| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: always dissect GSO packets in __virtio_net_hdr_to_skb()
Commit 9e8db5913264 ("net: avoid false positives in untrusted gso
validation") added a '&& skb->network_header' check before flow-dissecting
GSO packets without VIRTIO_NET_HDR_F_NEEDS_CSUM in
__virtio_net_hdr_to_skb(), because some callers (such as tun_get_user(),
tun_xdp_one(), virtnet_receive_done(), and raw_verify_header()) called
virtio_net_hdr_*_to_skb() before initializing skb->network_header and
skb->dev.
Because __alloc_skb() and __build_skb_around() zero-initialize
skb->network_header to 0 (unlike mac_header and transport_header which
are initialized to ~0U), those four callers always had
skb->network_header == 0 and bypassed flow dissection in
__virtio_net_hdr_to_skb(). More generally, skb->network_header is an
offset from skb->head (where 0 is also a valid offset whenever
skb_headroom(skb) is 0), not a boolean flag.
Whenever the 'if (gso_type && skb->network_header)' branch was skipped,
the fallback 'else if (gso_type)' only pulled nh_min_len + thlen (40 bytes
for TCPv4) without dissecting the packet, without validating ip_proto or
n_proto, and without setting skb->transport_header.
If the packet has a malformed network header, it is not rejected and a
subsequent skb_probe_transport_header() also fails, leaving
skb->transport_header at ~0U (0xffff). Similarly, if an IPv4 packet
carries IP options (ihl > 5) or an IPv6 packet carries extension headers,
pulling only nh_min_len + thlen can leave the TCP header outside
skb->head. In both cases, tcp_hdrlen(skb) in skb_gso_transport_seglen()
reads out-of-bounds:
BUG: KASAN: slab-out-of-bounds in skb_gso_transport_seglen
Read of size 2 by task poc/133
skb_gso_transport_seglen (net/core/gso.c:155)
skb_gso_validate_mac_len (net/core/gso.c:270)
tbf_enqueue (net/sched/sch_tbf.c:260)
dev_qdisc_enqueue (net/core/dev.c:4227)
__dev_queue_xmit (net/core/dev.c:4884)
In addition, checking virtio_net_hdr_match_proto() only inside
'if (!skb->protocol)' before flow dissection both skipped validation when
skb->protocol was pre-set by the caller and rejected VLAN-tagged frames
whose outer L2 protocol is ETH_P_8021Q or ETH_P_8021AD.
Fix this by:
1. Initializing skb->dev and skb->network_header (plus skb->protocol for
IFF_TUN) before virtio_net_hdr_*_to_skb() in tun_get_user(),
tun_xdp_one(), virtnet_receive_done(), and raw_verify_header(). In
tun_get_user(), drop the redundant skb_reset_mac_header(skb) in the
IFF_TUN case since __virtio_net_hdr_to_skb() unconditionally resets
mac_header.
2. Removing '&& skb->network_header' and the unvalidated
'else if (gso_type)' fallback in __virtio_net_hdr_to_skb() so all GSO
packets without VIRTIO_NET_HDR_F_NEEDS_CSUM are flow-dissected, have
their transport header pulled into linear data, and have
skb->transport_header set.
3. Moving the virtio_net_hdr_match_proto() check to after
skb_flow_dissect_flow_keys_basic(), validating keys.basic.n_proto
against hdr_gso_type. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix devlink_rel reference leak when notify work is pending
devlink_rel_nested_in_notify_work_schedule() takes a reference on the
devlink_rel for the notify work and then queues the work, ignoring the
return value of schedule_delayed_work(). If the work is already pending,
nothing new is queued, the work runs only once and drops only one
reference, so the extra one is leaked together with the devlink_rel and
its index in devlink_rels.
This is easy to hit. devl_register() of a nested instance queues the
work, and if the instance is unregistered before the work has run,
devlink_rel_put() queues it again while it is still pending. The work
also keeps rescheduling itself for as long as the parent devlink lock
cannot be taken, which widens the window. Registering and unregistering
a nested devlink instance 100 times while holding the parent lock leaks
all 100 devlink_rel objects.
The reschedule path in devlink_rel_nested_in_notify_work() has the same
problem: if the work was queued again while it was running, the
reference it holds is never dropped.
Drop the reference in both places when the work was already pending.
The pending work holds its own reference, so this can not be the last
one. |
| In the Linux kernel, the following vulnerability has been resolved:
pfcp: make sure the SEID is linear before reading it
pfcp_encap_recv() only makes sure that the UDP header and the 4 byte
PFCP header are in the linear area. When the S flag is set,
pfcp_session_recv() then reads the 8 byte SEID that follows, which is
not covered by the pskb_may_pull() check.
A short PFCP packet with the S flag set, or one whose session header
lies in a fragment, therefore makes pfcp_session_recv() read beyond the
end of the packet data, and whatever it finds there is stored in the
tunnel metadata that flower later classifies on.
Pull up to the end of the SEID before reading it, and drop packets
that are too short to contain it. Reload the header pointer afterwards
since pskb_may_pull() may reallocate the skb head.
Use offsetofend() rather than sizeof(struct pfcphdr_session): the
structure is not packed, so its size is 16 bytes because of the
alignment of the __be64 member, while the header on the wire is only 12
bytes, and valid session messages would be dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Fix memory leak in vmci_transport_recv_dgram_cb()
During the closure of a datagram socket, the vmci_transport_recv_dgram_cb()
function may be called, which will add the packets
to the socket's backlog; then, after the receive queue is cleared,
the __release_sock() function will move the packet back from the socket's
backlog to the receive queue, which will lead to a memory leak.
sock_close
__sock_release
__vsock_release
// take ownership by user-space
lock_sock_nested
sock_set_flag(sk, SOCK_DEAD)
vmci_transport_release
vmci_dispatch_dgs
vmci_datagram_invoke_guest_handler
vmci_transport_recv_dgram_cb
sk_receive_skb
if (!sock_owned_by_user(sk))
[...]
(!) else if sk_add_backlog()
[...]
(!) skb_queue_purge(&sk->sk_receive_queue)
release_sock
__release_sock
// move all packets from the backlog
// to the receive queue
(!) sk_backlog_rcv
vsock_queue_rcv_skb
[...]
__sock_queue_rcv_skb
if (!sock_flag(sk, SOCK_DEAD))
// Since the socket is "dead", the function will not
// be called
sk->sk_data_ready(sk)
sock_release_ownership(sk);
sock_put
Add a receive queue cleanup in the socket destructor to fix this.
syzkaller report:
unreferenced object 0xffff8880117bfb80 (size 240):
comm "irq/56-vmw_vmci", pid 205, jiffies 4295064448 (age 73.992s)
hex dump (first 32 bytes):
78 dc 26 1e 80 88 ff ff 78 dc 26 1e 80 88 ff ff x.&.....x.&.....
00 00 00 00 00 00 00 00 c0 da 26 1e 80 88 ff ff ..........&.....
backtrace:
[<ffffffff82be8d97>] __alloc_skb+0x287/0x330 net/core/skbuff.c:505
[<ffffffffa114bcbd>] vmci_transport_recv_dgram_cb+0xbd/0x210 [vmw_vsock_vmci_transport]
[<ffffffffa05072c6>] vmci_datagram_invoke_guest_handler+0x366/0x450 [vmw_vmci]
[<ffffffffa050ad75>] vmci_dispatch_dgs+0x235/0x490 [vmw_vmci]
[<ffffffffa050b025>] vmci_interrupt+0x55/0x290 [vmw_vmci]
[<ffffffff8137ad2b>] irq_thread_fn+0x8b/0x1a0 kernel/irq/manage.c:1205
[<ffffffff8137c7ae>] irq_thread+0x28e/0x530 kernel/irq/manage.c:1314
[<ffffffff81253dd6>] kthread+0x2e6/0x3a0 kernel/kthread.c:376
[<ffffffff81004392>] ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:295
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Refactor registration
This refactors and simplifies the registration/unregistration flow. Since
we now only perform registration when the client isn't opened anymore, the
logic for handling that can be removed, and the rest of the function
streamlined.
We also remove the previous assumption that we have a serial number to show
we're registered, replacing it with a single purpose boolean.
In a previous refactor the code for unregistering a battery if later
registration steps failed was accidentally left out. As a result, a
lingering power_supply object could get left over after the steam object
was torn down. This is also fixed here. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Clean up locking
This cleans up several issues with locking behavior, including RCU accesses
not being guarded behind a lock. |
| IBM App Connect Enterprise 13.0.1.0 through 13.0.8.2 could allow a remote attacker to obtain sensitive information due to binding to an unrestricted IP address. |
| NoMachine Redis Improper Authentication Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of NoMachine. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
The specific flaw exists within the authentication mechanism controlling access to the Redis database. The issue results from using insufficient entropy in the generation of credentials. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the service account. Was ZDI-CAN-30984. |
| NoMachine mDNS Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NoMachine. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the parsing of mDNS resource records. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-30982. |
| GIMP APNG File Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of APNG files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29400. |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via T3, IIOP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Essbase. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Essbase. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in Oracle Essbase (component: Essbase Web Platform). The supported version that is affected is 21.8.3.0.0. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Essbase. CVSS 3.1 Base Score 8.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via TCP to compromise Oracle Essbase. Successful attacks of this vulnerability can result in takeover of Oracle Essbase. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Essbase. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via T3, IIOP to compromise Oracle Essbase. Successful attacks of this vulnerability can result in takeover of Oracle Essbase. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the JD Edwards EnterpriseOne Orchestrator product of Oracle JD Edwards (component: E1 IOT Orchestrator Security). Supported versions that are affected are 9.2.0.0-9.2.26.5. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise JD Edwards EnterpriseOne Orchestrator. While the vulnerability is in JD Edwards EnterpriseOne Orchestrator, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of JD Edwards EnterpriseOne Orchestrator. CVSS 3.1 Base Score 10.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in Oracle GoldenGate (component: Admin Server Executable). Supported versions that are affected are 19.1.0.0.0-19.32.0.0, 21.3-21.23 and 23.4-23.26.3.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTPS to compromise Oracle GoldenGate. Successful attacks of this vulnerability can result in takeover of Oracle GoldenGate. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| IBM Guardium Data Protection 12.1, and 12.2 could allow a remote attacker to obtain sensitive information due to use of a hard-coded cryptographic key. |
| IBM Planning Analytics 2.0 and 2.1 are vulnerable to a stack-based buffer overflow, caused by improper bounds checking. An attacker could overflow the buffer and execute arbitrary code on the system. |
