| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Avoid IDR updates while cleaning channels
scmi_cleanup_channels() walks the TX/RX channel IDRs with
idr_for_each() to free transport resources and destroy the dedicated
transport devices before calling idr_destroy().
The destroy callback removed each entry from the same IDR being walked.
That is not needed for this cleanup path, and it is unsafe because
idr_for_each() has not advanced its radix-tree iterator while the
callback is running. Removing the current entry from the callback can
invalidate the iterator state. The callback also cannot be protected by
rcu_read_lock(), because scmi_device_destroy() may sleep.
Leave IDR teardown to the following idr_destroy() call and keep the
callback limited to device destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Associate BOs with every job that accesses them
A submission can expand into a chain of jobs (e.g. bin + render + cache
clean). Implicit synchronization in v3d_submit_lock_reservations() is gated
on each job's bo[], but the BO list was only ever attached to the last job
of the chain. When that last job is a trailing CACHE_CLEAN job, the job
that actually consumes the BOs (that is, a RENDER or CSD job) was left with
bo_count == 0 and picked up no implicit dependencies. It could therefore
be dispatched to the hardware and read a BO while another context was still
writing it, leading to data corruption.
Attach the BOs to the job that consumes them, so (1) it acquires the
correct implicit dependencies during reservation locking and (2) they are
kept mapped until the end of the submission. Give it references to all
consuming job's BOs through v3d_job_reference_bos() instead of looking the
handles up a second time; that avoids a redundant lookup and guarantees
both jobs reference the exact same objects.
As the CACHE_CLEAN job now carries a BO array as well, add a per-job
`has_implicit_dep` flag so that only the consuming jobs take implicit
dependencies. The CACHE_CLEAN job (a global flush) and the BIN job (binning
waiting on another context is not a realistic scenario) are excluded. |
| In the Linux kernel, the following vulnerability has been resolved:
dax: read holder_ops once in dax_holder_notify_failure()
dax_holder_notify_failure() reads dax_dev->holder_ops twice without
READ_ONCE() -- once for the NULL check and once for the indirect
notify_failure() call. A concurrent fs_put_dax() can clear holder_ops
between the two reads, so the check can observe a non-NULL pointer while
the call dereferences NULL. (kill_dax() also clears holder_ops, but only
after synchronize_srcu(), so it cannot race a reader that is inside
dax_read_lock(); fs_put_dax() does no such synchronization.)
Fetch holder_ops once into a local with READ_ONCE() so the NULL check and
the indirect call observe the same value. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix requested device removal race
scmi_protocol_device_unrequest() drops scmi_requested_devices_mtx while
notifying listeners but continues to retain the per-protocol list head.
When two SCMI drivers for the same protocol unregister concurrently, one
thread can remove the final request and free the list head while the other
is running its notifier. The latter then dereferences the freed list head
after reacquiring the mutex and can free it a second time.
Complete the list and IDR updates, including freeing an empty list head,
before dropping the mutex. Keep the blocking notifier outside the critical
section and retain only the detached request across the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix valid_size extension over a shared writable mapping
When a shared writable mapping has its valid_size extended by a buffered
write or a page fault, exfat zeroes the page-cache gap below the new
valid_size. A store through the mapping can race with this zeroing and be
overwritten.
Fix this by zeroing the gap lazily. Drop ->map_pages so that every first
write fault goes through exfat_page_mkwrite(), which advances valid_size to
cover the faulting page. With fault-around enabled, a store could install a
writable PTE, skip ->page_mkwrite(), and land past valid_size without
advancing it. Extending valid_size one faulting page at a time also leaves
never-written pages in a large mapping alone.
The gap is filled with block granularity, zeroing only the not-uptodate
blocks and preserving blocks that may hold data stored through the mapping.
On the buffered-write path the invalidate lock is held and the gap is
unmapped before zeroing, so a racing store re-faults and, under the inode
lock, completes only after the gap has been zeroed and valid_size covers
it. |
| In the Linux kernel, the following vulnerability has been resolved:
md: scope memalloc_noio to allocation critical sections
Storing a memalloc_noio_save() token in mddev->noio_flags lets one task
save the token and another task restore it. With concurrent suspend sysfs
writes, task A can enter PF_MEMALLOC_NOIO, return to userspace still in
that scope, and later task B can restore A's saved token.
Avoid tying the token lifetime to mddev. Keep mddev_suspend() and
mddev_resume() only responsible for array suspension, and enter
PF_MEMALLOC_NOIO only in the MD paths that allocate memory after the array
has been suspended. Restore the token before resuming the array.
A reproducer repeatedly writes suspend_lo and suspend_hi from concurrent
workers and checks each worker's /proc/self/stat flags before and after the
sysfs write. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path
qla2x00_sysfs_read_vpd() called ha->isp_ops->read_optrom() a second time
after releasing optrom_mutex. The repeated read is redundant and, unlike
the first, runs without optrom_mutex held, exposing flash access to
concurrent optrom operations. Drop the duplicate call. |
| On affected platforms running Arista EOS, when multiple gRPC Network Security Interface (gNSI) transports are configured, a race condition in the gNSI Authz service may cause a policy rotation to fail silently. An authenticated user whose access was revoked by the new policy may retain unauthorized access to gRPC interfaces. This does not affect Bootz.
This issue was discovered internally by Arista, and the company is not aware of any malicious exploitation of this vulnerability in customer networks. |
| A race condition was addressed with improved state handling. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. An app may be able to cause unexpected system termination. |
| Snipe-IT 8.6.3 and earlier (and develop pre-release commits prior to the fix) contain a race condition in the asset checkout paths. Api\AssetsController::checkout() and Assets\AssetCheckoutController::store() call Asset::availableForCheckout() outside the mutation path and then invoke Asset::checkOut() without taking a row lock or re-checking availability, so two concurrent checkout requests for the same available asset can both observe it as available and both commit. This produces duplicate checkout-history rows, a doubled checkout_counter, and two CheckoutableCheckedOut events for a single-assignment asset, corrupting the audit trail and utilization/reconciliation reporting; the asset's final assigned_to remains singular, so the visible assignment stays intact. Exploitation requires an authenticated session holding the assets.checkout permission (or superuser) and precise concurrent timing. Fixed in 8.7.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: fix race between partial drm_dev_register() failure and ioctl
If drm_dev_register() fails after registering a minor (e.g. render minor
registered, primary minor fails), userspace could have opened the first
minor and entered a drm_dev_enter() critical section. Since the
unplugged flag was never set, the ioctl proceeds while the error path
tears down device resources.
Fix this by introducing drm_dev_synchronize_unplug(), which sets the
unplugged flag and waits for the SRCU barrier, ensuring all in-flight
drm_dev_enter() critical sections complete before cleanup proceeds; call
it on the error path of drm_dev_register(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix folio_nr_pages() race after put in large folio invalidate
Our v6.18 based Android system is continuely suffering livelock and bad
page stat as shown in[1] which related to broken xarray slot status. By
investigating big folio operations within f2fs, we find below races and
fix it by get the nr_pages before drop the refcount and folio_lock.
f2fs_get_read_data_folio() calls f2fs_folio_put() before
folio_nr_pages() when invalidating a large folio from the page cache.
That unlocks the folio and drops the caller reference, leaving a window
where a concurrent truncate or folio split can shrink the compound folio
or free it before the invalidate range is computed. An undersized range
then leaves split sub-folios in mapping->i_pages, which can later
interact badly with truncate and reclaim (stale xarray entries and bad
page state when folio->mapping no longer matches the mapping being
truncated).
[1]
PID: 2594 TASK: ffffff8169b81580 CPU: 7 COMMAND: "Thread-3"
#0 [ffffffc08ef2b8a0] xas_load at ffffffe52d1f42a4
#1 [ffffffc08ef2b900] find_get_entries at ffffffe52c185798
#2 [ffffffc08ef2bb60] truncate_inode_pages_range at ffffffe52c19e83c
#3 [ffffffc08ef2bbc0] truncate_inode_pages_final at ffffffe52c19ec2c
#4 [ffffffc08ef2bc20] f2fs_evict_inode at ffffffe52c4c8400
#5 [ffffffc08ef2bcc0] evict at ffffffe52c2de9f4
#6 [ffffffc08ef2bd00] iput at ffffffe52c2db1b4
#7 [ffffffc08ef2bd30] dentry_unlink_inode at ffffffe52c2d7204
#8 [ffffffc08ef2bd50] __dentry_kill at ffffffe52c2d3dcc
#9 [ffffffc08ef2bd80] dput at ffffffe52c2d3c3c
#10 [ffffffc08ef2bda0] __fput at ffffffe52c2b0a7c
#11 [ffffffc08ef2bde0] ____fput at ffffffe52c2b1034
#12 [ffffffc08ef2bdf0] task_work_run at ffffffe52beea200
#13 [ffffffc08ef2be20] exit_to_user_mode_loop at ffffffe52bfbc17c
#14 [ffffffc08ef2be80] el0_svc at ffffffe52d1f8e54
#15 [ffffffc08ef2beb0] el0t_64_sync_handler at ffffffe52d1f8d10 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Hold vport_slock for host map update in report ID acquisition
qla24xx_report_id_acquisition() format-1 handling drops vport_slock after
taking the vport reference and then calls qla_update_host_map() without
the lock. That reaches qla_update_vp_map(), which mutates the ha->host_map
btree via btree_insert32()/btree_update32()/btree_remove32() and is
documented to require vport_slock to be held by the caller. Running it
unlocked can race concurrent host_map updates and corrupt the btree.
The format-2 path in the same function already wraps its host_map update
(SET_AL_PA) in vport_slock; the format-1 path is the lone outlier.
Hold vport_slock across the format-1 qla_update_host_map() call to honor
the documented locking contract. The vref_count taken in the loop keeps
the vport valid, so this only adds the missing host_map serialization. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject
qla_nvme_ls_reject_iocb() allocates from and advances the request ring
through __qla2x00_alloc_iocbs() (which assumes the hardware_lock is
held) and qla2x00_start_iocbs() (which advances the ring and rings the
request-in doorbell), but takes no lock itself. Two of its callers
invoke it without the producer lock held:
- qla_nvme_xmt_ls_rsp(), the NVMe-FC .xmt_ls_rsp transport callback, on
its error path, and
- qla2xxx_process_purls_pkt(), run from the purex work/DPC context.
Both use ha->base_qpair, whose qp_lock_ptr is hardware_lock, so they can
run concurrently with normal I/O submission on the base ring and corrupt
the ring producer state, leading to duplicated or dropped commands. The
third caller, qla2xxx_process_purls_iocb(), runs inside
qla24xx_process_response_queue() with the qpair lock already held and is
safe; that is also why the lock cannot be taken inside the helper itself
(it would recursively re-acquire hardware_lock on the response path).
Take qp_lock_ptr around the two unlocked callers and document the helper
as caller-locked. Both run in process context, so spin_lock_irqsave() is
used and nothing in the locked region sleeps. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cec: Serialize exclusive follower delivery
cec_receive_notify() reads the exclusive follower pointer without the
adapter lock. Serialize the no-follower check and message delivery
against mode changes and release. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize flash version read in reset handler
The "update cache versions without reset" sysfs reset operation (0x20261)
calls get_flash_version(), which reads hardware flash registers, without
holding ha->optrom_mutex. The VPD update path serializes the same call
under optrom_mutex, so this reset path can interleave its flash register
accesses with a concurrent VPD or optrom flash operation and corrupt the
reads.
Hold ha->optrom_mutex across the get_flash_version() call to match the
VPD update path. |
| In the Linux kernel, the following vulnerability has been resolved:
media: qcom: iris: use disable_irq() during power-off
The IRQ is registered as a threaded IRQ.
Using disable_irq_nosync() in iris_vpu_power_off() does not wait
for an already queued threaded IRQ handler to complete before
returning.
As a result, a threaded IRQ handler may still run after the VPU has
been powered down and access hardware registers after power-off.
Replace disable_irq_nosync() with disable_irq() so the power-off path
waits for any in-flight threaded IRQ handler to complete before
returning. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: cs35l34: drain threaded IRQ before runtime suspend
cs35l34_runtime_suspend() currently switches the codec into
regcache_cache_only(true), asserts reset low, and powers the device off
without first quiescing the threaded IRQ registered by
devm_request_threaded_irq(). That leaves a window where
cs35l34_irq_thread() can still run after suspend has removed live
hardware access.
A running system can reach this during runtime PM while the driver still
has critical fault IRQs unmasked. If the threaded handler runs in that
window, it reads volatile INT_STATUS_1..4 after cache_only has been
enabled, ignores the regmap_read() failures, and can still execute the
PROT_RELEASE_CTL release sequence or the BST fault power-down writes.
Use disable_irq() before entering cache_only/reset-low/power-off so any
in-flight threaded handler is drained and no new IRQ thread can run
while the device is suspended. Re-enable the IRQ only after
runtime_resume() has restored live register access with regcache_sync().
Since probe only logs request_threaded_irq() failures and keeps going,
track whether the IRQ was actually installed before disabling or
re-enabling it. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Handle VNCR TLB invalidation race with vcpu_put() VNCR unmapping
While VNCR TLB invalidation always occurs under the MMU lock,
vcpu_put() doesn't, while it unmaps the VNCR page.
The problem is that the invalidation evaluates vncr_tlb::cpu to
decide whether an unmapping needs to take place (cpu != -1) before
performing it. On the other hand, this_cpu_reset_vncr_fixmap()
unconditionally unmaps if L1_VNCR_MAPPED is set.
These two obviously can race, with a TOCTOU pattern on the TLBI
path, and a BUG_ON() on the vcpu_put() path. And the two can end-up
calling vncr_fixmap(-1), with extra lethal effects.
Move the reset of vncr_tlb::cpu to -1 to a common function, and make
this update atomic so that only a single thread can reset the field
and perform the corresponding unmap. The vcpu_put() still need to
unconditionally unmap the current VNCR to close another ugly race.
Finally, the assignment of vncr_tlb::cpu is moved to be kept in sync
with the actual mapping, similar to L1_VNCR_MAPPED being set. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix race when loading and unloading a table
If the userspace calls two concurrent table load ioctls and one of them
succeeds and the other fails, there is a race condition because
dm_setup_md_queue walks &md->table_devices without any lock. If the walk
races with dm_table_destroy -> free_devices -> dm_put_table_device, there
is access to invalid memory.
Fix this race by extending the lock over the list walk. |
