| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper certificate validation in Logstash's TCP output could lead to a man-in-the-middle (MitM) attack in “client” mode, as hostname verification in TCP output was not being performed when the ssl_verification_mode => full was set. |
| The CleverControl employee monitoring software (v11.5.1041.6) fails to validate TLS server certificates during the installation process. The installer downloads and executes external components using curl.exe --insecure, enabling a man-in-the-middle attacker to deliver malicious files that are executed with SYSTEM privileges. This can lead to full remote code execution with administrative rights. No patch is available as the vendor has been unresponsive. It is assumed that previous versions are also affected, but this is not confirmed. |
| A vulnerability has been identified within Rancher that can be exploited
in narrow circumstances through a man-in-the-middle (MITM) attack. An
attacker would need to have control of an expired domain or execute a
DNS spoofing/hijacking attack against the domain to exploit this
vulnerability. The targeted domain is the one used as the Rancher URL. |
| OTP is a set of Erlang libraries, which consists of the Erlang runtime system, a number of ready-to-use components mainly written in Erlang, and a set of design principles for Erlang programs. A regression was introduced into the ssl application of OTP starting at OTP-25.3.2.8, OTP-26.2, and OTP-27.0, resulting in a server or client verifying the peer when incorrect extended key usage is presented (i.e., a server will verify a client if they have server auth ext key usage and vice versa). |
| A vulnerability was found in EZVIZ CS-C6-21WFR-8 5.2.7 Build 170628. It has been classified as problematic. This affects an unknown part of the component Davinci Application. The manipulation leads to improper certificate validation. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The identifier VDB-261789 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Hualai Xiaofang iSC5 3.2.2_112 and classified as problematic. Affected by this issue is some unknown functionality. The manipulation leads to improper certificate validation. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The identifier of this vulnerability is VDB-261788. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Certificate Validation (CWE-295) in the Gallagher Milestone Integration Plugin (MIP) permits unauthenticated messages (e.g. alarm events) to be sent to the Plugin.
This issue effects Gallagher MIPS Plugin v4.0 prior to v4.0.32, all versions of v3.0 and prior. |
| An issue in the native clients for Amazon WorkSpaces (when running Amazon DCV protocol), Amazon AppStream 2.0, and Amazon DCV Clients may allow an attacker to access remote sessions via man-in-the-middle. |
| Multiple MFPs provided by Brother Industries, Ltd. does not properly validate server certificates, which may allow a man-in-the-middle attacker to replace the set of root certificates used by the product with a set of arbitrary certificates. |
| PaperCut Print Deploy is an optional component that integrates with PaperCut NG/MF which simplifies printer deployment and management. When the component is deployed to an environment, the customer has an option to configure the system to use a self-signed certificate. If the customer does not fully configure the system to leverage the trust database on the clients, it opens up the communication between clients and the server to man-in-the-middle attacks.
It was discovered that certain parts of the documentation related to the configuration of SSL in Print Deploy were lacking, which could potentially contribute to a misconfiguration of the Print Deploy client installation. PaperCut strongly recommends to use valid certificates to secure installations and to follow the updated documentation to ensure the correct SSL configuration. Those who use private CAs and/or self-signed certificates should make sure to copy their Certification Authority certificate, or their self signed certificate if using only one, to the trust store of their operating system and to the Java key store |
| An Improper Certificate Validation vulnerability could allow an authenticated malicious actor with access to UniFi Protect Cameras adjacent network to make unsupported changes to the camera system. |
| A vulnerability has been identified in COMOS V10.6 (All versions < V10.6.1), COMOS V10.6 (All versions < V10.6.1), JT Bi-Directional Translator for STEP (All versions), NX V2412 (All versions < V2412.8900 with Cloud Entitlement (bundled as NX X)), NX V2506 (All versions < V2506.6000 with Cloud Entitlement (bundled as NX X)), Simcenter 3D (All versions < V2506.6000 with Cloud Entitlement (bundled as Simcenter X Mechanical)), Simcenter Femap (All versions < V2506.0002 with Cloud Entitlement (bundled as Simcenter X Mechanical)), Simcenter Studio (All versions < V2506.0001), Simcenter System Architect (All versions < V2506.0001), Tecnomatix Plant Simulation (All versions < V2504.0007). The SALT SDK is missing server certificate validation while establishing TLS connections to the authorization server. This could allow an attacker to perform a man-in-the-middle attack. |
| A vulnerability has been identified in COMOS V10.6 (All versions < V10.6.1), COMOS V10.6 (All versions < V10.6.1), NX V2412 (All versions < V2412.8700), NX V2506 (All versions < V2506.6000), Simcenter 3D (All versions < V2506.6000), Simcenter Femap (All versions < V2506.0002), Solid Edge SE2025 (All versions < V225.0 Update 10), Solid Edge SE2026 (All versions < V226.0 Update 1). The IAM client in affected products is missing server certificate validation while establishing TLS connections to the authorization server. This could allow an attacker to perform a man-in-the-middle attack. |
| WTW-EAGLE App does not properly validate server certificates, which may allow a man-in-the-middle attacker to monitor encrypted traffic. |
| A flaw was found in libnbd. The client did not always correctly verify the NBD server's certificate when using TLS to connect to an NBD server. This issue allows a man-in-the-middle attack on NBD traffic. |
| The Infotainment ECU manufactured by Bosch which is installed in Nissan Leaf ZE1 – 2020 uses a Redbend service for over-the-air provisioning and updates. HTTPS is used for communication with the back-end server. Due to usage of the default configuration for the underlying SSL engine, the server root certificate is not verified. As a result, an attacker may be able to impersonate a Redbend backend server using a self-signed certificate.
First identified on Nissan Leaf ZE1 manufactured in 2020. |
| MicroWorld eScan AV's update mechanism failed to ensure authenticity and integrity of updates: update packages were delivered and accepted without robust cryptographic verification. As a result, an on-path attacker could perform a man-in-the-middle (MitM) attack and substitute malicious update payloads for legitimate ones. The eScan AV client accepted these substituted packages and executed or loaded their components (including sideloaded DLLs and Java/installer payloads), enabling remote code execution on affected systems. MicroWorld eScan confirmed remediation of the update mechanism on 2023-07-31 but versioning details are unavailable. NOTE: MicroWorld eScan disputes the characterization in third-party reports, stating the issue relates to 2018–2019 and that controls were implemented then. |
| An Improper Certificate Validation vulnerability exists in Tenable Security Center where an authenticated, privileged attacker could intercept email messages sent from Security Center via a rogue SMTP server. |
| An issue pertaining to CWE-295: Improper Certificate Validation was discovered in Ayms node-To master. The application disables TLS/SSL certificate validation by setting 'rejectUnauthorized': false in TLS socket options |
| An insufficient certificate validation issue in the Palo Alto Networks GlobalProtect™ app enables attackers to connect the GlobalProtect app to arbitrary servers. This can enable a local non-administrative operating system user or an attacker on the same subnet to install malicious root certificates on the endpoint and subsequently install malicious software signed by the malicious root certificates on that endpoint. |
