| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-scheme: cleanup access_pattern subdirs on scheme dir setup failure
When a DAMOS-scheme DAMON sysfs directory setup fails after setup of
access_pattern/ directory, subdirectories of access_pattern/ directory are
not cleaned up. As a result, DAMON sysfs interface is nearly broken until
the system reboots, and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures. |
| In the Linux kernel, the following vulnerability has been resolved:
efivarfs: fix error propagation in efivar_entry_get()
efivar_entry_get() always returns success even if the underlying
__efivar_entry_get() fails, masking errors.
This may result in uninitialized heap memory being copied to userspace
in the efivarfs_file_read() path.
Fix it by returning the error from __efivar_entry_get(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/vmware: Fix hypercall clobbers
Fedora QA reported the following panic:
BUG: unable to handle page fault for address: 0000000040003e54
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20251119-3.fc43 11/19/2025
RIP: 0010:vmware_hypercall4.constprop.0+0x52/0x90
..
Call Trace:
vmmouse_report_events+0x13e/0x1b0
psmouse_handle_byte+0x15/0x60
ps2_interrupt+0x8a/0xd0
...
because the QEMU VMware mouse emulation is buggy, and clears the top 32
bits of %rdi that the kernel kept a pointer in.
The QEMU vmmouse driver saves and restores the register state in a
"uint32_t data[6];" and as a result restores the state with the high
bits all cleared.
RDI originally contained the value of a valid kernel stack address
(0xff5eeb3240003e54). After the vmware hypercall it now contains
0x40003e54, and we get a page fault as a result when it is dereferenced.
The proper fix would be in QEMU, but this works around the issue in the
kernel to keep old setups working, when old kernels had not happened to
keep any state in %rdi over the hypercall.
In theory this same issue exists for all the hypercalls in the vmmouse
driver; in practice it has only been seen with vmware_hypercall3() and
vmware_hypercall4(). For now, just mark RDI/RSI as clobbered for those
two calls. This should have a minimal effect on code generation overall
as it should be rare for the compiler to want to make RDI/RSI live
across hypercalls. |
| A security flaw has been discovered in FastApiAdmin up to 2.2.0. Affected by this vulnerability is the function reset_api_docs of the file /backend/app/plugin/init_app.py of the component Custom Documentation Endpoint. The manipulation results in information disclosure. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. |
| Improper neutralization of special elements in user-supplied input within the ZIA Admin UI could allow an authenticated administrator to access or retrieve unauthorized internal information in rare conditions. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. The shipped "secure" security policy includes a rule intended to prevent reading/writing from standard streams. However, ImageMagick also supports fd:<n> pseudo-filenames (e.g., fd:0, fd:1). Prior to versions 7.1.2-15 and 6.9.13-40, this path form is not blocked by the secure policy templates, and therefore bypasses the protection goal of "no stdin/stdout." Versions 7.1.2-15 and 6.9.13-40 contain a patch by including a change to the more secure policies by default. As a workaround, add the change to one's security policy manually. |
| NVIDIA Delegated Licensing Service for all appliance platforms contains a vulnerability where an attacker could exploit an improper authentication issue. A successful exploit of this vulnerability might lead to information disclosure. |
| An arbitrary file-read vulnerability exists in XWEB Pro version 1.12.1
and prior, enabling unauthenticated attackers to read arbitrary files on
the system, and potentially causing a denial-of-service attack. |
| Statmatic is a Laravel and Git powered content management system (CMS). Starting in version 6.0.0 and prior to version 6.4.0, Authenticated Control Panel users may under certain conditions obtain elevated privileges without completing the intended verification step. This can allow access to sensitive operations and, depending on the user’s existing permissions, may lead to privilege escalation. This has been fixed in 6.4.0. |
| A SUID root-owned binary in /home/xd/terminal/XDTerminal in International Data Casting (IDC) SFX2100 on Linux allows a local actor to potentially preform local privilege escalation depending on conditions of the system via execution of the affected SUID binary. This can be via PATH hijacking, symlink abuse or shared object hijacking. |
| Data processing vulnerability in the certificate management module. Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| UptimeFlare is a serverless uptime monitoring & status page solution, powered by Cloudflare Workers. Prior to commit 377a596, configuration file uptime.config.ts exports both pageConfig (safe for client use) and workerConfig (server-only, contains sensitive data) from the same module. Due to pages/incidents.tsx importing and using workerConfig directly inside client-side component code, the entire workerConfig object was included in the client-side JavaScript bundle served to all visitors. This issue has been patched via commit 377a596. |
| A vulnerability in Apache IoTDB.
This issue affects Apache IoTDB: from 1.0.0 before 1.3.7, from 2.0.0 before 2.0.7.
Users are recommended to upgrade to version 1.3.7 or 2.0.7, which fixes the issue. |
| Fullchain is an umbrella project for deploying a ready-to-use CTF platform. In versions prior to 0.1.1, due to a mis-written NetworkPolicy, a malicious actor can pivot from a subverted application to any Pod out of the origin namespace. The flawed inter-ns NetworkPolicy breaks the security-by-default property expected as part of the deployment program, leading to a potential lateral movement. This issue has been fixed in version 0.1.1. To workaround, delete the failing network policy that should be prefixed by inter-ns- in the target namespace. |
| Improper access control in Samsung Camera prior to version 16.5.00.28 allows local attacker to access location data. User interaction is required for triggering this vulnerability. |
| A weakness has been identified in yeqifu warehouse up to aaf29962ba407d22d991781de28796ee7b4670e4. This affects the function saveUserRole of the file warehouse\src\main\java\com\yeqifu\sys\controller\UserController.java of the component Request Handler. This manipulation causes improper authorization. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. |
| ZimaOS is a fork of CasaOS, an operating system for Zima devices and x86-64 systems with UEFI. In versions up to and including 1.5.0, the application checks the validity of the username but appears to skip, misinterpret, or incorrectly validate the password when the provided username matches a known system service account. The application's login function fails to properly handle the password validation result for these users, effectively granting authenticated access to anyone who knows one of these common usernames and provides any password. As of time of publication, no known patched versions are available. |
| RustCrypto: Elliptic Curves is general purpose Elliptic Curve Cryptography (ECC) support, including types and traits for representing various elliptic curve forms, scalars, points, and public/secret keys composed thereof. In versions 0.14.0-pre.0 and 0.14.0-rc.0, a denial-of-service vulnerability exists in the SM2 PKE decryption path where an invalid elliptic-curve point (C1) is decoded and the resulting value is unwrapped without checking. Specifically, AffinePoint::from_encoded_point(&encoded_c1) may return a None/CtOption::None when the supplied coordinates are syntactically valid but do not lie on the SM2 curve. The calling code previously used .unwrap(), causing a panic when presented with such input. This issue has been patched via commit 085b7be. |
| wlc is a Weblate command-line client using Weblate's REST API. Prior to 1.17.0, wlc supported providing unscoped API keys in the setting. This practice was discouraged for years, but the code was never removed. This might cause the API key to be leaked to different servers. |
| An insufficient input validation vulnerability in NETGEAR Orbi devices'
DHCPv6 functionality allows network adjacent attackers authenticated
over WiFi or on LAN to execute OS command injections on the router.
DHCPv6 is not enabled by default. |
