| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| networking.c in Redis before 3.2.7 allows "Cross Protocol Scripting" because it lacks a check for POST and Host: strings, which are not valid in the Redis protocol (but commonly occur when an attack triggers an HTTP request to the Redis TCP port). |
| selinux-policy when sysctl fs.protected_hardlinks are set to 0 allows local users to cause a denial of service (SSH login prevention) by creating a hardlink to /etc/passwd from a directory named .config, and updating selinux-policy. |
| Multiple insecure Temporary File vulnerabilities in 389 Administration Server before 1.1.38. |
| Tinfoil Devise-two-factor before 2.0.0 does not strictly follow section 5.2 of RFC 6238 and does not "burn" a successfully validated one-time password (aka OTP), which allows remote or physically proximate attackers with a target user's login credentials to log in as said user by obtaining the OTP through performing a man-in-the-middle attack between the provider and verifier, or shoulder surfing, and replaying the OTP in the current time-step. |
| ASA 5515-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim, ASA 5510 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.4.x before 8.4.7 Interim, 8.2.x before 8.2.5 Interim, 9.1.x before 9.1.6 Interim, ASA 5555-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5512-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5520 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.2.x before 8.2.5 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5505 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5525-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5512-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.1.x before 9.1.6 Interim, ASA 5545-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5585-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5540 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.2.x before 8.2.5 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5515-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5555-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.4.x before 9.4.1 Interim, 9.1.x before 9.1.6 Interim, ASA 5580 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.1.x before 9.1.6 Interim, ASA 5585-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim, 9.4.x before 9.4.1 Interim, ASA 5525-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.1.x before 9.1.6 Interim, ASA 5545-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP. 9.1.x before 9.1.6 ASA does not check the source of the ARP request or GARP packets for addresses it performs NAT translation for under unspecified conditions. |
| Find My iPhone on iOS 2.0 through 3.1.3 for iPhone 3G and later and iOS 2.1 through 3.1.3 for iPod touch (2nd generation) and later, when Find My iPhone is disabled, allows remote authenticated users with an associated MobileMe account to wipe the device. |
| Sandbox detection evasion vulnerability in hardware appliances in McAfee (now Intel Security) Advanced Threat Defense (MATD) 3.4.2.32 and earlier allows attackers to detect the sandbox environment, then bypass proper malware detection resulting in failure to detect a malware file (false-negative) via specially crafted malware. |
| NetApp Clustered Data ONTAP allows man-in-the-middle attackers to obtain sensitive information, gain privileges, or cause a denial of service by leveraging failure to enable SMB signing enforcement in its default state. |
| Samsung 850 Pro and PM851 solid-state drives and Seagate ST500LT015 and ST500LT025 hard disk drives, when used on Windows and operating in Opal mode on Lenovo ThinkPad T440s laptops with BIOS 2.32 or ThinkPad W541 laptops with BIOS 2.21, or in Opal or eDrive mode on Dell Latitude E6410 laptops with BIOS A16 or Latitude E6430 laptops with BIOS A16, allow physically proximate attackers to bypass self-encrypting drive (SED) protection by triggering a soft reset and booting from an alternative OS, aka a "Forced Restart Attack." |
| Samsung 850 Pro and PM851 solid-state drives and Seagate ST500LT015 and ST500LT025 hard disk drives, when in sleep mode and operating in Opal or eDrive mode on Lenovo ThinkPad T440s laptops with BIOS 2.32; ThinkPad W541 laptops with BIOS 2.21; Dell Latitude E6410 laptops with BIOS A16; or Latitude E6430 laptops with BIOS A16, allow physically proximate attackers to bypass self-encrypting drive (SED) protection by leveraging failure to detect when SATA drives are unplugged in Sleep Mode, aka a "Hot Plug attack." |
| The ntpq saveconfig command in NTP 4.1.2, 4.2.x before 4.2.8p6, 4.3, 4.3.25, 4.3.70, and 4.3.77 does not properly filter special characters, which allows attackers to cause unspecified impact via a crafted filename. |
| Detection bypass vulnerability in Intel Security Advanced Threat Defense (ATD) 3.4.6 and earlier allows malware samples to bypass ATD detection via renaming the malware. |
| ntpd in NTP 4.2.8p3 and NTPsec a5fb34b9cc89b92a8fef2f459004865c93bb7f92 relies on the underlying operating system to protect it from requests that impersonate reference clocks. Because reference clocks are treated like other peers and stored in the same structure, any packet with a source ip address of a reference clock (127.127.1.1 for example) that reaches the receive() function will match that reference clock's peer record and will be treated as a trusted peer. Any system that lacks the typical martian packet filtering which would block these packets is in danger of having its time controlled by an attacker. |
| The Grandstream Wave app 1.0.1.26 and earlier for Android does not use HTTPS when retrieving update information, which might allow man-in-the-middle attackers to execute arbitrary code via a crafted application. |
| The wp_ajax_update_plugin function in wp-admin/includes/ajax-actions.php in WordPress before 4.6 makes a get_plugin_data call before checking the update_plugins capability, which allows remote authenticated users to bypass intended read-access restrictions via the plugin parameter to wp-admin/admin-ajax.php, a related issue to CVE-2016-6896. |
| Vulnerability in the Oracle VM VirtualBox component of Oracle Virtualization (subcomponent: GUI). Supported versions that are affected are VirtualBox prior to 5.0.32 and prior to 5.1.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle VM VirtualBox. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle VM VirtualBox accessible data as well as unauthorized read access to a subset of Oracle VM VirtualBox accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle VM VirtualBox. CVSS v3.0 Base Score 6.3 (Confidentiality, Integrity and Availability impacts). |
| Vulnerability in the Oracle FLEXCUBE Private Banking component of Oracle Financial Services Applications (subcomponent: Product / Instrument Search). Supported versions that are affected are 2.0.1, 2.2.0 and 12.0.1. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle FLEXCUBE Private Banking. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle FLEXCUBE Private Banking accessible data as well as unauthorized read access to a subset of Oracle FLEXCUBE Private Banking accessible data. CVSS v3.0 Base Score 5.4 (Confidentiality and Integrity impacts). |
| An issue was discovered on the D-Link DWR-932B router. HELODBG on port 39889 (UDP) launches the "/sbin/telnetd -l /bin/sh" command. |
| Symantec Endpoint Protection Manager (SEPM) 12.1 before RU6 MP5 allows remote authenticated users to discover credentials via a brute-force attack. |
| Huawei E3276s USB modems with software before E3276s-150TCPU-V200R002B436D09SP00C00 allow man-in-the-middle attackers to intercept, spoof, or modify network traffic via unspecified vectors related to a fake network. |
