| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
slip: bound decode() reads against the compressed packet length
slhc_uncompress() parses a VJ-compressed TCP header by advancing a
pointer through the packet via decode() and pull16(). Neither helper
bounds-checks against isize, and decode() masks its return with
& 0xffff so it can never return the -1 that callers test for -- those
error paths are dead code.
A short compressed frame whose change byte requests optional fields
lets decode() read past the end of the packet. The over-read bytes
are folded into the cached cstate and reflected into subsequent
reconstructed packets.
Make decode() and pull16() take the packet end pointer and return -1
when exhausted. Add a bounds check before the TCP-checksum read.
The existing == -1 tests now do what they were always meant to. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: guard option walkers against 1-byte tail reads
When the last byte of options is a non-single-byte option kind, walkers
that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end
of the option area.
Add an explicit i == optlen - 1 check before dereferencing op[i + 1]
in xt_tcpudp and xt_dccp option walkers. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: require a full NFS mode SID before reading mode bits
parse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFS
mode SID and reads sid.sub_auth[2] to recover the mode bits.
That assumes the ACE carries three subauthorities, but compare_sids()
only compares min(a, b) subauthorities. A malicious server can return
an ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which still
matches sid_unix_NFS_mode and then drives the sub_auth[2] read four
bytes past the end of the ACE.
Require num_subauth >= 3 before treating the ACE as an NFS mode SID.
This keeps the fix local to the special-SID mode path without changing
compare_sids() semantics for the rest of cifsacl. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: strictly check for maximum number of actions
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: define and enforce CEPH_MAX_KEY_LEN
When decoding the key, verify that the key material would fit into
a fixed-size buffer in process_auth_done() and generally has a sane
length.
The new CEPH_MAX_KEY_LEN check replaces the existing check for a key
with no key material which is a) not universal since CEPH_CRYPTO_NONE
has to be excluded and b) doesn't provide much value since a smaller
than needed key is just as invalid as no key -- this has to be handled
elsewhere anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.
Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:
- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.
Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: validate release report content before using for RTL8922DE
The commit 957eda596c76
("wifi: rtw89: pci: validate sequence number of TX release report")
does validation on existing chips, which somehow a release report of SKB
becomes malformed. As no clear cause found, add rules ahead for RTL8922DE
to avoid crash if it happens. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/arm-cmn: Reject unsupported hardware configurations
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: validate bsscfg indices in IF events
brcmf_fweh_handle_if_event() validates the firmware-provided interface
index before it touches drvr->iflist[], but it still uses the raw
bsscfgidx field as an array index without a matching range check.
Reject IF events whose bsscfg index does not fit in drvr->iflist[]
before indexing the interface array.
[add missing wifi prefix] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: Check to ensure report responses match the request
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: clear skb2->cb[] in ip4ip6_err()
Oskar Kjos reported the following problem.
ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written
by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes
IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region
as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff
at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr
value. __ip_options_echo() then reads optlen from attacker-controlled
packet data at sptr[rr+1] and copies that many bytes into dopt->__data,
a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE).
To fix this we clear skb2->cb[], as suggested by Oskar Kjos.
Also add minimal IPv4 header validation (version == 4, ihl >= 5). |
| In the Linux kernel, the following vulnerability has been resolved:
Buffer overflow in drivers/xen/sys-hypervisor.c
The build id returned by HYPERVISOR_xen_version(XENVER_build_id) is
neither NUL terminated nor a string.
The first causes a buffer overflow as sprintf in buildid_show will
read and copy till it finds a NUL.
00000000 f4 91 51 f4 dd 38 9e 9d 65 47 52 eb 10 71 db 50 |..Q..8..eGR..q.P|
00000010 b9 a8 01 42 6f 2e 32 |...Bo.2|
00000017
So use a memcpy instead of sprintf to have the correct value:
00000000 f4 91 51 f4 dd 00 9e 9d 65 47 52 eb 10 71 db 50 |..Q.....eGR..q.P|
00000010 b9 a8 01 42 |...B|
00000014
(the above have a hack to embed a zero inside and check it's
returned correctly).
This is XSA-485 / CVE-2026-31786 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs()
sqe->len is __u32 but gets stored into sr->len which is int. When
userspace passes sqe->len values exceeding INT_MAX (e.g. 0xFFFFFFFF),
sr->len overflows to a negative value. This negative value propagates
through the bundle recv/send path:
1. io_recv(): sel.val = sr->len (ssize_t gets -1)
2. io_recv_buf_select(): arg.max_len = sel->val (size_t gets
0xFFFFFFFFFFFFFFFF)
3. io_ring_buffers_peek(): buf->len is not clamped because max_len
is astronomically large
4. iov[].iov_len = 0xFFFFFFFF flows into io_bundle_nbufs()
5. io_bundle_nbufs(): min_t(int, 0xFFFFFFFF, ret) yields -1,
causing ret to increase instead of decrease, creating an
infinite loop that reads past the allocated iov[] array
This results in a slab-out-of-bounds read in io_bundle_nbufs() from
the kmalloc-64 slab, as nbufs increments past the allocated iovec
entries.
BUG: KASAN: slab-out-of-bounds in io_bundle_nbufs+0x128/0x160
Read of size 8 at addr ffff888100ae05c8 by task exp/145
Call Trace:
io_bundle_nbufs+0x128/0x160
io_recv_finish+0x117/0xe20
io_recv+0x2db/0x1160
Fix this by rejecting negative sr->len values early in both
io_sendmsg_prep() and io_recvmsg_prep(). Since sqe->len is __u32,
any value > INT_MAX indicates overflow and is not a valid length. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync
hci_le_big_create_sync() uses DEFINE_FLEX to allocate a
struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17)
BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31)
entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller
hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31,
the memcpy that copies conn->bis into cp->bis writes up to 14 bytes
past the stack buffer, corrupting adjacent stack memory.
This is trivially reproducible: binding an ISO socket with
bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will
eventually trigger hci_le_big_create_sync() from the HCI command
sync worker, causing a KASAN-detectable stack-out-of-bounds write:
BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0
Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71
Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to
HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that
conn->bis can actually carry. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate the whole DACL before rewriting it in cifsacl
build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a
server-supplied dacloffset and then use the incoming ACL to rebuild the
chmod/chown security descriptor.
The original fix only checked that the struct smb_acl header fits before
reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate
header-field OOB read, but the rewrite helpers still walk ACEs based on
pdacl->num_aces with no structural validation of the incoming DACL body.
A malicious server can return a truncated DACL that still contains a
header, claims one or more ACEs, and then drive
replace_sids_and_copy_aces() or set_chmod_dacl() past the validated
extent while they compare or copy attacker-controlled ACEs.
Factor the DACL structural checks into validate_dacl(), extend them to
validate each ACE against the DACL bounds, and use the shared validator
before the chmod/chown rebuild paths. parse_dacl() reuses the same
validator so the read-side parser and write-side rewrite paths agree on
what constitutes a well-formed incoming DACL. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed
When retrieving the PEK CSR, don't attempt to copy the blob to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405
CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pek_csr+0x31f/0x590 ../drivers/crypto/ccp/sev-dev.c:1872
sev_ioctl+0x3a4/0x490 ../drivers/crypto/ccp/sev-dev.c:2562
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed
When retrieving the PDH cert, don't attempt to copy the blobs to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033
CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347
sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| Stack-based buffer overflow in Windows GDI+ allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft XML allows an unauthorized attacker to execute code over a network. |
