| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Unspecified vulnerability in the Multicast Virtual Private Network (MVPN) implementation in Cisco IOS 12.0, 12.2, 12.3, and 12.4 allows remote attackers to create "extra multicast states on the core routers" via a crafted Multicast Distribution Tree (MDT) Data Join message. |
| Cisco IOS 12.2(15) and earlier allows remote attackers to cause a denial of service (refused VTY (virtual terminal) connections), via a crafted TCP connection to the Telnet or reverse Telnet port. |
| Attackers can crash a Cisco IOS router or device, provided they can get to an interactive prompt (such as a login). This applies to some IOS 9.x, 10.x, and 11.x releases. |
| Buffer overflow in the HTTP server for Cisco IOS 12.2 and earlier allows remote attackers to execute arbitrary code via an extremely long (2GB) HTTP GET request. |
| Cisco IOS 11.2.x and 12.0.x does not limit the size of its redirect table, which allows remote attackers to cause a denial of service (memory consumption) via spoofed ICMP redirect packets to the router. |
| The design of the Hot Standby Routing Protocol (HSRP), as implemented on Cisco IOS 12.1, when using IRPAS, allows remote attackers to cause a denial of service (CPU consumption) via a router with the same IP address as the interface on which HSRP is running, which causes a loop. |
| Cisco 2611 router running IOS 12.1(6.5), possibly an interim release, allows remote attackers to cause a denial of service via port scans such as (1) scanning all ports on a single host and (2) scanning a network of hosts for a single open port through the router. NOTE: the vendor could not reproduce this issue, saying that the original reporter was using an interim release of the software. |
| A vulnerability in the implementation of the CLI on a device that is running ConfD could allow an authenticated, local attacker to perform a command injection attack.
The vulnerability is due to insufficient validation of a process argument on an affected device. An attacker could exploit this vulnerability by injecting commands during the execution of this process. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privilege level of ConfD, which is commonly root. |
| A vulnerability in the Internet Key Exchange version 2 (IKEv2) feature of Cisco IOS Software, Cisco IOS XE Software, Cisco Secure Firewall Adaptive Security Appliance (ASA) Software, and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit of Cisco IOS Software and IOS XE Software could allow the attacker to cause the affected device to reload, resulting in a DoS condition. A successful exploit of Cisco Secure Firewall ASA Software and Secure FTD Software could allow the attacker to partially exhaust system memory, resulting in system instability, such as the inability to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| A vulnerability in the web-based Cisco IOx application hosting environment management interface of Cisco IOS XE Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| A vulnerability in the web-based Cisco IOx application hosting environment management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform a carriage return line feed (CRLF) injection attack against a user.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to arbitrarily inject log entries, manipulate the structure of log files, or obscure legitimate log events. |
| A vulnerability in the Secure Copy Protocol (SCP) server feature of Cisco IOS XE Software could allow an authenticated, local attacker with low privileges to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of a malformed SCP request. An attacker could exploit this vulnerability by issuing a crafted command through SSH. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability exists because incorrect privileges are associated with the start maintenance command. An attacker could exploit this vulnerability by accessing the management CLI of the affected device as a low-privileged user and using the start maintenance command. A successful exploit could allow the attacker to put the device in maintenance mode, which shuts down interfaces, resulting in a denial of service (DoS) condition. In case of exploitation, a device administrator can connect to the CLI and use the stop maintenance command to restore operations. |
| A vulnerability in the bootloader of Cisco IOS XE Software for Cisco Catalyst 9200 Series Switches, Cisco Catalyst ESS9300 Embedded Series Switches, Cisco Catalyst IE9310 and IE9320 Rugged Series Switches, and Cisco IE3500 and IE3505 Rugged Series Switches could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to an affected device to execute arbitrary code at boot time and break the chain of trust.
This vulnerability is due to insufficient validation of software at boot time. An attacker could exploit this vulnerability by manipulating the loaded binaries on an affected device to bypass some of the integrity checks that are performed during the boot process. A successful exploit could allow the attacker to execute code that bypasses the requirement to run Cisco-signed images.
Cisco has assigned this security advisory a Security Impact Rating (SIR) of High rather than Medium as the score indicates because this vulnerability allows an attacker to bypass a major security feature of a device. |
| A vulnerability in the processing of Control and Provisioning of Wireless Access Points (CAPWAP) packets of Cisco IOS XE Wireless Controller Software for the Catalyst CW9800 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of a malformed CAPWAP packet. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition. |
| A vulnerability in the TLS library of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust the available memory of an affected device.
This vulnerability is due to improper management of memory resources during TLS connection setup. An attacker could exploit this vulnerability by repeatedly triggering the conditions that cause the memory increase. This could be done in a variety of ways, such as by repeatedly attempting Extensible Authentication Protocol (EAP) authentication when local EAP is enabled on an affected device or by using a machine-in-the-middle attack and resetting TLS connections between the affected device and other devices. A successful exploit could allow the attacker to exhaust the available memory on an affected device, resulting in an unexpected reload and a denial of service (DoS) condition. |
| A vulnerability in the DHCP snooping feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause BOOTP packets to be forwarded between VLANs, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper handling of BOOTP packets on Cisco Catalyst 9000 Series Switches. An attacker could exploit this vulnerability by sending BOOTP request packets to an affected device. A successful exploit could allow an attacker to forward BOOTP packets from one VLAN to another, resulting in BOOTP VLAN leakage and potentially leading to high CPU utilization. This makes the device unreachable (either through console or remote management) and unable to forward traffic, resulting in a DoS condition.
Note: This vulnerability can be exploited with either unicast or broadcast BOOTP packets.
There are workarounds that address this vulnerability. |
| A vulnerability in the HTTP Server feature of Cisco IOS Software and Cisco IOS XE Software Release 3E could allow an authenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malformed HTTP requests to an affected device. A successful exploit could allow the attacker to cause a watchdog timer to expire and the device to reload, resulting in a DoS condition. To exploit this vulnerability, the attacker must have a valid user account. |
| A vulnerability in Cisco IOS XE Software for Cisco Meraki could allow a remote, unauthenticated attacker to view confidential device information.
This vulnerability is due to a device configuration upload being performed over an insecure tunnel. An attacker could exploit this vulnerability by conducting an on-path attack between the affected device and the Cisco Meraki Dashboard. A successful exploit could allow the attacker to view sensitive device configuration information. |
| A vulnerability in the Lobby Ambassador web-based management API of Cisco IOS XE Software could allow an authenticated, remote attacker to elevate their privileges and access management APIs that would not normally be available for Lobby Ambassador users.
This vulnerability exists because parameters that are received by an API endpoint are not sufficiently validated. An attacker could exploit this vulnerability by authenticating as a Lobby Ambassador user and sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to create a new user with privilege level 1 access to the web-based management API. The attacker would then be able to access the device with these new credentials and privileges. |
