| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: clear CALLBACK_RUNNING on failed delegation recall queue
nfsd_break_one_deleg() sets NFSD4_CALLBACK_RUNNING via test_and_set_bit
at entry to serialize recall work, then calls nfsd4_run_cb() to queue
the recall. When the queue attempt fails the refcount bump is undone,
but the RUNNING bit is left set. The only site that clears the bit is
nfsd41_destroy_cb() (fs/nfsd/nfs4callback.c), which runs from the
workqueue and is therefore unreachable when nothing was queued.
The bit becomes a permanent latch on dp->dl_recall.cb_flags: every
subsequent break_lease() on the same delegation hits the early-return
guard in nfsd_break_one_deleg() and silently skips the recall, so the
delegation is never broken and the conflicting open or lock stalls.
Fix by clearing NFSD4_CALLBACK_RUNNING on the !queued branch alongside
the refcount_dec. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix nfsd_file leak on inter-server COPY setup failure
When nfsd4_setup_inter_ssc() fails, nfsd4_copy() returns
nfserr_offload_denied directly, bypassing the out: label where
release_copy_files() would drop the nf_dst reference taken by
nfs4_preprocess_stateid_op(). Each failed inter-server COPY
leaks one nfsd_file, pinning file/inode/dentry/vfsmount.
Fix by setting status and jumping to out: instead of returning
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: release OPEN-decoded posix ACLs via op_release
nfsd4_decode_createhow4() calls nfsd4_decode_fattr4(), which allocates
refcounted struct posix_acl objects via posix_acl_alloc() and stores
them in open->op_pacl and open->op_dpacl. These pointers must be
released once the OPEN compound finishes.
When nfsd4_decode_open_claim4() returns a non-seqid-mutating error,
the dispatcher short-circuits before op_func runs:
nfsd4_proc_compound()
if (op->status && op->opnum == OP_OPEN)
op->status = nfsd4_open_omfg(...)
if (!seqid_mutating_err(ntohl(op->status)))
return op->status; /* nfsd4_open() never runs */
...
opdesc->op_release(&op->u) /* must still release op_pacl/op_dpacl */
Before this change OP_OPEN had no .op_release in nfsd4_ops[], and the
release pair lived inside nfsd4_open() at its out_err: label. On the
short-circuit path nfsd4_open() is never invoked, so both posix_acl
refs leak on every malformed OPEN compound that carries valid POSIX
ACL createhow4 attributes.
Add nfsd4_open_release() and wire it as .op_release for OP_OPEN.
posix_acl_release() is NULL-safe, so the single release site covers
both the normal path and the nfsd4_open_omfg short-circuit. Remove
the matching posix_acl_release() pair from nfsd4_open()'s out_err:
label to avoid double-releasing.
The compound loop has two encoding branches: nfsd4_encode_operation()
for normal ops, and nfsd4_encode_replay() for v4.0 replayed ops.
op_release was only called from nfsd4_encode_operation(), so resources
attached to op->u leak on the replay path.
Move the op_release() call out of nfsd4_encode_operation() and the
replay branch, placing it after the if-else in nfsd4_proc_compound().
This gives a single call site in a fairly obviously-correct place,
covering both the normal encoding and replay paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix leaked inode reference on writeback abort at umount
ceph_dirty_folio() takes a wrbuffer claim on each newly dirtied folio: it
bumps i_wrbuffer_ref (taking an ihold() on the 0->1 transition) and
attaches the snap_context to folio->private. That claim is released only
by ceph_put_wrbuffer_cap_refs(), which for a submitted write runs from
writepages_finish().
In ceph_submit_write(), if ceph_inc_osd_stopping_blocker() fails -- which
happens during umount -- the request is aborted before submission: the
already-collected folios are only redirtied and unlocked, so
writepages_finish() never runs and the claim is leaked.
redirty_page_for_writepage() -> folio_redirty_for_writepage() ->
filemap_dirty_folio() sets PG_dirty directly and does not go through
->dirty_folio, so ceph_dirty_folio() is not re-entered to rebalance it.
Because every subsequent writeback also fails the osd_stopping_blocker,
i_wrbuffer_ref never returns to 0, the ihold() is never dropped, and the
inode cannot be evicted:
VFS: Busy inodes after unmount of ceph
kernel BUG at fs/super.c:650!
Release the orphaned claim in the abort path before redirtying, via
ceph_undo_wrbuffer_claim(): detach the snap_context, drop the wrbuffer
reference (letting i_wrbuffer_ref reach 0 and iput() the inode), and drop
the snap_context reference -- i.e. do what writepages_finish() would have
done for these never-submitted folios.
Only the locked_pages entries are undone; folios still in the fbatch were
never dirty-cleared by this call (folio_clear_dirty_for_io() is the
ownership-transfer point, and a successful move NULLs the fbatch slot), so
they hold no claim this call owns. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: close backchannel before destroying callback service
A backchannel receive can complete a request while the NFS callback
service is being torn down. xprt_complete_bc_request() removes the
request from bc_pa_list, drops bc_alloc_count, marks the request in use,
and then asks xprt_enqueue_bc_request() to hand it to the callback
service.
If teardown has already cleared xprt->bc_serv, xprt_enqueue_bc_request()
currently returns without enqueueing or freeing the committed request.
The xprt_get() taken on entry is leaked as well. If the producer wins
the race before bc_serv is cleared, it can also enqueue onto sv_cb_list
after nfs_callback_down() has stopped the callback threads, leaving the
request linked to a svc_serv that is about to be freed.
Close the producer side before callback threads are stopped. Add
xprt_svc_shutdown_bc() to clear xprt->bc_serv under bc_pa_lock, and call
it on callback shutdown and callback-start failure before stopping the
service threads. Requests that lose the NULL transition in
xprt_enqueue_bc_request() are released through the normal backchannel
free path after balancing bc_slot_count. Finally, drain any remaining
sv_cb_list requests after the callback threads have stopped and before
svc_destroy() frees the service. |
| Kimai is an open-source time tracking application. Versions prior to 2.58.0 contain a server-side request forgery vulnerability in their invoice PDF preview and generation workflow. If an attacker can control Markdown content that is later rendered into an invoice PDF, such as `Customer.invoiceText`, the server-side PDF renderer will fetch remote image URLs embedded in Markdown image syntax. This allows the application server to issue outbound requests to attacker-controlled or internal targets during PDF rendering. The behavior can be used for internal network probing, server-side reachability checks, and potentially follow-on exploitation depending on deployment environment and accessible internal services. Version 2.58.0 patches the issue. |
| A vulnerability has been found in openstatusHQ openstatus up to f04c827112f30a11d571ebdad3892826034d6265. Affected by this vulnerability is an unknown functionality of the file apps/status-page/src/lib/proxy/resolve-custom-domain-rewrite.ts. The manipulation leads to server-side request forgery. The attack may be initiated remotely. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The identifier of the patch is 86f370c9c20074c3c3fdec53a359874b8e670fd4. It is suggested to install a patch to address this issue. This issue got fixed with a silent patch. |
| Shelf is a platform for tracking physical assets. Prior to version 1.20.3, authenticated users with the `asset:import` permission can trigger server-side HTTP requests to attacker-controlled URLs through the Asset CSV Content Import feature. The `imageUrl` validation logic can be bypassed through multiple techniques, including image-extension suffixes, image-related path keywords, domain substring matching, and redirect chains. After validation, the server performs an unrestricted `fetch()` request to the supplied URL. This results in a Server-Side Request Forgery (SSRF) vulnerability that allows attackers to reach internal network services, cloud metadata endpoints, and arbitrary external hosts from the application's network context. Additionally, response bodies are fully buffered before size validation, creating a potential memory exhaustion vector. Version 1.20.3 patches the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS/localio: fix ref leak on nfs_uuid_add_file failure
When nfs_uuid_add_file() races with nfs_uuid_put() tearing down
uuid->net, it returns -ENXIO without publishing nfl->nfs_uuid via
rcu_assign_pointer(). nfs_open_local_fh() then enters its error
branch and only releases the slot's file ref and its paired net
ref plus its own entry-time net ref, while the close path is a
no-op:
nfs_close_local_fh()
nfs_uuid = rcu_dereference(nfl->nfs_uuid);
if (!nfs_uuid) { rcu_read_unlock(); return; } /* always */
nfsd_open_local_fh() returns localio holding a caller-owned +1
nfsd_file reference (from nfsd_file_get() after
nfsd_file_acquire_local()) and an entry-time nfsd_net reference
(from its first nfsd_net_try_get()) embedded as nf->nf_net. Both
are leaked on the failure path, pinning one nfsd_file (and the
underlying struct file, dentry, inode) and one nfsd_net_ref per
occurrence, which blocks nfsd_net and netns teardown.
Fix by releasing the caller-owned file ref and its net ref through
the existing helper, using a stack-local RCU pointer so the helper
can xchg it out, then returning -ENXIO so callers do not
dereference a localio whose slot has been cleared:
struct nfsd_file __rcu *tmp = RCU_INITIALIZER(localio);
nfs_to_nfsd_file_put_local(pnf);
nfs_to_nfsd_file_put_local(&tmp);
localio = ERR_PTR(-ENXIO);
The trailing nfs_to_nfsd_net_put(net) continues to release the
outer net ref, so all three nfsd_net_try_get() increments are
balanced on the error branch. |
| Server-side request forgery (ssrf) in Visual Studio Code allows an unauthorized attacker to bypass a security feature over a network. |
| isomorphic-git before 1.42.0 contains a prototype pollution vulnerability in the getRemoteInfo function that allows a malicious Git server operator to pollute Object.prototype by advertising crafted ref names containing '__proto__' path segments during ref negotiation. Attackers controlling a Git server can advertise a specially crafted ref such as '__proto__/corsProxy' to reroute all subsequent network operations through an attacker-controlled proxy, causing isomorphic-git to invoke the victim's onAuth callback and transmit credentials to the attacker when the victim calls getRemoteInfo with an attacker-supplied URL. |
| A weakness has been identified in projeto-siga siga up to 11.1.1. Affected by this issue is the function DownloadExterno.getUrl of the file sigaex/src/main/java/br/gov/jfrj/siga/vraptor/ExUtilController.java of the component HTML-to-PDF Endpoint. This manipulation of the argument html causes server-side request forgery. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in Eleveo Quality Management 9.7.0. Impacted is an unknown function of the file /enc-fwk-data/api/v3/conversations/<ID>/events of the component Conversation Handler. This manipulation of the argument createdBy causes dynamically-determined object attributes. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| IBM Langflow OSS 1.0.0 through 1.11.5 could allow a remote attacker to obtain sensitive information from internal network resources due to improper validation of user-supplied URLs. |
| SPIP before 4.4.18 contains a remote code execution vulnerability in the editer_objet action where the arg parameter resolves SQL table names without enforcing an editable columns allowlist, allowing attackers with a valid nonce to inject attacker-controlled rows into the spip_jobs table. Attackers can supply arg=job/0 with crafted fonction and args values, which are later unserialized and executed when the cron job queue is drained, resulting in arbitrary PHP function execution on the underlying system. |
| InstantCMS is a free and open source content management system. Versions prior to 2.18.2 have a Server-Side Request Forgery (SSRF) vulnerability in the file upload functionality (`system/core/uploader.php` at lines 509-532). When the "upload from URL" feature follows an HTTP redirect, the redirected target URL bypasses the private IP address blacklist check. This allows authenticated users to scan and access internal network services. Version 2.18.2 contains a fix. |
| IBM webMethods Integration Server 11.1 IBM webMethods Integration is vulnerable to an XML external entity injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. |
| In Jenkins 2.579 and earlier, LTS 2.568.2 and earlier, objects of types marked as storing their configuration in independent top-level configuration files in Jenkins (such as the global configuration and jobs) can appear as nested field values in user-submitted `config.xml` documents and subsequently handle HTTP requests via Stapler, resulting in remote code execution. |
| XenForo before 2.3.13 contains a server-side request forgery vulnerability in the PayPal REST webhook handler that allows unauthenticated attackers to cause the server to make outbound HTTP requests to arbitrary destinations by supplying a crafted certificate URL in webhook headers without scheme, hostname, or allowlist validation. Attackers can submit a crafted POST to the PayPal webhook callback endpoint to reach internal network resources including cloud instance metadata services, potentially disclosing IAM credentials or enabling secondary internal service exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mglru: fix and remove redundant unevictable folio handling
sort_folio() has a shortcut for moving folios that are no longer evictable
but are still sitting on a generation list. However, this shortcut is
buggy. It does not follow the PG_lru usage convention, and it has a more
serious issue.
Unevictable folios are not threaded on lists[LRU_UNEVICTABLE], so that
folio->lru can be reused to hold folio->mlock_count (see the comment in
lruvec_init()). Hence lruvec_add_folio() skips the list_add() for them,
and every other place that turns a folio unevictable initialises
mlock_count explicitly: lru_add() sets it to 0, __mlock_folio() and
__mlock_new_folio() set it to !!folio_test_mlocked(folio). sort_folio()
sets nothing, and the lru_gen_del_folio() right above it may have already
poisoned folio->lru via list_del(), so mlock_count ends up aliasing
LIST_POISON2, which reads as 0x122, i.e. 290. The result is user
visible. On munlock, __munlock_folio() decrements that bogus count, finds
it still non-zero and bails out before clearing PG_mlocked, so the folio
remains unevictable and the Mlocked accounting stays inflated until the
folio is freed.
The shortcut also touches the LRU flags in the wrong order. It calls
lru_gen_del_folio() while PG_lru is still set, so a concurrent
folio_test_clear_lru() (e.g. compaction, folio_isolate_lru()) can succeed
on a folio that has already been taken off the generation list, which may
lead to unexpected behavior.
So fix it by isolating them as common folios and letting the generic
shrink path cull them. This matches the classical LRU behavior, and there
should be no visible effect on the generic eviction or isolation behavior.
There is no performance concern either, such a folio goes through this
once, and then it is off the generation lists for good. |
