| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
freezer,umh: Fix call_usermode_helper_exec() vs SIGKILL
Tetsuo-San noted that commit f5d39b020809 ("freezer,sched: Rewrite
core freezer logic") broke call_usermodehelper_exec() for the KILLABLE
case.
Specifically it was missed that the second, unconditional,
wait_for_completion() was not optional and ensures the on-stack
completion is unused before going out-of-scope. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: nullify cq->dbg pointer in mlx5_debug_cq_remove()
Prior to this patch in case mlx5_core_destroy_cq() failed it proceeds
to rest of destroy operations. mlx5_core_destroy_cq() could be called again
by user and cause additional call of mlx5_debug_cq_remove().
cq->dbg was not nullify in previous call and cause the crash.
Fix it by nullify cq->dbg pointer after removal.
Also proceed to destroy operations only if FW return 0
for MLX5_CMD_OP_DESTROY_CQ command.
general protection fault, probably for non-canonical address 0x2000300004058: 0000 [#1] SMP PTI
CPU: 5 PID: 1228 Comm: python Not tainted 5.15.0-rc5_for_upstream_min_debug_2021_10_14_11_06 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:lockref_get+0x1/0x60
Code: 5d e9 53 ff ff ff 48 8d 7f 70 e8 0a 2e 48 00 c7 85 d0 00 00 00 02
00 00 00 c6 45 70 00 fb 5d c3 c3 cc cc cc cc cc cc cc cc 53 <48> 8b 17
48 89 fb 85 d2 75 3d 48 89 d0 bf 64 00 00 00 48 89 c1 48
RSP: 0018:ffff888137dd7a38 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffff888107d5f458 RCX: 00000000fffffffe
RDX: 000000000002c2b0 RSI: ffffffff8155e2e0 RDI: 0002000300004058
RBP: ffff888137dd7a88 R08: 0002000300004058 R09: ffff8881144a9f88
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881141d4000
R13: ffff888137dd7c68 R14: ffff888137dd7d58 R15: ffff888137dd7cc0
FS: 00007f4644f2a4c0(0000) GS:ffff8887a2d40000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b4500f4380 CR3: 0000000114f7a003 CR4: 0000000000170ea0
Call Trace:
simple_recursive_removal+0x33/0x2e0
? debugfs_remove+0x60/0x60
debugfs_remove+0x40/0x60
mlx5_debug_cq_remove+0x32/0x70 [mlx5_core]
mlx5_core_destroy_cq+0x41/0x1d0 [mlx5_core]
devx_obj_cleanup+0x151/0x330 [mlx5_ib]
? __pollwait+0xd0/0xd0
? xas_load+0x5/0x70
? xa_load+0x62/0xa0
destroy_hw_idr_uobject+0x20/0x80 [ib_uverbs]
uverbs_destroy_uobject+0x3b/0x360 [ib_uverbs]
uobj_destroy+0x54/0xa0 [ib_uverbs]
ib_uverbs_cmd_verbs+0xaf2/0x1160 [ib_uverbs]
? uverbs_finalize_object+0xd0/0xd0 [ib_uverbs]
ib_uverbs_ioctl+0xc4/0x1b0 [ib_uverbs]
__x64_sys_ioctl+0x3e4/0x8e0 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Improve SCSI abort handling
The following has been observed on a test setup:
WARNING: CPU: 4 PID: 250 at drivers/scsi/ufs/ufshcd.c:2737 ufshcd_queuecommand+0x468/0x65c
Call trace:
ufshcd_queuecommand+0x468/0x65c
scsi_send_eh_cmnd+0x224/0x6a0
scsi_eh_test_devices+0x248/0x418
scsi_eh_ready_devs+0xc34/0xe58
scsi_error_handler+0x204/0x80c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
That warning is triggered by the following statement:
WARN_ON(lrbp->cmd);
Fix this warning by clearing lrbp->cmd from the abort handler. |
| HCL iControl v4.3.0 was affected by Security Misconfiguration vulnerabilities. It involves the public exposure of internal configuration files due to improper web server or application hardening. |
| Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Configurator). Supported versions that are affected are MySQL Server: 9.7.0-9.7.1; MySQL Cluster: 9.7.0-9.7.1. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where MySQL Server, MySQL Cluster executes to compromise MySQL Server, MySQL Cluster. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in takeover of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 6.7 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H). |
| Due to a missing sanitization call in [`afsql_dd_run_query`](https://github.com/syslog-ng/syslog-ng/blob/649e6e18e3459fb4467000a88dfb12fa97f9719c/modules/afsql/afsql.c#L219), syslog-ng before 4.12 are vulnerable to SQL injection from an untrusted source. This is not part of the default configuration, the SQL driver has to be manually configured.
Fixes are in syslog-ng 4.12, syslog-ng Premium Edition 8.2 and syslog-ng Store Box 7.8 |
| OpenWrt is a Linux operating system targeting embedded devices. Prior to 25.12.5, odhcpd writes a DHCPv6 client FQDN option 39 hostname into /tmp/odhcpd.leases through src/statefiles.c statefiles_write_state6() and statefiles_write_state4() without escaping, allowing newline injection of forged lease lines that LuCI rpcd-mod-luci getDHCPLeases displays through htdocs/luci-static/resources/view/status/include/40_dhcp.js and htdocs/luci-static/resources/luci.js dom.append as live HTML in the Active DHCPv6 Leases admin page. This vulnerability is fixed in 25.12.5. |
| Dashy is a self-hostable personal dashboard. Prior to 4.0.8, Dashy deployments using OIDC can allow unauthenticated users or non-admin authenticated users to write changes to the main config.yaml through the config-saving functionality despite configured permissions, allowing unauthorized modification of dashboard configuration and potential service disruption. This issue is fixed in version 4.0.8. |
| Dräger Infinity Delta, Delta XL, and Kappa patient monitors contain a denial-of-service vulnerability that allows remote attackers to cause the monitor to reboot by sending a malformed network packet. Attackers can repeatedly send malformed network packets to disrupt patient monitoring until the device falls back to default configuration and loses network connectivity. |
| SAP CRM WebClient UI allows an attacker to inject and execute malicious scripts in the context of the application due to the absence of a Content Security Policy (CSP) configuration for certain restrictive directives. This vulnerability has a low impact on the integrity of the application. Confidentiality and availability are not impacted. |
| App::Ack versions through 3.10.0 for Perl print unsanitised terminal escape sequences from filenames in several output modes.
When ack prints a filename whose basename contains terminal control bytes such as ANSI escape sequences, those bytes reach the terminal unchanged. Version 3.10.0 added a _safe_filename helper that sanitises the filenames printed by -f, -g, the colored match heading, and per-match lines, but the --show-types, -l/-L, and -c paths still emit the raw filename.
A file whose name embeds cursor-movement or color escapes can overwrite or recolor earlier terminal output, or be passed unchanged to a downstream consumer. |
| An improper authorization vulnerability in the Plesk XML API allows an authenticated user to inject arbitrary configuration directives, resulting in arbitrary file write as root and full privilege escalation on the underlying server. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, a structural flaw was identified in DefaultCertValidator::verifySubjectAltName where the extracted DNS SAN string is cast to a C-style string using .c_str() before being passed to the Utility::dnsNameMatch() algorithm. If the attacker serves a certificate with a dNSName SAN containing an embedded NUL byte, the helper Utility::generalNameAsString captures the complete string including the NUL. However, when .c_str() evaluates it, implicit conversion to absl::string_view inside dnsNameMatch relies on strlen(), prematurely truncating the evaluation context. Envoy evaluates trucated string against the exact required config_san match and returns true, thereby successfully validating the string with the Nul byte for an upstream routing. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| pnpm is a package manager. Prior to 10.34.2 and 11.5.3, pnpm and pacquet expanded ${ENV_VAR} placeholders from repository-controlled .npmrc and pnpm-workspace.yaml into registry request destinations and registry credentials. A malicious repository could cause dependency resolution to send victim environment secrets to an attacker-selected registry before lifecycle scripts run. This vulnerability is fixed in 10.34.2 and 11.5.3. |
| Net::Statsite::Client versions through 1.1.0 for Perl allow metric injections.
Net::Statsite::Client is a client for the statsite protocol, which is a variant of statsd.
Newlines are not removed from metric names, allowing metric injections.
Values are not sanitised for newlines or other protocol control characters such as colons or pipes, allowing metric injections. |
| Net::Statsd::Lite versions through 0.10.0 for Perl allowed metric injections.
The values from the set_add method were not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics.
Note that version 0.9.0 fixed a similar issue CVE-2026-46719 for metric names. |
| Net::Async::Statsd::Client versions through 0.005 for Perl allow metric injections.
The metric names are not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics. |
| Metrics::Any::Adapter::SignalFx versions before 0.04 for Perl does not protect against metric injections.
The statsd protocol (and extensions such as dogstatsd) allow mutiple metrics, separated by newlines, to be sent per packet.
Metrics::Any::Adapter::SignalFx which extends Metrics::Any::Adapter::Statsd, which has a similar vulnerability.
In addition, the _labels function does not check tags labels newlines or statsd control characters. The labels can be used for metric injections. |
| Metrics::Any::Adapter::DogStatsd versions before 0.04 for Perl does not protect against metric injections.
The statsd protocol (and extensions such as dogstatsd) allow mutiple metrics, separated by newlines, to be sent per packet.
Metrics::Any::Adapter::DogStatsd which extends Metrics::Any::Adapter::Statsd, which has a similar vulnerability.
In addition, the _tags function does not check tags for newlines or statsd control characters. The tags can be used for metric injections. |
| Metrics::Any::Adapter::Statsd versions before 0.04 for Perl does not protect against metric injections.
The statsd protocol (and extensions) allow mutiple metrics, separated by newlines, to be sent per packet.
The send method does not validate the contents of the metric names or values. If the names have newlines and statsd control characters (colon, pipe) then metric injections are possible.
Version 0.04 fixed this by modifying the _make method to block metric names with characters below ASCII 32 (which includes the newline), or colons or pipes. |
