpuvm]
20569 [ 309.925459] ? drm_exec_lock_obj+0x63/0x210 [drm_exec]
20570 [ 309.930627] xe_vm_validate_rebind+0x46/0xb0 [xe]
20571 [ 309.935428] xe_exec_fn+0x20/0x40 [xe]
20572 [ 309.939249] drm_gpuvm_exec_lock+0x78/0xc0 [drm_gpuvm]
20573 [ 309.944410] xe_validation_exec_lock+0x5a/0xa0 [xe]
20574 [ 309.949385] xe_exec_ioctl+0x806/0xc30 [xe]
20575 [ 309.953639] ? ttwu_queue_wakelist+0xd9/0xf0
20576 [ 309.957935] ? __pfx_xe_exec_fn+0x10/0x10 [xe]
20577 [ 309.962449] ? __wake_up_common+0x73/0xa0
20578 [ 309.966482] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20579 [ 309.971263] drm_ioctl_kernel+0xa3/0x100
20580 [ 309.975209] drm_ioctl+0x213/0x440
20581 [ 309.978637] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20582 [ 309.983415] xe_drm_ioctl+0x67/0xd0 [xe]
20583 [ 309.987408] __x64_sys_ioctl+0x7f/0xd0 |
| In the Linux kernel, the following vulnerability has been resolved:
net: fec: only stop PTP if it was initialized
fec_ptp_init() is only called when fep->bufdesc_ex is available.
However, fec_probe() unconditionally calls fec_ptp_stop() on the
failed_init path, and fec_drv_remove() unconditionally calls
fec_ptp_stop() during device removal.
Check fep->bufdesc_ex before calling fec_ptp_stop() in both paths
to avoid stopping PTP when it was not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: atm: usbatm: fix invalid ci_range initialization
syzbot reported a shift-out-of-bounds in __vcc_connect():
UBSAN: shift-out-of-bounds in net/atm/common.c:382:32
shift exponent -1 is negative
CPU: 0 UID: 0 PID: 5987 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/05/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
__vcc_connect+0x14b4/0x19c0 net/atm/common.c:382
vcc_connect+0x328/0x8f0 net/atm/common.c:498
pvc_bind+0x272/0x380 net/atm/pvc.c:52
__sys_bind+0x2e3/0x410 net/socket.c:1976
__x64_sys_bind+0x7a/0x90 net/socket.c:1979
...
ATM device ci_range fields (vpi_bits and vci_bits) represent the
number of bits supported for VPI and VCI addressing on the device.
net/atm/common.c directly uses these fields as bit shift counts:
vpi >> dev->ci_range.vpi_bits
vci >> dev->ci_range.vci_bits
1 << vcc->dev->ci_range.vpi_bits
1 << vcc->dev->ci_range.vci_bits
usbatm_atm_init() sets ci_range.vpi_bits and ci_range.vci_bits to
ATM_CI_MAX (-1), which is defined in <uapi/linux/atmdev.h> as a
sentinel value for userspace ATM_SETCIRANGE requests, not a valid bit
count. Shifting by -1 is undefined behavior and triggers UBSAN
warnings.
ATM UNI cell headers allow up to 8 bits for VPI (0..255) and 16 bits
for VCI (0..65535). Initialize vpi_bits to 8 and vci_bits to 16, as
done by solos-pci. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: move hardware offload step after building the chain blob
Allocate the chain blob before the ruleset offload to reduce chances of
entering an inconsistent state where the offloaded ruleset in the nic
and the software ruleset differ. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: st33zp24: Return zero on status read failure
st33zp24_status() ignores the result of the transport read and returns
data even when no byte was received. The I2C transport, for example,
skips i2c_master_recv() when the register-select write is short or fails,
leaving data uninitialized. The resulting stack value can be interpreted
as TPM_STS flags and let status checks complete spuriously.
The status callback cannot propagate a transport error. Return zero
unless recv() reports exactly one byte. With no status bits set, callers
retry or take their existing timeout or error path instead of acting on
an invalid status value.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_htb: limit htb_classify inner-class filter hops
htb_classify() follows each filter-selected inner class by switching
to cl->filter_list, but never bounds the number of hops. A filter on
an inner class can point back to itself or to another inner class that
points back, creating an infinite loop in the packet classification
path with the qdisc lock held and BH disabled — a soft lockup / panic
from a single packet.
Bound the traversal with a hop counter and drop the packet with a
rate-limited warning once the bound is exceeded. The counter is
incremented at the point the inner filter chain is picked up, after the
TC_ACT_* switch has consumed the classifier verdict, so a terminal
TC_ACT_QUEUED/STOLEN/TRAP on the last permitted chain still sets *qerr
to __NET_XMIT_STOLEN and the packet is not charged as a drop by this
qdisc or its parent.
The bound is TC_HTB_MAXDEPTH, taken from HTB's own parameters rather than
from the qdisc hierarchy depth limit. Class levels run from 0 to
TC_HTB_MAXDEPTH - 1, so a traversal that strictly descends in level can
take at most TC_HTB_MAXDEPTH hops. That descent is what a sane
configuration does, but it is assumed here rather than enforced:
htb_find() resolves a classid against every class in the qdisc, so a
filter may equally select a sibling or an ancestor. The normal
root -> inner -> leaf path takes a single hop, so the bound does not
affect legitimate classification.
htb_classify() can now return NULL irrespective of CONFIG_NET_CLS_ACT,
whereas previously every NULL return sat inside that ifdef. The NULL
handler in htb_enqueue() therefore cannot stay conditional either, so
drop the ifdef around it. This matches hfsc_enqueue(), which has always
handled a NULL class unconditionally. Without it, a kernel built
without actions would dereference a NULL class instead of dropping.
Conditions to recreate the bug:
- CONFIG_NET_SCHED, CONFIG_NET_SCH_HTB, CONFIG_NET_CLS_U32,
CONFIG_LOCKUP_DETECTOR.
- Create an HTB qdisc on a device (e.g. lo), add an inner class
1:1 with a leaf child 1:10, install a root u32 filter selecting
1:1, and an inner-class u32 filter on 1:1 also selecting 1:1.
- Send one packet (ping). On the unfixed kernel the classify loop
spins with the qdisc lock held; with softlockup_panic=1 it panics.
- Reachable from unprivileged user via unshare -Urn (CAP_NET_ADMIN). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Replace ly instruction with llgf
cpu_nr is a 32 bit value and BPF_REG_0 is a 64 bit register, when ly loads
the cpu_nr into BPF_REG_0 it does not zero the upper bits, but llgf does. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: visconti: Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
visconti_clk_register_gate() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio: rtc: time out alarm requests
RTC class operations run with rtc_device.ops_lock held. The virtio RTC
alarm requests currently wait without a timeout for the device to return
their requestq buffers.
On surprise removal, virtio-pci marks the virtqueues broken before
unregistering the virtio device. If an alarm request is waiting when the
device stops responding, viortc_remove() blocks in viortc_class_stop()
while trying to acquire ops_lock. The request cannot complete and device
removal hangs until the waiting task is signalled.
Use the same 60-second timeout as clock read requests for alarm reads,
alarm programming, and alarm interrupt enable requests. The existing
message reference counting keeps a timed-out request alive until a late
response or device teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: use DEFINE_MUTEX for the file-scope mutex
In null_init(), mutex_init(&lock) currently happens after
configfs_register_subsystem(), which exposes the nullb subsystem to
userspace. A racing mkdir() into /sys/kernel/config/nullb/ can reach
null_find_dev_by_name() -> mutex_lock(&lock) before the mutex is
initialized, trigger warning:
[ 123.137788] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 123.137796] WARNING: kernel/locking/mutex.c:159 at mutex_lock+0x171/0x1c0, CPU#13: mkdir/1301
[ 123.140090] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4
......
[ 123.154926] Call Trace:
[ 123.155172] <TASK>
[ 123.155419] ? __pfx_mutex_lock+0x10/0x10
[ 123.156181] ? __pfx__raw_spin_lock+0x10/0x10
[ 123.156571] nullb_group_make_group+0x20/0x100 [null_blk]
[ 123.157011] configfs_mkdir+0x47b/0xc70
[ 123.157337] ? __pfx_configfs_mkdir+0x10/0x10
[ 123.157719] ? may_create_dentry+0x242/0x2e0
[ 123.158061] vfs_mkdir+0x2a9/0x6c0
[ 123.158352] filename_mkdirat+0x3dc/0x500
[ 123.158710] ? __pfx_filename_mkdirat+0x10/0x10
[ 123.159070] ? strncpy_from_user+0x3a/0x1d0
[ 123.159413] __x64_sys_mkdir+0x6b/0x90
[ 123.159760] do_syscall_64+0xea/0x600
Replace the runtime mutex_init(&lock) with a static DEFINE_MUTEX(lock)
declaration to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: nfcon: Do not call console_is_registered() in nfcon_device()
Since 7c2af0f634f1 ("tty: tty_io: use console_list_lock for list
synchronization") show_cons_active() calls the .device() method under
the console_list_lock, but console_is_registered() tries to acquire
console_list_lock as well, causing a deadlock. It should not be
necessary to check console_is_registered() here since the function
should not be called in the fist place when the console is not
registered. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: scan: fix bus ID cleanup on device_add() failures
When device_add() fails after acpi_device_set_name() has allocated an
instance ID and a new acpi_device_bus_id has been linked into
acpi_bus_id_list, the rollback path only removes wakeup_list and
detaches the ACPI handle data.
That leaves the bus-ID bookkeeping behind and keeps the allocated
instance number consumed.
Move the bus-ID cleanup and wakeup-list removal into a single helper.
Use it from both the normal device teardown path and the device_add()
rollback path. The wakeup list node is initialized before registration,
so it can be deleted without checking whether the device is wakeup-
capable like in the original teardown path.
[ rjw: Rename acpi_device_del_list() to acpi_device_cleanup() ]
[ rjw: Subject and changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
isp4sd_pwron_and_init() holds ops_mutex via guard(mutex) and, on any
init failure, jumps to err_deinit and calls isp4sd_pwroff_and_deinit().
That helper takes the same ops_mutex, re-acquiring a non-recursive mutex
already held by the current thread, so any init failure deadlocks.
Unwind the error path in stages instead, releasing only what each
failure point acquired. This also avoids the issues that an
unconditional teardown would hit at the earlier failures, such as a
runtime-PM underflow from pm_runtime_resume_and_get() and MMIO access
while the device is unpowered. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: ep: Flush cached MSI write before unmapping the iATU
The MSI-X path already flushes any posted MSI-X write before tearing down
its iATU mapping. That was added by commit c22533c66cca ("PCI: dwc: ep:
Flush MSI-X write before unmapping its ATU entry") to make sure the write
reaches the Root Complex before the outbound window that translates it
disappears.
The MSI path has the same problem but no equivalent flush. When the
Endpoint driver caches an MSI target address and later observes that the
Root Complex has changed it, dw_pcie_ep_raise_msi_irq() unmaps the existing
iATU entry and reprograms it for the new address. Between the last MSI
writel() and the unmap there may still be a posted write sitting in the
fabric, and unmapping the iATU entry can drop or misroute that write.
Fix this by reading back from the mapped MSI window before the unmap. The
readback drains any posted MSI writes through the same iATU entry that
mapped them, which is the same logic the MSI-X path uses.
[mani: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: Use PFP on the compute queues too
On GFX6, the compute rings use the same CP path as
the graphics ring. The only difference is that they
don't support draw commands. (As opposed to GFX7 and
newer which have a separate command parser that is
called MEC for compute queues.)
This means that we have to take into consideration
that the PFP also exists on compute queues on GFX6:
Use PFP for register writes on both graphics and
compute queues.
In the pipeline sync, use the PFP to wait for the
previous fence (and not the ME) to prevent the PFP
from starting to execute the next submission while
the ME is still in the previous submission.
After a VM flush, emit PFP_SYNC_ME on compute
queues as well. |
