| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: LAG, Fix off-by-one in single-FDB error rollback
On failure at index i, the reverse cleanup loop in
mlx5_lag_create_single_fdb() starts from i, so the failed index
itself is rolled back. That can operate on uninitialized state or
double-tear-down a rule the add_one path already self-rolled-back.
Start the rollback from i - 1 so only successfully-installed entries
are undone. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing barriers when accessing stream->subrequests locklessly
The list of subrequests attached to stream->subrequests is accessed without
locks by netfs_collect_read_results() and netfs_collect_write_results(),
and then they access subreq->flags without taking a barrier after getting
the subreq pointer from the list. Relatedly, the functions that build the
list don't use any sort of write barrier when constructing the list to make
sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if
no lock is taken.
Fix this by:
(1) Add a new list_add_tail_release() function that uses a release barrier
to set the pointer to the new member of the list.
(2) Add a new list_first_entry_or_null_acquire() function that uses an
acquire barrier to read the pointer to the first member in a list (or
return NULL).
(3) Use list_add_tail_release() when adding a subreq to ->subrequests.
(4) Use list_first_entry_or_null_acquire() when initially accessing the
front of the list (when an item is removed, the pointer to the new
front iterm is obtained under the same lock). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the locking used by afs_get_link()
The afs filesystem in the kernel doesn't do locking correctly for symbolic
links. There are a number of problems:
(1) It doesn't do any locking around afs_read_single() to prevent races
between multiple ->get_link() calls, thereby allowing the possibility
of leaks.
(2) It doesn't use RCU barriering when accessing the buffer pointers
during RCU pathwalk.
(3) It can race with another thread updating the contents of the symlink
if a third party updated it on the server.
Fix this by the following means:
(0) Move symlink handling into its own file as this makes it more
complicated.
(1) Take the validate_lock around afs_read_single() to prevent races
between multiple ->get_link() calls.
(2) Keep a separate copy of the symlink contents with an rcu_head. This
is always going to be a lot smaller than a page, so it can be
kmalloc'd and save quite a bit of memory. It also needs a refcount
for non-RCU pathwalk.
(3) Split the symlink read and write-to-cache routines in afs from those
for directories.
(4) Discard the I/O buffer as soon as the write-to-cache completes as this
is a full page (plus a folio_queue).
(5) If there's no cache, discard the I/O buffer immediately after reading
and copying if there is no cache. |
| Sensitive Data Exposure vulnerability in Erlang OTP inets (httpc_response module) allows Retrieve Embedded Sensitive Data.
The httpc client forwards the Authorization and Proxy-Authorization request headers to redirect targets without checking whether the redirect crosses an origin boundary. httpc_response:redirect/2 constructs the redirected request by updating only the host field of the header record; all other fields (including authorization and proxy_authorization) are copied verbatim. The redirect target host is never compared against the original host.
autoredirect defaults to true, so this affects all httpc callers that do not explicitly disable automatic redirects.
An attacker who controls a server that the victim contacts via httpc can issue a cross-origin 3xx redirect to a server they also control. The Authorization header (including Basic credentials derived from URL userinfo via httpc_request:handle_user_info/2) is forwarded to the redirect target, allowing credential theft. The same applies to the Proxy-Authorization header.
This vulnerability is associated with program files lib/inets/src/http_client/httpc_response.erl.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.19, OTP 28.5.0.8, and OTP 29.1.2, corresponding to inets from 5.10 before 9.3.2.8, 9.6.2.4, and 9.8.1. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: Replace BUG_ON with error handling for CNID count checks
In a06ec283e125 next_id, folder_count, and file_count in the super block
info were expanded to 64 bits, and BUG_ONs were added to detect
overflow. This triggered an error reported by syzbot: if the MDB is
corrupted, the BUG_ON is triggered. This patch replaces this mechanism
with proper error handling and resolves the syzbot reported bug.
Singed-off-by: Jori Koolstra <jkoolstra@xs4all.nl> |
| The NEX-Forms WordPress plugin before 9.3.1 does not perform any authorization, ownership or request-validation checks before updating stored form entries, allowing unauthenticated attackers to overwrite, permanently erase, reassign or append to any previously submitted form entry by referencing its sequential identifier. |
| The GamiPress WordPress plugin before 8.0.6 does not perform a capability check or ownership verification on one of its authenticated AJAX actions, allowing any authenticated user, such as a Subscriber, to read arbitrary entries from its activity log, including other users' points balances and earned achievements and the usernames of the administrators who performed manual point award and revoke actions. |
| The Sifalo Pay WordPress plugin before 2.5.3 does not verify that a payment transaction identifier belongs to the order it is confirming, nor that the requester owns that order, allowing unauthenticated attackers holding one valid transaction identifier from a payment of their own to mark arbitrary pending orders as paid. |
| The Cart Abandonment Recovery for WooCommerce WordPress plugin before 2.1.4 does not verify ownership of the email address used to select an abandoned-cart record before deleting or overwriting it, allowing unauthenticated attackers who know a customer's email to destroy or tamper with that customer's stored abandoned-cart data. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: undo netns switch if renaming the wiphy fails
Once all the interfaces have been moved, cfg80211_switch_netns()
moves the wiphy itself by setting its network namespace and then
renaming it, which makes sysfs move it. The rename can fail (but
only on allocation failures), leaving things mixed up and hitting
the warning there.
Ignoring it isn't great, undo the move and let the change fail
in this case. If undo fails then WARN, then things would again
be stuck in two different network namespaces. |
| Thirty bees through 1.7.0 contains an authentication bypass vulnerability in PasswordController::resolveCustomer() that allows unauthenticated attackers to reset registered customers' passwords using guest account tokens. Attackers can place a guest order with the victim's email, then use the guest secure key to reset and take over the victim's account when guest checkout is enabled. |
| Heym v0.0.5 before v0.0.113 contains a broken access control vulnerability that allows former collaborators to keep executing JWT-auth workflows by reusing scoped workflow:execute tokens after share removal. Attackers can mint a token with a TTL up to 10 years, which the owner cannot list or revoke, and repeatedly run the workflow consuming shared credentials. |
| ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains a stack overflow in the MSL decoder caused by an incorrect depth check that fails to limit recursion. Attackers can supply a set of crafted MSL images that exhaust the stack when one of them is read, crashing the process and causing a denial of service. |
| When a Gitea Actions run was inserted, older runs in the same workflow-level concurrency group were cancelled without checking whether the new run still needed approval. Because fork pull request runs are inserted under the base repository, a user who can open a pull request from a fork could cancel trusted in-progress runs that share a concurrency group with `cancel-in-progress` enabled, without approval and without running any code. On self-hosted runners this can interrupt deployments and leave partial state behind. |
| In the Linux kernel, the following vulnerability has been resolved:
signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
When a multi-threaded process receives a stop signal (e.g., SIGSTOP),
do_signal_stop() sets JOBCTL_STOP_PENDING and JOBCTL_STOP_CONSUME on all
threads and sets signal->group_stop_count to the number of threads. If
one of the threads concurrently calls execve(), de_thread() invokes
zap_other_threads() to kill all other threads. zap_other_threads()
aborts the pending group stop by resetting signal->group_stop_count to 0
and clears the JOBCTL_PENDING_MASK for all other threads. However, it
fails to clear the job control flags for the calling thread.
When execve() completes, the calling thread returns to user mode and
checks for pending signals. Seeing the stale JOBCTL_STOP_PENDING flag,
it calls do_signal_stop(), which invokes task_participate_group_stop().
Since JOBCTL_STOP_CONSUME is still set, it attempts to decrement the
already-zero signal->group_stop_count, triggering a warning:
sig->group_stop_count == 0
WARNING: CPU: 1 PID: 6475 at kernel/signal.c:373
task_participate_group_stop+0x215/0x2d0
Call Trace:
<TASK>
do_signal_stop+0x3be/0x5c0 kernel/signal.c:2619
get_signal+0xa8c/0x1330 kernel/signal.c:2884
arch_do_signal_or_restart+0xbc/0x840 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop+0x8c/0x4d0 kernel/entry/common.c:98
do_syscall_64+0x33e/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this race condition by clearing the JOBCTL_PENDING_MASK for the
calling thread in zap_other_threads(), ensuring it does not retain any
stale job control state after the thread group is destroyed. This aligns
with other functions that tear down a thread group and abort group
stops, such as zap_process() and complete_signal(), which correctly
clear these flags for all threads including the current one. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix accept queue count leak on transport mismatch
virtio_transport_recv_listen() calls sk_acceptq_added() before
vsock_assign_transport(). If vsock_assign_transport() fails or
selects a different transport, the error path returns without
calling sk_acceptq_removed(), permanently incrementing
sk_ack_backlog.
After approximately backlog+1 such failures, sk_acceptq_is_full()
returns true, causing the listener to reject all new connections.
Fix by moving sk_acceptq_added() to after the transport validation,
matching the pattern used by vmci_transport and hyperv_transport. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: vport: fix self-deadlock on release of tunnel ports
vports are used concurrently and protected by RCU, so netdev_put()
must happen after the RCU grace period. So, either in an RCU call or
after the synchronize_net(). The rtnl_delete_link() must happen under
RTNL and so can't be executed in RCU context. Calling synchronize_net()
while holding RTNL is not a good idea for performance and system
stability under load in general, so calling netdev_put() in RCU call
is the right solution here.
However,
when the device is deleted, rtnl_unlock() will call netdev_run_todo()
and block until all the references are gone. In the current code this
means that we never reach the call_rcu() and the vport is never freed
and the reference is never released, causing a self-deadlock on device
removal.
Fix that by moving the rcu_call() before the rtnl_unlock(), so the
scheduled RCU callback will be executed when synchronize_net() is
called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself
is already released. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
The convert_chmap_v3() has a loop with its increment size of
cs_desc->wLength, but we forgot to validate cs_desc->wLength itself,
which may lead to potential endless loop by a malformed descriptor.
Add a proper size check to abort the loop for plugging the hole. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix soft lockup in retry_aligned_read()
When retry_aligned_read() encounters an overlapped stripe, it releases
the stripe via raid5_release_stripe() which puts it on the lockless
released_stripes llist. In the next raid5d loop iteration,
release_stripe_list() drains the stripe onto handle_list (since
STRIPE_HANDLE is set by the original IO), but retry_aligned_read()
runs before handle_active_stripes() and removes the stripe from
handle_list via find_get_stripe() -> list_del_init(). This prevents
handle_stripe() from ever processing the stripe to resolve the
overlap, causing an infinite loop and soft lockup.
Fix this by using __release_stripe() with temp_inactive_list instead
of raid5_release_stripe() in the failure path, so the stripe does not
go through the released_stripes llist. This allows raid5d to break out
of its loop, and the overlap will be resolved when the stripe is
eventually processed by handle_stripe(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix deadlock with check operation and nowait requests
When an array check is running it will raise the barrier at which point
normal requests will become blocked and increment the nr_pending value to
signal there is work pending inside of wait_barrier(). NOWAIT requests
do not block and so will return immediately with an error, and additionally
do not increment nr_pending in wait_barrier(). Upstream change commit
43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a
call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit
this condition. raid_end_bio_io() eventually calls allow_barrier() and
it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even
though the corresponding increment on nr_pending didn't happen in the
NOWAIT case.
This can be easily seen by starting a check operation while an application
is doing nowait IO on the same array. This results in a deadlocked state
due to nr_pending value underflowing and so the md resync thread gets stuck
waiting for nr_pending to == 0.
Output of r10conf state of the array when we hit this condition:
crash> struct r10conf
barrier = 1,
nr_pending = {
counter = -41
},
nr_waiting = 15,
nr_queued = 0,
Example of md_sync thread stuck waiting on raise_barrier() and other
requests stuck in wait_barrier():
md1_resync
[<0>] raise_barrier+0xce/0x1c0
[<0>] raid10_sync_request+0x1ca/0x1ed0
[<0>] md_do_sync+0x779/0x1110
[<0>] md_thread+0x90/0x160
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30
kworker/u1040:2+flush-253:4
[<0>] wait_barrier+0x1de/0x220
[<0>] regular_request_wait+0x30/0x180
[<0>] raid10_make_request+0x261/0x1000
[<0>] md_handle_request+0x13b/0x230
[<0>] __submit_bio+0x107/0x1f0
[<0>] submit_bio_noacct_nocheck+0x16f/0x390
[<0>] ext4_io_submit+0x24/0x40
[<0>] ext4_do_writepages+0x254/0xc80
[<0>] ext4_writepages+0x84/0x120
[<0>] do_writepages+0x7a/0x260
[<0>] __writeback_single_inode+0x3d/0x300
[<0>] writeback_sb_inodes+0x1dd/0x470
[<0>] __writeback_inodes_wb+0x4c/0xe0
[<0>] wb_writeback+0x18b/0x2d0
[<0>] wb_workfn+0x2a1/0x400
[<0>] process_one_work+0x149/0x330
[<0>] worker_thread+0x2d2/0x410
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30 |
