| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset the AP_VLAN tailroom counter on ifdown
On ifup, AP_VLAN interfaces get crypto_tx_tailroom_needed_cnt from
the AP interface, but it's never decremented again unless the AP is
also brought down. Thus, bringing the same AP_VLAN up again will
increment the counter again and eventually hit the sanity check:
WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt !=
master->crypto_tx_tailroom_needed_cnt);
Reset it on ifdown to avoid that. |
| Progress MarkLogic Server 12.x releases before 12.1.0 and 11.x releases before 11.3.7 enable XML external entity processing by default in multiple server paths, which could allow crafted XML to cause server-side requests or disclosure of local files. |
| A security issue was discovered in MongoDB mongos (the sharded cluster router) where an authenticated user with readWrite privileges could crash the mongos process by crafting a specially formed aggregation pipeline. The issue leverages an internal aggregation stage that lacks proper authorization checks despite being intended for internal use, allowing a subsequent stage to be forced to execute on the router under conditions it was not designed to handle. This results in an unhandled fatal error that causes the mongos process to immediately abort, resulting in denial of service for all clients routed through the affected mongos instance. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::Ccsds::SpacePacketDeframer dataIn_handler is vulnerable because the handler treats the minimum packet-length condition as FW_ASSERT rather than rejecting and returning the buffer. When a CCSDS telecommand frame leaves a payload of six bytes or fewer after TcDeframer removes its header and trailer, the assertion aborts or resets the flight-software process, causing denial of service. This issue is fixed in version 4.2.0. |
| Previously issued authentication tokens are not immediately invalidated when an OTRS agent or customer user account is deactivated or its password is changed. As a result, an existing JWT may remain valid until its regular expiration time, which can be approximately 16 hours.
An attacker who has previously obtained a valid authentication token can therefore continue to access OTRS with the privileges of the affected agent or customer user even after the corresponding account has been deactivated or the user's password has been changed.
The vulnerability does not allow an attacker to obtain authentication tokens by itself. Exploitation requires possession of a previously issued and still valid token. The actual impact depends on the privileges associated with the compromised token. Customer user tokens are limited to the permissions of the affected customer account, while agent tokens may provide access to broader ticket, customer, or administrative functionality depending on the assigned permissions.
This issue affects OTRS:
* 7.0.X
* 8.0.X
* 2023.X
* 2024.X
* 2025.X
* 2026.X before 2026.7.X |
| Insufficient Session Expiration vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.6 and from 2026.0.0 before 2026.0.4. |
| An issue was discovered in JasPer 2.0.14. There is an access violation in the function jas_image_readcmpt in libjasper/base/jas_image.c, leading to a denial of service. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::FileDownlink SendPartial range validation is vulnerable because the wrapping sum bypasses file-range validation, becomes m_endOffset, and leaves m_byteOffset greater than the wrapped end offset. When an existing source file is larger than the supplied startOffset and a caller able to issue SendPartial supplies a length whose U32 sum with that offset wraps, the first data-packet send reaches FW_ASSERT and aborts or resets the process, causing denial of service. This issue is fixed in version 4.3.0. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Fw::FilePacket deserialization used by Svc::FileUplink is vulnerable because Header deserialization casts the byte to the Type enum without validating its range and FilePacket::fromSerialBuffer reaches a default FW_ASSERT. When a network file packet contains an unknown file-packet type byte, the assertion aborts or resets the default Ref application process, causing denial of service. This issue is fixed in version 4.2.0. |
| Enterprise Architect is vulnerable to XML External Entity (XXE) injection in the XSLT Debugger feature. When a user loads a crafted XML file containing a `DOCTYPE` with an external DTD reference, the parser processes external entities, allowing an attacker to read arbitrary files from the victim's filesystem.
Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 17.1 but may also affect other versions. |
| An unix symbolic link (symlink) following vulnerability has been reported to affect QuMagie. If a remote attacker gains a user account, they can then exploit the vulnerability to compromise the security of the system.
We have already fixed the vulnerability in the following version:
QuMagie 2.9.2 and later |
| In the Linux kernel, the following vulnerability has been resolved:
printk: Don't WARN on kthread_run failure.
Since __kthread_create_on_node() returns -EINTR upon SIGKILL,
we should not use WARN_ON() in order to catch kthread_run() failure. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix locally exploitable BUG_ON in amdxdna_insert_pages()
In amdxdna_insert_pages(), vm_flags_mod() sets VM_MIXEDMAP and clears
VM_PFNMAP. If an unprivileged userspace process mmaps a non-imported GEM
object and then calls madvise(MADV_DONTNEED), the PTEs will be
successfully cleared because VM_MIXEDMAP allows this (unlike VM_PFNMAP).
When userspace subsequently accesses the memory, drm_gem_shmem_fault()
handles the page fault and attempts to map the backing shmem page via
vmf_insert_pfn() which calls vmf_insert_pfn_prot(). Because the backing
shmem page is normal system memory (pfn_valid(pfn) is true) and the VMA
now has VM_MIXEDMAP set, won't this predictably trigger the explicit
assertion BUG_ON((vma->vm_flags & VM_MIXEDMAP) && pfn_valid(pfn))
Fix by removing the vm_flags_mod() call and replacing the vm_insert_pages()
pre-population with the handle_mm_fault() loop that was already used for
the import (dma-buf) path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind
syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via
pn_socket_autobind():
kernel BUG at net/phonet/socket.c:213!
RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline]
RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421
Call Trace:
sock_sendmsg_nosec+0x112/0x150 net/socket.c:797
__sock_sendmsg net/socket.c:812 [inline]
__sys_sendto+0x402/0x590 net/socket.c:2280
...
pn_socket_autobind() calls pn_socket_bind() with port 0 and, on
-EINVAL, assumes the socket was already bound and asserts that the
port is non-zero:
err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn));
if (err != -EINVAL)
return err;
BUG_ON(!pn_port(pn_sk(sock->sk)->sobject));
return 0; /* socket was already bound */
However pn_socket_bind() also returns -EINVAL when sk->sk_state is not
TCP_CLOSE, even when the socket has never been bound and pn_port() is
still 0. In that case the BUG_ON() fires and panics the kernel from a
user-triggerable path.
Treat the "bind returned -EINVAL but pn_port() is still 0" case as a
regular error and propagate -EINVAL to the caller instead of crashing.
Existing callers already translate a non-zero return from
pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here
only changes behaviour from panic to a normal errno. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
(cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref()
There is no need to BUG(), we can just return an error and log an error
message. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: Replace BUG_ON with error handling for CNID count checks
In a06ec283e125 next_id, folder_count, and file_count in the super block
info were expanded to 64 bits, and BUG_ONs were added to detect
overflow. This triggered an error reported by syzbot: if the MDB is
corrupted, the BUG_ON is triggered. This patch replaces this mechanism
with proper error handling and resolves the syzbot reported bug.
Singed-off-by: Jori Koolstra <jkoolstra@xs4all.nl> |
| Heym v0.0.5 before v0.0.113 contains a broken access control vulnerability that allows former collaborators to keep executing JWT-auth workflows by reusing scoped workflow:execute tokens after share removal. Attackers can mint a token with a TTL up to 10 years, which the owner cannot list or revoke, and repeatedly run the workflow consuming shared credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
When a multi-threaded process receives a stop signal (e.g., SIGSTOP),
do_signal_stop() sets JOBCTL_STOP_PENDING and JOBCTL_STOP_CONSUME on all
threads and sets signal->group_stop_count to the number of threads. If
one of the threads concurrently calls execve(), de_thread() invokes
zap_other_threads() to kill all other threads. zap_other_threads()
aborts the pending group stop by resetting signal->group_stop_count to 0
and clears the JOBCTL_PENDING_MASK for all other threads. However, it
fails to clear the job control flags for the calling thread.
When execve() completes, the calling thread returns to user mode and
checks for pending signals. Seeing the stale JOBCTL_STOP_PENDING flag,
it calls do_signal_stop(), which invokes task_participate_group_stop().
Since JOBCTL_STOP_CONSUME is still set, it attempts to decrement the
already-zero signal->group_stop_count, triggering a warning:
sig->group_stop_count == 0
WARNING: CPU: 1 PID: 6475 at kernel/signal.c:373
task_participate_group_stop+0x215/0x2d0
Call Trace:
<TASK>
do_signal_stop+0x3be/0x5c0 kernel/signal.c:2619
get_signal+0xa8c/0x1330 kernel/signal.c:2884
arch_do_signal_or_restart+0xbc/0x840 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop+0x8c/0x4d0 kernel/entry/common.c:98
do_syscall_64+0x33e/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this race condition by clearing the JOBCTL_PENDING_MASK for the
calling thread in zap_other_threads(), ensuring it does not retain any
stale job control state after the thread group is destroyed. This aligns
with other functions that tear down a thread group and abort group
stops, such as zap_process() and complete_signal(), which correctly
clear these flags for all threads including the current one. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption. |
