| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds read in Desktop Window Manager allows an authorized attacker to disclose information locally. |
| Null pointer dereference in Windows VMSwitch allows an authorized attacker to deny service locally. |
| Use after free in Windows Cryptographic Services allows an authorized attacker to execute code over a network. |
| Heap-based buffer overflow in Windows Subsystem for Linux allows an authorized attacker to elevate privileges locally. |
| Missing release of memory after effective lifetime in Remote Desktop Gateway Service allows an unauthorized attacker to deny service over a network. |
| Improper enforcement of behavioral workflow in Windows DNS allows an unauthorized attacker to deny service over a network. |
| Incorrect authorization in DNS Server allows an authorized attacker to perform tampering locally. |
| Heap-based buffer overflow in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: harden adjust_idledly() against divide-by-zero and overflow
adjust_idledly() has several corner-case issues flagged during review:
1. If xe_gt_clock_init() failed to recognise the crystal clock,
gt->info.timestamp_base is 0, which makes idledly_units_ps also 0.
The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a
divide-by-zero and panics the kernel.
2. The tick-to-ns conversions are done in u32:
idledly * idledly_units_ps, (maxcnt - 1) * 1000
Both overflow u32 before DIV_ROUND_CLOSEST() sees them.
3. If IDLE_WAIT_TIME reads back as 0, maxcnt evaluates to 0 and
the maxcnt - 1 clamp wraps to 0xFFFFFFFF in u32.
4. The register only stores whole ticks, so the clamped ns value has
to be converted to ticks and back. DIV_ROUND_CLOSEST() can round
that conversion up past maxcnt:
maxcnt = 640 ns, one tick = 666664 ps
clamp: maxcnt - 1 = 639 ns
ns -> ticks: 639000 / 666664 = 0.958 -> rounds to 1 tick
tick -> ns: 1 * 666664 / 1000 = 667 ns
667 ns is programmed into RING_IDLEDLY, but 667 >= maxcnt (640),
so xe_gt_WARN_ON() fires again on every subsequent init.
Return early if timestamp_base is 0 (the unknown-crystal path).
Do the conversions in u64 via the *_ULL() helpers so they cannot wrap.
Clamp with a floor (DIV_ROUND_DOWN_ULL) so the programmed delay stays
strictly below maxcnt, and guard the maxcnt == 0 case with a zero delay
while still writing RING_IDLEDLY so INHIBIT_SWITCH_UNTIL_PREEMPTED is
cleared.
v2: Drop the redundant warn on the timestamp_base == 0 path;
xe_gt_clock_init() already warns on an unrecognised crystal clock.
Keep the early return to avoid the divide-by-zero. - Vinay
v3: Field-mask the RING_IDLEDLY write with REG_FIELD_PREP(IDLE_DELAY, ...)
instead of writing the raw tick count, which could clobber
INHIBIT_SWITCH_UNTIL_PREEMPTED and reserved bits. Split the
inhibit-switch clear from the maxcnt clamp so a set inhibit bit no
longer forces a needless delay overwrite when the delay itself is
already valid. Use gt_to_xe(gt) instead of gt_to_xe(hwe->gt).
(cherry picked from commit d864065ea25e9d12897c175de9176ce46677e176) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Remove sink usage from DPMS
[Why]
stream->sink is optional and can be null, so should always be checked
before dereference. Additionally, most of its usage in DPMS sequences
is for stream->sink->link, which can be replaced with stream->link,
as the two should always be the same.
[How]
* Replace stream->sink->link in DPMS on/off
* Add assert to USB4 BW allocation where sink is required
* Avoid inconsistencies in resource access, e.g. don't repeat
stream->link after it was already saved to a local variable
* Pull out effective VPG calculation to helper getter
* Formatting fixes |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix life cycle of the nested_mmus array
The nested_mmus array holds the shadow page tables that are used when
a guest is running a nested context. These structures are allocated on
VCPU_INIT for whole guest, which implies that they may have to be
relocated as the array grows.
Should a VCPU_INIT occur whilst a vcpu is actively running an L2 and
that the allocation requires relocation, that vcpu will still be
running with a pointer to the previous structure, which will have been
freed.
Fix this by turning the array of structures to an array of pointers,
which is now allocated at VM creation, sized to the absolute maximum
that KVM can handle.
In turn, each VCPU_INIT contributes S2_MMU_PER_VCPU to the pool. No
reallocation is ever performed, and the life cycle of each object is
much clearer:
- the nested_mmus array is allocated in kvm_init_nested(), and freed
in kvm_arch_destroy_vm()
- s2_mmu structures are allocated in kvm_vcpu_init_nested(), and freed
on kvm_arch_flush_shadow_all()
Finally, the freeing of vcpu->arch.vncr_array is made consistent
rather than being done on some failure paths, but not others. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2
pkvm_init_features_from_host() takes KVM_ARCH_FLAG_GUEST_HAS_SVE and
KVM_ARM_VCPU_SVE from the host separately, but pkvm_vcpu_init_sve()
tests the bit while vcpu_has_sve() reads the flag. A host that sets the
flag without the bit gets a vCPU with a NULL sve_state that the world
switch loads the guest's SVE state from.
Derive the flag from the bit, and drop the protected path's copy of the
host's flag, which is dead code since protected VMs are not allowed SVE. |
| Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In versions 0.9rc2 and below, avahi-daemon can be crashed via a segmentation fault by sending an unsolicited mDNS response containing a recursive CNAME record, where the alias and canonical name point to the same domain (e.g., "h.local" as a CNAME for "h.local"). This causes unbounded recursion in the lookup_handle_cname function, leading to stack exhaustion. The vulnerability affects record browsers where AVAHI_LOOKUP_USE_MULTICAST is set explicitly, which includes record browsers created by resolvers used by nss-mdns. This issue is patched in commit 78eab31128479f06e30beb8c1cbf99dd921e2524, which is part of version 0.9-rc3. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: look at the topmost mount for a mount namespace file
attach_recursive_mnt() preallocates a mountpoint for the root of the
topmost mount of the source so that a mount that already sits at the
destination can be put on top of the source or on top of one of its
propagated copies.
The copies are made without CL_COPY_MNT_NS_FILE so their chain of
overmounts is shorter than the source's. It ends below the first bind
mount of a mount namespace file. So while the loop walks up the chain of
the source it remembers the mountpoint of that mount in "shorter" and
the existing mount is put there for the copies.
But the loop ends at the topmost mount without ever looking at it. If
the topmost mount is the only mount namespace file in the chain
"shorter" stays NULL and mnt_change_mountpoint() attaches the existing
mount of the copy below the root of the mount namespace file. That's a
dentry of nsfs. No path walk in the copy's mount namespace ever gets
there. The mount is gone until its parent goes and the copy that took
its place can't be unmounted synchronously because it has a child:
S bind mount of a file
N bind mount of a mount namespace file on top of S
A shared mount, B a slave of A, Q mounted on B/file
move_mount(S, A/file)
cat B/file -> the content of S instead of Q
umount B/file -> EBUSY
Look at every mount of the chain including the topmost one. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7603: initialize global station WCID
mt7603 uses a driver-private global station WCID for frames that have
neither a station nor a vif, including frames injected through a monitor
interface. Unlike the core global WCID initialized by
mt76_register_device(), this WCID is published without ever being passed
to mt76_wcid_init().
Since commit 0335c034e726 ("wifi: mt76: fix race condition related to
checking tx queue fill status"), mt76_tx() queues every such frame on the
WCID's tx_pending or tx_offchannel queue and links its tx_list. The first
injected frame therefore reaches __skb_queue_tail() with an uninitialized
sk_buff_head and dereferences a NULL prev pointer.
Initialize the WCID before publishing it.
The fix was tested on an MT7603 PCIe device. Three wildcard probe requests
were injected through a monitor interface. The hardware queue head and tail
advanced from 0 to 3 and a second radio captured the third request over the
air. No oops or reset occurred. After restoring AP mode, a 150 MB transfer
also completed without a reset. |
| In the Linux kernel, the following vulnerability has been resolved:
cipso: adjust cached option offsets when removing CIPSO
cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust
cached offsets for options that follow them.
For example, with a valid 10-byte CIPSO option followed by a seven-byte
RR option, parsing records rr at offset 30. Removing CIPSO moves RR to
offset 20, while the cached offset remains 30. Consumers such as
ip_forward_options() and __ip_options_echo() then access the wrong bytes;
the latter may interpret packet data as the option length and copy it into
fixed-size option storage.
Mirror cipso_v4_delopt() and subtract cipso_len from the srr, rr, ts and
router_alert offsets when they follow CIPSO. cipso_len is the distance
the first memmove() shifts those options. The later header move and
network-header reset relocate the bytes and their offset base together. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Handle cpu hotplug race in guarantee_active_cpus()
With commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing
synchronous"), the cpuset hotplug operation becomes synchronous. That
commit also removes the code that handles race between cpuset_hotplug_work
and cpu hotplug notifier with the assumption that race is now gone.
Later commit 7a0aabd9ce69 ("cgroup/cpuset: Always use cpu_active_mask")
updates the cpuset code to always use cpu_active_mask instead of
cpu_online_mask in some places including guarantee_online_cpus() which
is renamed to guarantee_active_cpus() in that commit.
In the case of CPU offline operation, cpu_active_mask is updated
first in sched_cpu_deactivate() to remove the offline CPU before
cpuset_handle_hotplug() is called to update the effective_cpus of the
affected cpusets. The cpu_online_mask is updated after that near the end
of the offline operation to remove the offline CPU. As a result, the race
comes back and the top cpuset may not have any active CPU leading to NULL
pointer dereference during the race window when guarantee_active_cpus()
is called after cpu_active_mask is updated to remove the CPU to be torn
down but before cpuset_handle_hotplug() is able to properly update the
effective_cpus of the top cpuset.
Fix this by adding back the NULL cs check to avoid this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
can: dev: init_can_skb(): restore skb header initialization
Commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure")
removed the skb_reset_mac_header()/skb_reset_network_header()/
skb_reset_transport_header() calls from init_can_skb(). As a result, RX
skbs from alloc_can_skb() and friends again carry mac_header = 0xFFFF.
When such an skb reaches packet_rcv_spkt() (SOCK_PACKET), the push length
calculation overflows and triggers skb_under_panic -> kernel BUG -> full
machine panic.
The same issue was originally reported in 2014 on linux-can and fixed by
commit 969439016d2c ("can: add missing initialisations in CAN related
skbuffs"). packet_rcv_spkt() itself has never been hardened: only
packet_rcv() and tpacket_rcv() gained dev_has_header() checks in
commit d549699048b4 ("net/packet: fix packet receive on L3 devices
without visible hard header"). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode()
When paths_from_inode() fails, scrub_print_warning_inode() jumps to err
without dropping the reference taken by btrfs_get_fs_root(), leaking a
reference to the root every time path resolution fails while printing
scrub warnings. Every other error and success path of the function
drops the reference.
Drop the reference on the paths_from_inode() failure path too. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ati_remote2 - fix type confusion in device attribute handlers
Previously, the channel_mask and mode_mask attributes were registered on
the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b
("Input: ati-remote2 - use driver core to instantiate device
attributes") converted the driver to let the driver core manage them via
dev_groups in struct usb_driver, the attributes moved to the bound
usb_interface devices, but the show and store callbacks were not updated
accordingly.
As a result, the callbacks still invoked to_usb_device() on a device
pointer belonging to a struct usb_interface, producing an invalid
usb_device pointer.
Use to_usb_interface() directly in the attribute handlers to obtain the
interface and its driver data. |
