| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Bitnami MariaDB Galera container images and Helm chart are affected by a hardcoded default credential vulnerability in the Galera replication health-check user. The MARIADB_REPLICATION_USER and MARIADB_REPLICATION_PASSWORD environment variables defaulted to monitor and monitor respectively. This user is granted REPLICATION CLIENT privileges from any host ('%'). The Bitnami Helm chart for MariaDB Galera did not expose parameters to configure this user's credentials, resulting in all chart deployments using this publicly known credential by default.
Affected versions — Container image: 10.6.x prior to 10.6.27-photon-5-r0; 10.11.x prior to 10.11.17-photon-5-r1; 11.4.x prior to 11.4.12-photon-5-r0; 11.8.x prior to 11.8.7-photon-5-r1; 12.3.x prior to 12.3.2-photon-5-r0 / 12.3.2-debian-12-r0. Helm chart: prior to 18.3.0. |
| Bitnami Cassandra container images are affected by a retained default superuser vulnerability. When a custom administrator account is configured via the CASSANDRA_USER environment variable, the container initialization script creates the new superuser account but fails to drop the built-in cassandra account in certain scenarios. This leaves the default cassandra:cassandra superuser active as an unintended access path.
Affected versions — Container image: 4.0.x prior to 4.0.20-photon-5-r7; 4.1.x prior to 4.1.11-photon-5-r7; 5.0.x prior to 5.0.8-photon-5-r4 / 5.0.8-debian-12-r3. |
| A vulnerability in the web-based management interface of Cisco Crosswork Network Controller could allow an authenticated, remote attacker to execute arbitrary commands on an affected device.
This vulnerability is due to insufficient input validation in the configuration template engine of the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system in limited areas of the file system. This vulnerability affects only areas of the operating system for which the template user has write permissions.
To exploit this vulnerability, the attacker must have valid template user credentials with write permissions. Template users with read permissions cannot exploit this vulnerability. |
| A vulnerability in the vmadmin CLI of Cisco Umbrella Virtual Appliance could allow an authenticated, local attacker to elevate privileges on an affected device.
This vulnerability is due to insufficient validation of user-supplied commands. An attacker with vmadmin privileges could exploit this vulnerability by using certain commands at the CLI. A successful exploit could allow the attacker to elevate privileges to root. |
| An out-of-bounds write vulnerability in FFmpeg's libavcodec library, specifically in the MagicYUV decoder, allows denial-of-service and, in some cases, can be exploited for remote code execution.
This vulnerability is associated with the file libavcodec/magicyuv.C.
This issue affects FFmpeg before version 8.1.2. |
| HAProxy through 3.4.0, fixed in commit 9a6d1fe, contains a null pointer dereference vulnerability in hpack_dht_insert() within src/hpack-tbl.c that fails to validate the return value of hpack_dht_defrag() when the memory pool is exhausted. An attacker can trigger HPACK dynamic table insertions under memory pressure to dereference a NULL pointer and crash HAProxy worker processes, causing denial of service. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
To create and manage guests, domctl operations are used by the control
domain, a possible Xenstore domain, or by a domain controlling a
particular guest. Some of these operations may not be executed in
parallel, so a system-wide lock is used. The way that lock is acquired
is, however, not providing any fairness. This is CVE-2026-42489.
Furthermore, with XSM/Flask in use, the lock acquire will, for some
operations, occur ahead of any permission checking. This is
CVE-2026-42490. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
To create and manage guests, domctl operations are used by the control
domain, a possible Xenstore domain, or by a domain controlling a
particular guest. Some of these operations may not be executed in
parallel, so a system-wide lock is used. The way that lock is acquired
is, however, not providing any fairness. This is CVE-2026-42489.
Furthermore, with XSM/Flask in use, the lock acquire will, for some
operations, occur ahead of any permission checking. This is
CVE-2026-42490. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| libssh2 through 1.11.1, fixed in commit 1762685, contains a pre-authentication denial of service vulnerability in the SSH_MSG_EXT_INFO handler in src/packet.c that allows a malicious SSH server to cause a client CPU exhaustion loop by sending a crafted extension count value. A malicious server can set nr_extensions to 0xFFFFFFFF during key exchange, causing the client to spin in a tight CPU loop for over 60 seconds because return values from _libssh2_get_string() are unchecked and the session timeout does not apply to CPU-bound loops. |
| OpenStack Horizon before 25.7.4 produces scripts for OpenStack RC file downloading that may have a crafted project name with shell metacharacters. NOTE: some parties consider this a security hardening opportunity to address certain types of user error, not a vulnerability. |
| Impact:
The undici WebSocket client enforces maxPayloadSize per-frame but does not enforce the cumulative size of fragmented uncompressed messages. A malicious WebSocket server can stream many small fragments that each pass per-frame validation but collectively exceed the configured limit, causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service.
Affected applications are those using the undici WebSocket client (new WebSocket(...)) that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint.
This is a regression specific to undici 8.1.0. The 6.25.0 line shipped the equivalent cumulative check from the start and is unaffected. The 7.x line never had the maxPayloadSize feature and is also unaffected.
Patches:
Upgrade to undici >= 8.5.0.
Workarounds:
No workaround is available. The fix must be applied through an upgrade. |
| Some shadow paging errors paths will switch the page-tables without
updating the currently running vCPU reference. This causes a mismatch
between the loaded page-tables and the mapcache metadata which can lead
to corruption of the mapcache. |
| Coturn is a free open source implementation of TURN and STUN Server. Versions prior to 4.11.0 contain a stored cross-site scripting (XSS) vulnerability in the web-admin HTTPS interface. An attacker who can create a TURN allocation with a crafted USERNAME value can inject HTML/JavaScript that executes when an authenticated web-admin user views the TURN session list. In configurations using anonymous TURN access (--no-auth), this may be exploitable without TURN credentials. In authenticated deployments, exploitation requires valid TURN credentials or control over a provisioned username. This issue has been fixed in version 4.11.0. |
| pam_usb provides hardware authentication for Linux using removable media. In versions prior to 0.9.2, getenv() environment variables XRDP_SESSION, DISPLAY and TMUX allow environment variable injection into local-check logic. These environment variables influence whether a current session is local or remote, and a PAM module that runs in the context of setuid binaries (sudo, su), getenv() returns attacker-controlled values whenever the process environment has been manipulated by a local user. This issue has been fixed in version 0.9.2. |
| Impact:
Undici's HTTP/1.1 client is vulnerable to response queue poisoning on reused keep-alive sockets. An attacker-controlled upstream server can inject an unsolicited HTTP/1.1 response onto an idle socket after a request completes. When the client dispatches the next request on that socket, it associates the injected response with the new request, causing responses to be delivered to the wrong requests.
This requires an attacker-controlled or compromised upstream HTTP/1.1 server and keep-alive connection reuse.
Patches:
Upgrade to undici v6.26.0, v7.28.0 or v8.5.0.
Workarounds:
Disable keep-alive connection reuse by setting keepAliveTimeout: 0 on the Client or Pool. |
| e107 is a content management system (CMS). Versions 2.3.5 and earlier contain a command injection vulnerability in the ImageMagick resize destination path. In resize_image(), the source path is escaped with escapeshellarg(), but the destination path is inserted inside raw double quotes in the convert command; in the submit-news upload flow, that destination filename includes the first six characters of user-controlled news title input. Because the title filter removes literal spaces but not tab characters, and shell expansions such as $(...) and backticks can survive into the quoted destination argument, /bin/sh -c may evaluate attacker-controlled input. Exploitation is possible only when all of the following non-default settings are enabled: resize_method=ImageMagick, subnews_attach=1, upload_enabled=1, subnews_resize is numeric between 30 and 5000, and the attacker is a non-admin in classes permitted by both subnews_class and upload_class. This issue has been fixed in version 2.3.6. |
| vantage6 is an open-source infrastructure for privacy preserving analysis. Versions prior to 5.0.0 provide an initial user with username `root` and password `root`. This is not ideal because attackers know that almost all vantage6 servers have a user with username `root` that probably has admin rights, and the initial password is very weak and it is possible that administrators forget to reset it. Version 5.0.0 fixes the issue. As a workaround, it is possible to delete the `root` user after it has been used to create other users. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Bricksable for Bricks Builder allows Stored XSS.
This issue affects Bricksable for Bricks Builder: from n/a through 1.6.83. |
