| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
pseries/papr-hvpipe: Fix race with interrupt handler
While executing ->ioctl handler or ->release handler, if an interrupt
fires on the same cpu, then we can enter into a deadlock.
This patch fixes both these handlers to take spin_lock_irq{save|restore}
versions of the lock to prevent this deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix adapter registration race
Adapters can be looked up based on their id using i2c_get_adapter()
which takes a reference to the embedded struct device.
Make sure that the adapter (including its struct device) has been
initialised before adding it to the IDR to avoid accessing uninitialised
data which could, for example, lead to NULL-pointer dereferences or
use-after-free.
Note that the i2c-dev chardev, which is registered from a bus notifier,
currently uses i2c_get_adapter() so the adapter needs to be added to the
IDR before registration. |
| In the Linux kernel, the following vulnerability has been resolved:
signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
When a multi-threaded process receives a stop signal (e.g., SIGSTOP),
do_signal_stop() sets JOBCTL_STOP_PENDING and JOBCTL_STOP_CONSUME on all
threads and sets signal->group_stop_count to the number of threads. If
one of the threads concurrently calls execve(), de_thread() invokes
zap_other_threads() to kill all other threads. zap_other_threads()
aborts the pending group stop by resetting signal->group_stop_count to 0
and clears the JOBCTL_PENDING_MASK for all other threads. However, it
fails to clear the job control flags for the calling thread.
When execve() completes, the calling thread returns to user mode and
checks for pending signals. Seeing the stale JOBCTL_STOP_PENDING flag,
it calls do_signal_stop(), which invokes task_participate_group_stop().
Since JOBCTL_STOP_CONSUME is still set, it attempts to decrement the
already-zero signal->group_stop_count, triggering a warning:
sig->group_stop_count == 0
WARNING: CPU: 1 PID: 6475 at kernel/signal.c:373
task_participate_group_stop+0x215/0x2d0
Call Trace:
<TASK>
do_signal_stop+0x3be/0x5c0 kernel/signal.c:2619
get_signal+0xa8c/0x1330 kernel/signal.c:2884
arch_do_signal_or_restart+0xbc/0x840 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop+0x8c/0x4d0 kernel/entry/common.c:98
do_syscall_64+0x33e/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this race condition by clearing the JOBCTL_PENDING_MASK for the
calling thread in zap_other_threads(), ensuring it does not retain any
stale job control state after the thread group is destroyed. This aligns
with other functions that tear down a thread group and abort group
stops, such as zap_process() and complete_signal(), which correctly
clear these flags for all threads including the current one. |
| In the Linux kernel, the following vulnerability has been resolved:
quota: Fix race of dquot_scan_active() with quota deactivation
dquot_scan_active() can race with quota deactivation in
quota_release_workfn() like:
CPU0 (quota_release_workfn) CPU1 (dquot_scan_active)
============================== ==============================
spin_lock(&dq_list_lock);
list_replace_init(
&releasing_dquots, &rls_head);
/* dquot X on rls_head,
dq_count == 0,
DQ_ACTIVE_B still set */
spin_unlock(&dq_list_lock);
synchronize_srcu(&dquot_srcu);
spin_lock(&dq_list_lock);
list_for_each_entry(dquot,
&inuse_list, dq_inuse) {
/* finds dquot X */
dquot_active(X) -> true
atomic_inc(&X->dq_count);
}
spin_unlock(&dq_list_lock);
spin_lock(&dq_list_lock);
dquot = list_first_entry(&rls_head);
WARN_ON_ONCE(atomic_read(&dquot->dq_count));
The problem is not only a cosmetic one as under memory pressure the
caller of dquot_scan_active() can end up working on freed dquot.
Fix the problem by making sure the dquot is removed from releasing list
when we acquire a reference to it. |
| Race condition, use-after-free in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| The Bluetooth Mesh Access-layer delayable message queue in subsys/bluetooth/mesh/delayable_msg.c shares three intrusive lists (busy_ctx, free_ctx, free_chunks) and one k_work_delayable between two cooperative threads with no synchronization: bt_mesh_delayable_msg_manage() runs on the Bluetooth host RX thread, while delayable_msg_handler() runs on the system workqueue. Both block while the lists are in an intermediate state — the enqueuer in bt_rand(), both in bt_mesh_access_send() — which lets the other context observe torn state. delayable_msg_handler() used the result of sys_slist_get() on busy_ctx without a NULL check, and allocate_delayable_msg_ctx() tested sys_slist_is_empty() and then assumed a separate sys_slist_get() would succeed.
Because CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG and CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_CTX_ENABLED default to y, every model response to a received mesh message is parked on this queue, so the enqueuer runs as a direct consequence of inbound traffic. A peer that can get access-layer messages accepted by a model (it must hold the NetKey and a bound AppKey, so a legitimate or compromised network member) controls the arrival rate, the size of the elicited responses and the destination address, and thereby controls occupancy of the 4-entry context pool and the 40-entry chunk pool. Exhausting the chunk pool forces bt_mesh_delayable_msg_manage() down the purge path, which sends and releases the only queued message and leaves busy_ctx empty while the delayable work item is still armed; if the enqueuer then yields, the handler runs against the empty list.
The result is a read-modify-write through a NULL-based pointer (pending_msg->fired_time += 10) at a fixed low address on the system workqueue thread. On typical targets that faults, aborting the system workqueue thread — which stops all workqueue-driven functionality, including the mesh timing machinery — or resetting the node, so the impact is loss of availability of the affected node. The write value and address are fixed and no attacker-controlled length or index is involved, so this is not exploitable for memory corruption or code execution. The same unsynchronized window also allowed one message context to be selected and released by two contexts at once, producing duplicated transmissions, duplicated send-completion callbacks and crossed chunk ownership.
The fix serializes every list mutation with a k_spinlock that is never held across a blocking call, makes push_msg_from_delayable_msgs() detach the queue head atomically so a message being sent is on no list, removes the unchecked sys_slist_get() from delayable_msg_handler(), and drops any message that reaches the front of the queue while the stack is suspended or reset. |
| A race condition and thread-safety vulnerability exists in the web management daemon of Brocade Fabric OS versions before 10.0.1. When handling user authentication requests across a multi-threaded execution pool, this race condition causes PAM modules to process stale or incorrect client IP addresses and switch context numbers. This leads to inaccurate audit records and potential access control bypasses where AAA evaluation or Calling-Station-ID ACL policies rely on client IP attributes. |
| Use after free in Windows DHCP Client allows an unauthorized attacker to execute code over an adjacent network. |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From 2.2.7 until 2.2.11, ServiceSentinel.worker in service/singleton/servicesentinel.go checked an owned service under servicesLock and later dereferenced pointer-valued serviceStatusToday and serviceCurrentStatusData entries under serviceResponseDataStoreLock without revalidating that ServiceSentinel.Delete had not removed them. A RoleMember could concurrently report TCP or ICMP results through the member's own agent and delete the same owned service, causing a nil pointer dereference. Because the gRPC server had no recovery interceptor, the worker panic terminated the whole dashboard process and disrupted every tenant's web interface, REST API, and agent connections. The issue affects availability only and does not disclose or modify data. This issue is fixed in versions 2.2.11 and 2.3.0. |
| A race condition vulnerability exists in the request processing logic of the REST management interface on Brocade Fabric OS versions before 10.0.1. When handling concurrent incoming network management FCIP requests, a timing window exists between when a request populates the address variable and when the service constructs and returns the response context. As a result, the first request adopts the modified context, causing the service to return sensitive management details or configuration data belonging to the second context back to the original requester. |
| It was discovered that there was a ECDSA timing attack in the libgcrypt20 cryptographic library. Version affected: 1.8.4-5, 1.7.6-2+deb9u3, and 1.6.3-2+deb8u4. Versions fixed: 1.8.5-2 and 1.6.3-2+deb8u7. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows DHCP Server allows an unauthorized attacker to execute code over a network. |
| Race condition, use-after-free in the Graphics: Text component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Installer allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Clipboard User Service allows an authorized attacker to elevate privileges locally. |
| Improper privilege management in Windows Installer allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Credential Manager allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Background Intelligent Transfer Service (BITS) allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Cloud Files Mini Filter Driver allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Storage allows an authorized attacker to elevate privileges locally. |
