| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v3.0 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit 663bed3c7b8b9a7624b0d95d300ddae034ad0614) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v4.0.3 enc ring
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit ff1a5a125c5a70c328806b9bc01d7d942cf3f9aa) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v4.0.5 enc ring
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit 084d94ac93707bdda07efb5cee786f632de4219b) |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/flexfiles: reject zero filehandle version count
ff_layout_alloc_lseg() decodes the filehandle-version array count
from the flexfiles layout body. The value is used as the count for
kzalloc_objs(), and the current code only rejects NULL.
A zero count yields ZERO_SIZE_PTR, which can be stored in
dss_info->fh_versions even though later flexfiles paths assume that at
least one filehandle version exists.
Reject fh_count == 0 before the allocation, matching the existing zero
version_count validation in the flexfiles GETDEVICEINFO parser.
A QEMU/KASAN run with a malformed flexfiles layout hit:
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:ff_layout_encode_ff_layoutupdate.isra.0+0x15f/0x750
ff_layout_encode_layoutreturn+0x683/0x970
nfs4_xdr_enc_layoutreturn+0x278/0x3a0
Kernel panic - not syncing: Fatal exception
The patched kernel rejects the malformed layout without KASAN/oops/panic,
and a valid fh_count=1 regression still opens, reads, and unmounts cleanly. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: reject descriptors with oversized CRC length
udf_read_tagged() skips CRC verification when descCRCLength +
sizeof(struct tag) exceeds the block size. A crafted UDF image can
set descCRCLength to an oversized value to bypass CRC validation
entirely; the descriptor is then accepted based solely on the 8-bit
tag checksum, which is trivially recomputable.
Reject such descriptors instead of silently accepting them. A
legitimate single-block descriptor should never have a CRC length that
exceeds the block. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Validate node_id in arena_alloc_pages()
arena_alloc_pages() accepts a plain int node_id and forwards it through
the entire allocation chain without any bounds checking.
Validate node_id before passing it down the allocation chain in
arena_alloc_pages(). |
| In the Linux kernel, the following vulnerability has been resolved:
pppoe: drop PFC frames
RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT
RECOMMENDED for PPPoE. In practice, pppd does not support negotiating
PFC for PPPoE sessions, and the current PPPoE driver assumes an
uncompressed (2-byte) protocol field. However, the generic PPP layer
function ppp_input() is not aware of the negotiation result, and still
accepts PFC frames.
If a peer with a broken implementation or an attacker sends a frame with
a compressed (1-byte) protocol field, the subsequent PPP payload is
shifted by one byte. This causes the network header to be 4-byte
misaligned, which may trigger unaligned access exceptions on some
architectures.
To reduce the attack surface, drop PPPoE PFC frames. Introduce
ppp_skb_is_compressed_proto() helper function to be used in both
ppp_generic.c and pppoe.c to avoid open-coding. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: handle rbtree insertion error in decode_choose_args()
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. The received CRUSH map may optionally contain
choose_args that get decoded in decode_choose_args(). In this function,
num_choose_arg_maps is read from the message, and a corresponding number
of crush_choose_arg_maps gets decoded afterwards. Each
crush_choose_arg_map has a choose_args_index, which serves as the key
when inserting it into the choose_args rbtree of the decoded crush_map.
If a (potentially corrupted) message contains two crush_choose_arg_maps
with the same index, the assertion in insert_choose_arg_map() triggers a
kernel BUG when trying to insert the second crush_choose_arg_map.
This patch fixes the issue by switching to the non-asserting rbtree
insertion function and rejecting the message if the insertion fails.
[ idryomov: changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
ipc: limit next_id allocation to the valid ID range
The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.
If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.
The bug is in ipc_idr_alloc() in the checkpoint/restore path.
1. ids->next_id is passed to:
idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)
2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.
3. The new object id is still encoded with the narrower SysV IPC index
width:
new->id = (new->seq << ipcmni_seq_shift()) + idx
4. Later removal goes through ipc_rmid(), which uses:
ipcid_to_idx(ipcp->id)
That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.
5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.
6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.
Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss()
Sashiko points out that the user can specify WQs sharing the same CQ as a
part of the uAPI and this will trigger the WARN_ON() then go on to corrupt
the kernel.
Just reject it outright and fail the QP creation. |
| In the Linux kernel, the following vulnerability has been resolved:
block: add pgmap check to biovec_phys_mergeable
biovec_phys_mergeable() is used by the request merge, DMA mapping,
and integrity merge paths to decide if two physically contiguous
bvec segments can be coalesced into one. It currently has no check
for whether the segments belong to different dev_pagemaps.
When zone device memory is registered in multiple chunks, each chunk
gets its own dev_pagemap. A single bio can legitimately contain
bvecs from different pgmaps -- iov_iter_extract_bvecs() breaks at
pgmap boundaries but the outer loop in bio_iov_iter_get_pages()
continues filling the same bio. If such bvecs are physically
contiguous, biovec_phys_mergeable() will coalesce them, making it
impossible to recover the correct pgmap for the merged segment
via page_pgmap().
Add a zone_device_pages_have_same_pgmap() check to prevent merging
bvec segments that span different pgmaps. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix undersized l_iclog_roundoff values
If the superblock doesn't list a log stripe unit, we set the incore log
roundoff value to 512. This leads to corrupt logs and unmountable
filesystems in generic/617 on a disk with 4k physical sectors...
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197.
XFS (sda1): failed to locate log tail
XFS (sda1): log mount/recovery failed: error -74
XFS (sda1): log mount failed
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Ending clean mount
...on the current xfsprogs for-next which has a broken mkfs. xfs_info
shows this...
meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
= exchange=1 metadir=1
data = bsize=4096 blocks=2579968, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1
log =internal log bsize=4096 blocks=16384, version=2
= sectsz=4096 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
= rgcount=0 rgsize=268435456 extents
= zoned=0 start=0 reserved=0
...observe that the log section has sectsz=4096 sunit=0, which means
that the roundoff factor is 512, not 4096 as you'd expect. We should
fix mkfs not to generate broken filesystems, but anyone can fuzz the
ondisk superblock so we should be more cautious. I think the inadequate
logic predates commit a6a65fef5ef8d0, but that's clearly going to
require a different backport. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: validate release report content before using for RTL8922DE
The commit 957eda596c76
("wifi: rtw89: pci: validate sequence number of TX release report")
does validation on existing chips, which somehow a release report of SKB
becomes malformed. As no clear cause found, add rules ahead for RTL8922DE
to avoid crash if it happens. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry
New test case fails unexpectedly when avx2 matching functions are used.
The test first loads a ranomly generated pipapo set
with 'ipv4 . port' key, i.e. nft -f foo.
This works. Then, it reloads the set after a flush:
(echo flush set t s; cat foo) | nft -f -
This is expected to work, because its the same set after all and it was
already loaded once.
But with avx2, this fails: nft reports a clashing element.
The reported clash is of following form:
We successfully re-inserted
a . b
c . d
Then we try to insert a . d
avx2 finds the already existing a . d, which (due to 'flush set') is marked
as invalid in the new generation. It skips the element and moves to next.
Due to incorrect masking, the skip-step finds the next matching
element *only considering the first field*,
i.e. we return the already reinserted "a . b", even though the
last field is different and the entry should not have been matched.
No such error is reported for the generic c implementation (no avx2) or when
the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback.
Bisection points to
7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection")
but that fix merely uncovers this bug.
Before this commit, the wrong element is returned, but erronously
reported as a full, identical duplicate.
The root-cause is too early return in the avx2 match functions.
When we process the last field, we should continue to process data
until the entire input size has been consumed to make sure no stale
bits remain in the map. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: Check to ensure report responses match the request
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: tegra - Add missing CRYPTO_ALG_ASYNC
The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its
asynchronous algorithms, causing the crypto API to select them for users
that request only synchronous algorithms. This causes crashes (at
least). Fix this by adding the flag like what the other drivers do.
Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just
get ignored and overridden by the registration function anyway. |
| The authentication endpoint of WSO2 Identity Server fails to provide a consistent system response when a username does not exist in the system, allowing attackers to differentiate between valid and invalid usernames. This difference in responses can be leveraged to enumerate existing user accounts.
Successful exploitation enables an attacker to discover valid usernames within the system, significantly increasing the risk of subsequent attacks such as brute force attacks on user credentials, social engineering attacks, and information leakage. The discovered usernames can be used to craft targeted phishing emails or other social engineering campaigns. |
| REDAXO is a PHP-based content management system. Prior to 5.21.2, rex_list::getSortColumn() in redaxo/src/core/lib/list.php accepts the sort request parameter without checking whether setColumnSortable() registered the requested column. An authenticated backend user can make prepareQuery() add an escaped but unauthorized ORDER BY identifier, allowing error-based enumeration of columns in joined tables and ordering by unselected sensitive fields such as rex_user.password. This issue is fixed in version 5.21.2. |
| A vulnerability was detected in light0011 cms c774dce31c6df0055568a8d5c53d964d99be199d/f72cf46f601efb2a0618c3814cc2f61380b38930. Affected by this vulnerability is the function file_exists of the file Public/Home/js/uploadify/check-exists.php of the component Uploadify. The manipulation of the argument filename results in file and directory information exposure. The attack may be launched remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Mina component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When processing of an exchange failed, the Mina consumer wrote exchange.getException() straight back over the socket to the remote peer. Over a textline codec that hands the peer the exception's class name and message; over the object codec it hands over the serialised exception, cause chain included. A remote peer able to provoke a failure could therefore read internal detail about the deployment - class and package names, and whatever a message or nested cause happens to carry, which in practice can include paths, host names and connection detail. The consumer had no option to suppress this, unlike the HTTP-family consumers aligned by CAMEL-23651.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, replaces the route exception with a generic one carrying no class name, message or stack trace, while still writing a reply so that a synchronous peer is not left to time out. Set muteException=false to restore the previous behaviour. For deployments that cannot upgrade immediately, add an onException handler that sets the reply body explicitly, so the framework never writes the exception back to the peer. |
