| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on MX Series allows adjacent subscribers to bypass configured firewall filters.
On MX Series devices with MPC10/11, LC4800/9600, and MX304 with subscribers configured on static interfaces, ingress firewall filters are not enforced, so that neither protocol level nor upstream bandwidth limitation are in effect.
This issue affects Junos OS on MX with MPC10/11, LC4800/9600/4802, and MX304:
* 23.2 versions from 23.2R2-S1 before 23.2R2-S7,
* 23.4 versions from 23.4R2 before 23.4R2-S7,
* 24.2 versions before 24.2R2-S3,
* 24.4 versions before 24.4R2-S2,
* 25.2 versions before 25.2R2. |
| In imgsensor, there is a possible application crash due to incorrect error handling. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11012302; Issue ID: MSV-7833. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fib_rules: Don't dump dying fib_rule in fib_rules_dump().
rocker_router_fib_event() calls fib_rule_get() during RCU dump.
If the fib_rule is dying, refcount_inc() will complain about it.
Let's call refcount_inc_not_zero() in fib_rules_dump(). |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, a malicious SSH server can crash a russh client session with a malformed KEX_ECDH_REPLY containing a server ephemeral value that is not 32 bytes long. The client-side Curve25519Kex::compute_shared_secret function in russh/src/kex/curve25519.rs passes the decoded exchange.server_ephemeral value to clone_from_slice without validating its length, causing a deterministic panic before the server host key is verified. The panic terminates the spawned client session task and surfaces as a JoinError, while the embedding process normally remains running. This issue is fixed in version 0.62.4. |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, an unauthenticated SSH client can cause a denial of service by sending SSH_MSG_KEX_ECDH_INIT with a 32-byte all-zero Q_C value. Curve25519Kex::server_dh in russh/src/kex/curve25519.rs accepts the all-zero peer public value and computes an all-zero shared secret, after which compute_exchange_hash calls encode_mpint in russh/src/kex/mod.rs and indexes beyond the end of the input while skipping leading zero bytes. The resulting panic occurs before authentication and terminates the server key-exchange task. This issue is fixed in version 0.62.4. |
| This vulnerability allows a normal (non-admin) user to disable the Forcepoint One Endpoint SafariExtension and bypass DLP protection in F1E Mac OS before v26.04.5758. |
| HCL DevOps Loop is affected by insufficient input validation that allows special characters where they should be restricted. This may result in unintended application behavior under certain conditions. |
| A vulnerability has been identified in Desigo DXR2 (All versions < V01.21.233.16-7862), Desigo PXC3 (All versions < V01.21.233.16-7862), Desigo PXC4 (All versions < V02.21.194.36-2715), Desigo PXC5.E003 (All versions < V02.21.194.36-2715), Desigo PXC5.E24 (All versions < V02.21.194.36-2715), Desigo PXC7 (All versions < V02.21.194.36-2715). The affected devices are vulnerable to a denial-of-service (DoS) vulnerability. An attacker can exploit this issue by sending a malformed BACnet packet, causing the device to stop responding to BACnet queries. Recovery requires a device reset or reboot to restore normal functionality. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-rc.1, RustFS Object Lock enforcement in crates/ecstore/src/bucket/object_lock/objectlock_sys.rs lets check_object_lock_for_deletion, delete_prefix, and lifecycle and scanner sweeps treat ConfigNotFound, unreadable .metadata.bin data, or unparseable metadata as no lock configuration, allowing objects under COMPLIANCE retention to be deleted or expired. This issue is fixed in version 1.0.0-rc.1. |
| A vulnerability in the interaction of SIP and Snort 3 for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 detection engine to restart.
This vulnerability is due to a lack of error-checking when SIP bidirectional flows are being inspected by Snort 3. An attacker could exploit this vulnerability by sending a stream of crafted SIP traffic through an interface on the targeted device. A successful exploit could allow the attacker to trigger a restart of the Snort 3 process, resulting in a denial of service (DoS) condition. |
| Improper verification of cryptographic signature and Improper Check for Unusual or Exceptional Conditions vulnerability in Estonian Information System Authority (RIA) libdigidocpp, DigiDoc4, DigiDoc on Android, and DigiDoc on iOS. This issue affects libdigidocpp: from 4.1.0 before 4.2.1; DigiDoc4: from 4.7.0 before 4.8.2; DigiDoc on Android: from 2.7.0 before 2.7.2; DigiDoc on iOS: from 2.8.0 before 2.8.1. |
| Incorrect boundary conditions in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 150, Thunderbird 150, Firefox ESR 140.10.1, Thunderbird 140.10.1, and Firefox ESR 115.35.2. |
| Multiple denial of service vulnerabilities in Palo Alto Networks PAN-OS® software allow an unauthenticated attacker with network access to cause a denial of service (DoS) condition by sending specially crafted network traffic to or through a dataplane interface. Repeated attempts to trigger this condition result in the firewall entering maintenance mode.
Panorama is not impacted by these vulnerabilities. |
| Malformed or out-of-sequence frames at the Aviation Very High Frequency Link Control X.25 layers cause repeated resets which may result in increased workload and reduced situational awareness. This type of attack can be carried out remotely over radio frequency. |
| Injection of false emergency or status messages over CPDLC may lead to misallocation of resources, operational confusion, and improper response actions by flight crews, traffic controllers, and ground operations. This type of attack can be carried out remotely over radio frequency. |
| A vulnerability has been found in epsilla-cloud vectordb up to 0.3.18/df5a5f5afb85a2376a0f2f316c79dea9b2c6ac7a. This impacts the function SplitTokens/ShuntingYard of the file engine/query/expr/expr.cpp of the component Filter Parser. Such manipulation leads to improper check for unusual conditions. The attack needs to be performed locally. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Socket.IO enables bidirectional and low-latency communication for every platform. Prior to 4.2.7, 3.4.5, and 3.3.6, a specially crafted Socket.IO packet can make the server wait for a large number of binary attachments and buffer them, which can be exploited to make the server run out of memory. This vulnerability is fixed in 4.2.7, 3.4.5, and 3.3.6. |
| CWE-754: Improper Check for Unusual or Exceptional Conditions vulnerability that could cause arbitrary code execution, denial of service and loss of confidentiality & integrity when communicating over the Modbus TCP protocol. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix warning when destroy 'cifs_io_request_pool'
There's a issue as follows:
WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0
RIP: 0010:free_large_kmalloc+0xac/0xe0
Call Trace:
<TASK>
? __warn+0xea/0x330
mempool_destroy+0x13f/0x1d0
init_cifs+0xa50/0xff0 [cifs]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Obviously, 'cifs_io_request_pool' is not created by mempool_create().
So just use mempool_exit() to revert 'cifs_io_request_pool'. |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error
The `nouveau_dmem_copy_one` function ensures that the copy push command is
sent to the device firmware but does not track whether it was executed
successfully.
In the case of a copy error (e.g., firmware or hardware failure), the
copy push command will be sent via the firmware channel, and
`nouveau_dmem_copy_one` will likely report success, leading to the
`migrate_to_ram` function returning a dirty HIGH_USER page to the user.
This can result in a security vulnerability, as a HIGH_USER page that may
contain sensitive or corrupted data could be returned to the user.
To prevent this vulnerability, we allocate a zero page. Thus, in case of
an error, a non-dirty (zero) page will be returned to the user. |
