| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| As an inadvertent side effect of an unrelated code change, PRIV_KTRACE was always denied to a jailed root user. Tracing configured by a jailed root user was therefore not flagged as privileged.
An unprivileged user in a jail that has permission to debug the target process can modify the jailed root user's ktrace(2) flags, or disable tracing outright. A jailed root user therefore cannot reliably trace unprivileged processes. |
| After dispatching a decrypt operation to OCF and receiving the result, the wg(4) driver failed to check whether the MAC verification step succeeded. The driver thus silently accepted packets with an invalid Poly1305 authentication tag.
A remote attacker who can send UDP packets to a WireGuard endpoint, and who can guess the bounds of the receiver's replay window, can inject forged or modified transport data packets into the tunnel.
A remote attacker who can intercept WireGuard packets bound for a FreeBSD host can modify the ciphertext and authenticated data without detection by the receiver. |
| To retrieve the previous timer value, the kernel calls realtimer_gettime(), which obtains the current time for the timer's clock. For a timer using CLOCK_TAI this can fail when no TAI offset has been configured, but the error return was not checked, so the uninitialized output buffer was copied to userspace.
An unprivileged local user can obtain uninitialized kernel stack memory by creating a POSIX timer with CLOCK_TAI and calling timer_settime(2), potentially disclosing sensitive kernel data. |
| The GETALL and SETALL commands in semctl(2) recorded the number of semaphores in the target set, dropped the lock protecting the set, allocated a buffer sized for that count, and reacquired the lock. A sequence-number check was used to verify that the set had not been replaced in the interim, but the sequence number wraps after 0x8000 create/destroy cycles. By rapidly destroying and recreating semaphore sets at the same index, another process can cause the sequence number to wrap, allowing a set with a different number of semaphores to pass validation. The subsequent copy then reads or writes past the end of the allocated buffer.
An unprivileged local user can trigger out-of-bounds reads and writes on kernel heap memory, potentially leading to privilege escalation. |
| The ELF core dump code counted the number of dumpable VM map entries, allocated a buffer for the corresponding program headers, then iterated over the map a second time to populate them. A process sharing the address space via rfork(2) can mutate the map between the two passes, causing the second pass to write program headers past the end of the buffer.
An unprivileged local user sharing an address space with a process that dumps core can trigger an out-of-bounds write on the kernel heap, potentially leading to privilege escalation. |
| The CONS_HISTORY ioctl handler did not adequately validate the requested history size. A large value caused an integer overflow in the buffer size calculation, resulting in a heap allocation smaller than expected. Subsequent initialization of the buffer wrote beyond the end of the allocation.
An unprivileged local user with access to a vt(4) device can trigger an out-of-bounds write in the kernel, potentially escalating privileges. |
| dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). |
| sigqueue(2) was marked as permitted in capability mode with the introduction of Capsicum in 2011, but the implementation of kern_sigqueue did not include a capability mode check restricting signal delivery to the calling process's own PID.
A process in capability mode can use sigqueue(2) to send signals to any process it could signal following standard Unix permissions, bypassing the Capsicum sandbox restriction. A compromised sandboxed process could interfere with other processes, for example by sending SIGKILL or SIGSTOP. This could be any process running as the same user, or any process, for a superuser sandboxed process. |
| The kernel handler for IPV6_MSFILTER dropped a serializing lock in order to copy the source-filter list from userspace, then reacquired the lock. During this window another thread could free the multicast filter structure, leaving the handler with a stale pointer to freed memory.
An unprivileged local user can exploit this use-after-free to escalate privileges. |
| The Linuxulator determined whether a binary was set-user-ID or set-group-ID by checking the P_SUGID process flag. During execve(2), this flag is not yet set at the point where the auxiliary vector is constructed, so AT_SECURE was incorrectly set to zero for set-user-ID and set-group-ID executables.
An unprivileged local user can inject a shared library via LD_PRELOAD into a set-user-ID or set-group-ID Linux binary, gaining the privileges of that binary. |
| The ELF image activator cleared per-process ASLR preference flags for setuid binaries after the code that computes the PIE base address, rather than before. As a result, a user-requested ASLR disable was still in effect at the point where the base address was chosen.
An unprivileged local user can disable ASLR for a setuid PIE binary by calling procctl(2) before execve(2). This makes exploitation of any separate memory corruption vulnerability in that binary significantly easier. |
| Second, the audio buffer backing a mapping could be freed when the device was closed even though the mapping remained valid. The freed memory could then be reused elsewhere while still accessible through the stale mapping.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). |
| When used to deliver a signal to a specific thread, thr_kill2(2) called p_cansignal() to determine whether the operation was permitted but did not check the result before delivering the signal. The signal was sent even when the permission check failed. The system call returned the resulting error to the caller, but by then the signal had already been delivered.
The missing check allows an unprivileged local user who knows or can guess a target's process and thread IDs to send any signal to a process they would not normally be permitted to signal, including processes owned by other users or by root. The same check enforces jail boundaries, so a jailed process can signal processes on the host or in other jails. Thread IDs are allocated globally and sequentially, and so can be discovered by brute force with no visibility into the target.
An attacker can stop or terminate arbitrary processes, including critical system daemons, resulting in a Denial of Service (DoS). |
| The KTLS receive path decrypted each record in place, assuming that the mbufs holding received data were anonymous and safe to modify. This assumption does not hold for data placed on a socket by sendfile(2), which can reference file-backed memory directly through non-anonymous M_EXTPG pages or EXT_SFBUF mbufs. When the sender transmits such data over a loopback connection without enabling KTLS on the transmit side, the file-backed mbufs reach the receiver's decryption path unchanged. Decrypting a record in place then overwrites the backing file's page cache instead of a private copy of the data.
An unprivileged local user who can read a file can overwrite its contents with data of their choosing by sending the file over a loopback connection on which they have enabled KTLS receive. The write modifies the page cache directly, so it bypasses file flags such as schg and is written back to disk. By overwriting a setuid binary or other trusted file, a local user can escalate privileges, potentially gaining full control of the affected system. |
| The setcred(2) system call is only available to privileged users. However, before the privilege level of the caller is checked, the user-supplied list of supplementary groups is copied into a fixed-size kernel stack buffer without first validating its length. If the supplied list exceeds the capacity of that buffer, a stack buffer overflow occurs.
Because the bounds check on the supplementary groups list occurs after the kernel stack buffer has already been written, an unprivileged local user may trigger the overflow without holding any special privilege. Successful exploitation may allow an attacker to execute arbitrary code in the context of the kernel, allowing an unprivileged local user to gain elevated privileges on the affected system. |
| libcasper(3) communicates with helper processes via UNIX domain sockets, and uses the select(2) system call to wait for data to become available. However, it does not verify that its socket descriptor fits within select(2)'s descriptor set size limit of FD_SETSIZE (1024).
An attacker able to cause an application using libcasper(3) to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, may trigger stack corruption. If the target application runs with setuid root privileges, this could be used to escalate local privileges. |
| A file descriptor can be closed while a thread is blocked in a poll(2) or select(2) call waiting for that descriptor. Because the blocked thread does not hold a reference to the underlying object, this closure may result in the object being freed while the thread remains blocked. In this situation, the kernel must remove the blocked thread from the per-object wait queue prior to freeing the object.
In the case of some file descriptor types, the kernel failed to unlink blocked threads from the object before freeing it. When the blocked thread is subsequently woken, it accesses memory that has already been freed resulting in a use-after-free vulnerability.
The use-after-free vulnerability may be triggered by an unprivileged local user and can be exploited to obtain superuser privileges. |
| When a fusefs file system implements extended attributes, the kernel may send a FUSE_LISTXATTR message to the userspace daemon to retrieve the list of extended attributes for a given file. The FUSE protocol requires the daemon to return a packed list of NUL-terminated strings. The fusefs kernel module calls strlen() on this daemon-supplied buffer without first verifying that the entire list is NUL-terminated.
If a malicious daemon sends a non-NUL-terminated list, the fusefs kernel module may read beyond the end of one heap-allocated buffer and potentially write beyond the end of a second buffer. A malicious daemon could disclose up to 253 bytes of kernel heap memory, or it could inject up to 250 attacker-controlled bytes into unallocated kernel heap space. |
| ptrace(PT_SC_REMOTE) failed to properly validate parameters for the syscall(2) and __syscall(2) meta-system calls. As a result, a user with the ability to debug a process may trigger arbitrary code execution in the kernel, even if the target process has no special privileges.
The missing validation allows an unprivileged local user to escalate privileges, potentially gaining full control of the affected system. |
| In the case of the cap_net service, when a key present in the old limit was omitted from the new limit, the missing key was treated as "allow any" instead of being rejected.
In certain scenarios, an application that had previously restricted a subset of network operations could ask for a new limit that extended the permissions of the process. |
