| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Reject concurrent BIS listener setup
iso_sock_listen() drops the socket lock before calling iso_listen_bis()
to preserve the hdev->lock ordering. Two concurrent listen() calls on
the same broadcast socket can therefore both observe BT_BOUND. Caller
A can attach connA and release the locks, then caller B can acquire
them and attach connB before A publishes BT_LISTEN.
__iso_chan_add() checks whether connB already has a socket, but not
whether the socket already has a connection. The second attachment
overwrites iso_pi(sk)->conn, leaking the connA reference and leaving
connA->sk intact. Socket teardown follows connB, so later events on
connA can cause a stale socket access.
Recheck BT_BOUND and require iso_pi(sk)->conn to be NULL after taking
both the HCI device and socket locks in iso_listen_bis(). The connection
check also covers the interval between attachment and publication of
BT_LISTEN. Reject a competing setup with -EBADFD through the existing
unlock path before allocating another connection.
A recorded KASAN report from an instrumented kernel shows:
BUG: KASAN: slab-use-after-free in iso_sock_hold+0x119/0x1f0
Call Trace:
iso_sock_hold+0x119/0x1f0
iso_conn_del+0xe4/0x270
hci_disconn_complete_evt+0x351/0x8c0
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
Allocated by task 93:
sk_prot_alloc+0x113/0x220
sk_alloc+0x2b/0x6d0
bt_sock_alloc+0x29/0x370
iso_sock_alloc.constprop.0+0x19/0x300
iso_sock_create+0x94/0x100
Freed by task 93:
kfree+0x121/0x3c0
__sk_destruct+0x42b/0x540
iso_sock_release+0x29d/0x340
__sock_release+0xa1/0x260
sock_close+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: tps6594-regulator: Fix n_linear_ranges for TPS65224 BUCK2-4
The TPS65224 BUCK2, BUCK3 and BUCK4 descriptors pass 4 as
n_linear_ranges, but tps65224_bucks_2_3_4_ranges[] only has two
entries, covering selectors 0x00-0x45.
The linear range helpers loop over n_linear_ranges entries, so any
lookup of a selector above 0x45 reads past the end of the array and
treats whatever follows it as two more ranges. This happens on the
normal registration path when the core checks the voltage constraints
against every selector. TPS652G1 uses the same descriptors and is
affected too.
Use ARRAY_SIZE() so the count always matches the table. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: ltc3676: don't read the write-only HRST and CLIRQ registers
HRST (0x1e) and CLIRQ (0x1f) are write-only command strobes. Writing HRST
triggers a hard reset of the chip and writing CLIRQ clears the interrupt;
reading them returns nothing useful, and the read itself fires the command.
The result is that a plain register dump resets the board:
cat /sys/kernel/debug/regmap/2-003c/registers
walks every readable register, hits HRST, and the board reboots.
Split the callback back in two so HRST and CLIRQ stay writable but are no
longer readable. The readable range is left unchanged
(LTC3676_BUCK1 ... LTC3676_IRQSTAT). |
| In the Linux kernel, the following vulnerability has been resolved:
power: sequencing: pcie-m2: Fix leaking array from of_regulator_bulk_get_all()
of_regulator_bulk_get_all() allocates the consumers array and hands it to
the caller, who is expected to free it at an appropriate time.
pwrseq-pcie-m2.c never did, leading to a memory leak.
Add an explicit kfree() for the consumers array. |
| In the Linux kernel, the following vulnerability has been resolved:
optee: register TEE devices only once fully initialized
optee_probe() called tee_device_register() on both the client and the
supplicant device before the rest of struct optee had been initialized.
tee_device_register() calls cdev_device_add(), which does two things at
once: it creates /dev/tee0 and /dev/teepriv0, and it links the device
into the tee class so that class_find_device() can find it. From that
moment on the device is reachable both from user space via tee_open()
and from kernel space via tee_client_open_context(). The only gate in
teedev_open() is tee_device_get(), which merely checks that
teedev->desc is non-NULL, which was already set by tee_device_alloc().
Therefore, there is effectively no gate at all.
A context opened in that window can run against a struct optee where
- optee->call_queue.mutex is not initialized by optee_cq_init()
- optee->supp mutex and completions is not initialized by
optee_supp_init()
- optee->rpmb_dev_mutex is not initialized yet,
- the message argument cache is not initialized by
optee_shm_arg_cache_init()
- optee->ctx is still NULL
Any open session or invoke during this window takes uninitialized
mutexes and dereferences a NULL pointer.
Fix it by moving both tee_device_register() calls down to the point
where all of struct optee is set up.
[JW: adding fixes and cc] |
| Use after free in Windows Installer allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Out-of-bounds read in Microsoft Office PowerPoint allows an unauthorized attacker to disclose information over a network. |
| The FluentCart A New Era of eCommerce – Faster, Lighter, and Simpler plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.7.0 via the 'order_id + billing_address_id (also shipping_address_id)' parameter due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to read and exfiltrate another customer's stored billing and shipping address PII — including street address, city, state, postcode, phone number, company name, VAT number, and legal registration ID — by enumerating sequential AUTO_INCREMENT order and address ID pairs. The id-equality guard intended to restrict address reuse is bypassed because the attacker controls both halves of the compared pair, and the unauthenticated AJAX entry point imposes only a soft rate limit of 5 requests per 60 seconds rather than any authentication or ownership check. |
| IBM MQ could allow a remote attacker with queue manager control or man-in-the-middle access on unencrypted channels to cause a denial of service in client applications using asynchronous message consumption due to improper validation of queue name length values. |
| Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB contains a spreadsheet formula injection vulnerability in the part import/export workflow. An authenticated user with permission to import parts can import a CSV file containing formula-prefixed values, such as =1+1, into user-controlled part fields. When the affected part is later exported as an XLSX spreadsheet, Part-DB writes the attacker-controlled value using PhpSpreadsheet's setCellValue() method without neutralising spreadsheet formula characters. As a result, the exported XLSX file contains an executable spreadsheet formula cell rather than a plain text value. If another user exports and opens the spreadsheet, the formula may be evaluated by their spreadsheet software. This issue has been patched in version 2.13.2. |
| pghoard is a PostgreSQL backup daemon and restore tooling that stores backup data in cloud object stores. Prior to version 2.7.2, an incomplete path traversal fix in pghoard allows an attacker with write access to the backup object storage (such as S3, GCS, or Azure) to execute arbitrary file writes and directory creation outside the designated PostgreSQL data directory (pgdata). When a database administrator executes a restore operation (via pghoard_restore get-basebackup), a maliciously crafted delta backup manifest with path traversal sequences (e.g., ../../../../etc/cron.d/backdoor) will write arbitrary payloads to the host system. This issue has been patched in version 2.7.2. |
| Entire CLI hooks into Git workflows to capture AI agent sessions. Prior to version 0.7.7, a path traversal vulnerability in Entire CLI allows an attacker with push access to the checkpoints repository to craft malicious checkpoint metadata that causes entire session resume or entire checkpoint rewind to write attacker-controlled transcript data outside of the expected session directory. The issue occurs because checkpoint metadata is fetched from the remote entire/checkpoints/v1 branch and the SessionID field was used to construct filesystem paths without validation in the restore path. A malicious SessionID containing absolute paths or path traversal sequences could cause arbitrary files on the victim’s machine to be overwritten. This issue has been patched in version 0.7.7. |
| PraisonAI is a multi-agent teams system. From version 0.1.4 to before version 0.1.5 in praisonai-platform, a workspace member can permanently delete any resource — projects, agents, issues, labels, issue dependencies, and issue-label attachments — created by the workspace owner or other members. All six content DELETE endpoints enforce workspace membership but perform no ownership or role check. A single malicious or compromised member account can wipe an entire workspace's content irreversibly. This issue has been patched in version 0.1.5. |
| PraisonAI is a multi-agent teams system. From version 2.6.0 to before version 4.6.59, PraisonAI's template loader accepts GitHub template URIs with refs, for example github:owner/repo/template@v1.0.0. The resolver stores the user-controlled template path and ref verbatim, and the cache layer later joins those values into ~/.praison/cache/templates/github/<owner>/<repo>/<template>/<ref> without normalizing each segment or checking that the final path remains inside the template cache root. A crafted ref such as ../../../../../../outside-delete-target therefore escapes the cache directory. The first load can write .cache_meta.json outside the cache. If the normal cache hierarchy for the same owner/repo/template has already been created, the same path reaches shutil.rmtree(cache_path) and removes an attacker-selected outside directory before replacing it with cache metadata. This issue has been patched in version 4.6.59. |
| XDG Desktop Portal is a desktop integration portal. Prior to version 1.22.1, malicious sandboxed applications can use the FileTransfer.RetrieveFiles method to redirect drag-and-drop and copy-paste data targeted at other applications to itself. Some portals generate tokens which provide access to resources. The sharing of the token transfers access to the resource and is supposed to happen out of band. The tokens were generated with g_random_int or g_uuid_string_random, both of which use GLib's GRand based on the Mersenne Twister PRNG which created a stream of reproducible random numbers. By generating enough tokens, the state of the GRand can be recover and with it, the next tokens can be predictedinsufin. This issue has been patched in version 1.22.1. |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 25.01 to before version 26.05, AuthenticationEndpoint.verifyOpenIdToken builds its verifier as JWT.require(algorithm).withIssuer(issuer).build() and does not enforce the aud claim during cryptographic validation. The aud check is performed manually afterwards via a single string-equality call, which only handles single-string aud values. In a multi-RP IdP setup, a token whose single-string aud matches the viewer's client ID but was issued for a different relying party passes the check and authenticates the attacker as the token's sub. This issue has been patched in version 26.05. |
| Part-DB is an open source inventory management system for electronic components. Prior to version 2.12.1, LogEntryExtraFormatter builds the HTML shown in the "Extra" column of the activity-log table (/log) and in element history tables. Every branch of LogEntryExtraFormatter::getInternalFormat() runs user-controlled strings through htmlspecialchars() before placing them into the HTML it returns — except the CollectionElementDeleted branch, which interpolates getOldName() (and getCollectionName()) into a sprintf() template with no escaping. The returned string is emitted by LogEntryExtraColumn::render() and inserted as raw HTML into the DataTables cell (the bundle does not escape column output; sibling columns call htmlspecialchars() themselves). CollectionElementDeleted.getOldName() is the name of a deleted collection sub-element — a part Parameter, Attachment, PartLot, Orderdetail, etc. — all freely set by any user with edit rights on the owning element. A low-privileged content editor can therefore store an HTML/script payload as the name of such a sub-element, delete it (which writes the log entry), and have that markup parsed as live DOM in the browser of a higher-privileged victim (an administrator/auditor with system.show_logs, or any user viewing that element's history). This is a stored cross-site-scripting / HTML-injection defect caused by a single missed sanitizer in one sibling branch. CSP policies block inline javascript execution under normal conditions. This issue has been patched in version 2.12.1. |
| AgenticSeek before commit 409840c contains a remote code execution vulnerability because llm_server/app.py hardcodes Flask debug mode while binding to all interfaces. Attackers who reach the server port and obtain the derivable Werkzeug debugger PIN can execute Python code and operating system commands with llm_server privileges. |
| A flaw was found in libslirp. When handling ICMP echo requests, the reply length is not updated to match the actual data received from the host. Under specific conditions where the normal ICMP socket is unavailable, this length mismatch causes the host's real IP address to be leaked to the guest in the echo reply, breaking the NAT isolation that user-mode networking is expected to provide. |
