| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in Undertow, where URL-encoded request paths can be mishandled during concurrent requests on the AJP listener. This issue arises because the same buffer is used to decode the paths for multiple requests simultaneously, leading to incorrect path information being processed. As a result, the server may attempt to access the wrong path, causing errors such as "404 Not Found" or other application failures. This flaw can potentially lead to a denial of service, as legitimate resources become inaccessible due to the path mix-up. |
| In the Bentley ALIM Web application, certain configuration settings can cause exposure of a user's ALIM session token when the user attempts to download files. This is fixed in Assetwise ALIM Web 23.00.04.04 and Assetwise Information Integrity Server 23.00.02.03. |
| An issue was discovered in OPC cardsystems Webapp Aufwertung 2.1.0. The reference assigned to transactions can be reused. When completing a payment, the first or all transactions with the same reference are completed, depending on timing. This can be used to transfer more money onto employee cards than is paid. |
| A flaw was found in the gnome-remote-desktop package. The gnome-remote-desktop system daemon performs inadequate validation of session agents using D-Bus methods related to transitioning a client connection from the login screen to the user session. As a result, the system RDP TLS certificate and key can be exposed to unauthorized users. This flaw allows a malicious user on the system to take control of the RDP client connection during the login screen-to-user session transition. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix krb5 mount with username option
Customer reported that some of their krb5 mounts were failing against
a single server as the client was trying to mount the shares with
wrong credentials. It turned out the client was reusing SMB session
from first mount to try mounting the other shares, even though a
different username= option had been specified to the other mounts.
By using username mount option along with sec=krb5 to search for
principals from keytab is supported by cifs.upcall(8) since
cifs-utils-4.8. So fix this by matching username mount option in
match_session() even with Kerberos.
For example, the second mount below should fail with -ENOKEY as there
is no 'foobar' principal in keytab (/etc/krb5.keytab). The client
ends up reusing SMB session from first mount to perform the second
one, which is wrong.
```
$ ktutil
ktutil: add_entry -password -p testuser -k 1 -e aes256-cts
Password for testuser@ZELDA.TEST:
ktutil: write_kt /etc/krb5.keytab
ktutil: quit
$ klist -ke
Keytab name: FILE:/etc/krb5.keytab
KVNO Principal
---- ----------------------------------------------------------------
1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96)
$ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser
$ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar
$ mount -t cifs | grep -Po 'username=\K\w+'
testuser
testuser
``` |
| Fleet is open source device management software. Prior to 4.81.1, a vulnerability in Fleet's Windows MDM command processing allows a malicious enrolled device to access MDM commands intended for other devices, potentially exposing sensitive configuration data such as WiFi credentials, VPN secrets, and certificate payloads across the entire Windows fleet. Version 4.81.1 patches the issue. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. The nats-server provides an MQTT client interface. Prior to versions 2.11.15 and 2.12.5, Sessions and Messages can by hijacked via MQTT Client ID malfeasance. Versions 2.11.15 and 2.12.5 patch the issue. No known workarounds are available. |
| Excessive caching of authentication context in Neo4j Enterprise edition versions prior to 2026.01.4 leads to authenticated users inheriting the context of the first user who authenticated after restart. The issue is limited to certain non-default configurations of SSO (UserInfo endpoint).
We recommend upgrading to versions 2026.01.4 (or 5.26.22) where the issue is fixed. |
| If two sibling jails are restricted to separate filesystem trees, which is to say that neither of the two jail root directories is an ancestor of the other, jailed processes may nonetheless be able to access a shared directory via a nullfs mount, if the administrator has configured one.
In this case, cooperating processes in the two jails may establish a connection using a unix domain socket and exchange directory descriptors with each other.
When performing a filesystem name lookup, at each step of the lookup, the kernel checks whether the lookup would descend below the jail root of the current process. If the jail root directory is not encountered, the lookup continues.
In a configuration where processes in two different jails are able to exchange file descriptors using a unix domain socket, it is possible for a jailed process to receive a directory for a descriptor that is below that process' jail root. This enables full filesystem access for a jailed process, breaking the chroot.
Note that the system administrator is still responsible for ensuring that an unprivileged user on the jail host is not able to pass directory descriptors to a jailed process, even in a patched kernel. |
| Element Android is an Android Matrix Client provided by Element. Element Android up to version 1.6.32 can, under certain circumstances, fail to logout the user if they input the wrong PIN more than the configured amount of times. An attacker with physical access to a device can exploit this to guess the PIN. Version 1.6.34 solves the issue. |
| A vulnerability was found in pgadmin. Users logging into pgAdmin running in server mode using LDAP authentication may be attached to another user's session if multiple connection attempts occur simultaneously. |
| Flask is a lightweight WSGI web application framework. When all of the following conditions are met, a response containing data intended for one client may be cached and subsequently sent by the proxy to other clients. If the proxy also caches `Set-Cookie` headers, it may send one client's `session` cookie to other clients. The severity depends on the application's use of the session and the proxy's behavior regarding cookies. The risk depends on all these conditions being met.
1. The application must be hosted behind a caching proxy that does not strip cookies or ignore responses with cookies.
2. The application sets `session.permanent = True`
3. The application does not access or modify the session at any point during a request.
4. `SESSION_REFRESH_EACH_REQUEST` enabled (the default).
5. The application does not set a `Cache-Control` header to indicate that a page is private or should not be cached.
This happens because vulnerable versions of Flask only set the `Vary: Cookie` header when the session is accessed or modified, not when it is refreshed (re-sent to update the expiration) without being accessed or modified. This issue has been fixed in versions 2.3.2 and 2.2.5. |
| Exposure of data element to wrong session in the Intel DCM software before version 5.0.1 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| This vulnerability potentially allows unauthorized enumeration of information from the embedded device APIs. An attacker must already have existing knowledge of some combination of valid usernames, device names and an internal system key. For such an attack to be successful the system must be in a specific runtime state. |
| Deno is a JavaScript, TypeScript, and WebAssembly runtime. Starting in version 1.35.1 and prior to version 1.36.3, a vulnerability in Deno's Node.js compatibility runtime allows for cross-session data contamination during simultaneous asynchronous reads from Node.js streams sourced from sockets or files. The issue arises from the re-use of a global buffer (BUF) in stream_wrap.ts used as a performance optimization to limit allocations during these asynchronous read operations. This can lead to data intended for one session being received by another session, potentially resulting in data corruption and unexpected behavior. This affects all users of Deno that use the node.js compatibility layer for network communication or other streams, including packages that may require node.js libraries indirectly. Version 1.36.3 contains a patch for this issue.
|
| trunk.cocoapods.org is the authentication server for the CoacoaPods dependency manager. Prior to commit d4fa66f49cedab449af9a56a21ab40697b9f7b97, the trunk sessions verification step could be manipulated for owner session hijacking Compromising a victim’s session will result in a full takeover of the CocoaPods trunk account. The threat actor could manipulate their pod specifications, disrupt the distribution of legitimate libraries, or cause widespread disruption within the CocoaPods ecosystem. This was patched server-side with commit d4fa66f49cedab449af9a56a21ab40697b9f7b97 in October 2023. |
| In version v0.3.8 of open-webui/open-webui, a vulnerability exists where a token is returned when a user with a pending role logs in. This allows the user to perform actions without admin confirmation, bypassing the intended approval process. |
| A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.1), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.1), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.1), SCALANCE M812-1 ADSL-Router family (All versions < V8.1), SCALANCE M816-1 ADSL-Router family (All versions < V8.1), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.1), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.1), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.1), SCALANCE M874-3 3G-Router (CN) (6GK5874-3AA00-2FA2) (All versions < V8.1), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.1), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.1), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.1), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.1), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.1), SCALANCE MUM853-1 (A1) (6GK5853-2EA10-2AA1) (All versions < V8.1), SCALANCE MUM853-1 (B1) (6GK5853-2EA10-2BA1) (All versions < V8.1), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.1), SCALANCE MUM856-1 (A1) (6GK5856-2EA10-3AA1) (All versions < V8.1), SCALANCE MUM856-1 (B1) (6GK5856-2EA10-3BA1) (All versions < V8.1), SCALANCE MUM856-1 (CN) (6GK5856-2EA00-3FA1) (All versions < V8.1), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.1), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.1), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.1), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.1). Affected devices do not properly enforce isolation between user sessions in their web server component. This could allow an authenticated remote attacker to escalate their privileges on the devices. |
