| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: prevent authentication frame length truncation
mwifiex_cfg80211_authenticate() derives the authentication frame length
from req->ie_len and req->auth_data_len, both of type size_t, but stores
it in a u16.
NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is
a u16, a single attribute can carry up to 65531 bytes of payload, so the
sum can exceed U16_MAX before it is assigned to pkt_len. The truncated
pkt_len determines the skb frame area, while the copy length remains
req->auth_data_len - 4, resulting in a heap buffer overflow.
For example, with auth_data_len equal to 65510 and no IEs, the sum is
65546. It is truncated to 10 and then reduced by four to 6. The driver
appends only six bytes to the skb with skb_put(), but then copies 65506
user-provided bytes into the authentication body.
Reaching this path requires CAP_NET_ADMIN in the user namespace owning
the network namespace, an up station netdev, and a suitable BSS/SAE
authentication request.
Compute the length in size_t, reject values that cannot be represented by
the firmware's u16 frame length field, and only then assign it to pkt_len. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext()
wilc_wlan_handle_isr_ext() takes the RX transfer size from the
device-reported interrupt status register (a 15-bit field shifted left by 2,
up to 131068 bytes) and reads that many bytes from the device into
rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap
check only handles the current offset; the size itself is never
compared against the buffer, so a bogus SDIO device can make the driver
OOB-write rx_buffer by up to ~32K with data it controls.
The oversized transfer also leaves rx_buffer_offset past the end of
the buffer, after which the unsigned wrap check stops working and
the overflow can repeat.
Drop any transfer whose size exceeds the RX buffer, acknowledging
the data interrupt and re-arming the RX engine so the bogus frame is
discarded and reception can continue. This also restores the
rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check
relies on.
This is not expected to change driver behavior in most cases:
without this check, an oversized transfer would most likely
corrupt neighboring kernel memory instead of completing anyway, and
the drop path performs the same interrupt acknowledgment and RX
engine re-arming as the normal path, so subsequent transfers are
received unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access
mr_check_range() validates that [iova, iova+length) falls within the
registered MR range using wraparound-prone arithmetic:
if (iova < mr->ibmr.iova ||
iova + length > mr->ibmr.iova + mr->ibmr.length)
A remote peer can craft an RDMA-Write/Read RETH so that iova + length
wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the
check. rxe_mr_iova_to_index() then computes a huge index (int idx, only
guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences
mr->page_info[huge], causing an out-of-bounds read/write and a kernel
oops that is triggerable by an unauthenticated remote peer.
Rewrite the check in overflow-safe form; the first two clauses guarantee
that the subsequent subtractions do not underflow:
if (iova < mr->ibmr.iova ||
length > mr->ibmr.length ||
iova - mr->ibmr.iova > mr->ibmr.length - length)
With the fix, mr_check_range() returns -EINVAL for the crafted iova and
the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB. |
| ImageSharp is a 2D graphics library. From 2.1.0 until 4.1.2, the TIFF CCITT Group 4 encoder allocates Width times rowsPerStrip bytes even though T6BitCompressor.CompressStrip can emit encoded row data and two 12-bit end-of-facsimile-block codes beyond that capacity. TiffCcittCompressor.WriteCode performs unchecked writes, and a decode-and-re-encode flow can inherit TiffCompression.CcittGroup4Fax and one-bit metadata from attacker-supplied input. The resulting out-of-bounds writes can corrupt memory and terminate the process. This issue is fixed in version 4.1.2. |
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, the TIFF CCITT Group 3 encoder allocates an undersized compressed-data buffer for narrow 1-bit images. TiffCcittCompressor.Initialize does not reserve enough space for the row data and T4 end-of-line codes, and T4BitCompressor.CompressStrip reaches unchecked writes when TiffCompression.CcittGroup3Fax is selected directly or inherited from decoded TIFF metadata. An attacker-controlled encode or decode-and-re-encode flow can write beyond the logical output span, corrupt process memory, and terminate the process. This issue is fixed in version 4.1.2. |
| In NTFS-3G before 2026.7.7, a heap buffer overflow exists in cat() in ntfscat.c that allows an attacker to corrupt heap memory in the ntfscat binary by crafting a malicious NTFS image. The overflow is triggered by reading a file. |
| An off-by-one error in the BSON bulk document writer in the MongoDB C Driver can write one zero byte immediately past a heap allocation when a document ends at a specific buffer boundary. An actor who can influence the size of documents serialized by an embedding application can corrupt adjacent process memory or terminate the process. Reaching this issue requires the application to use the BSON bulk-writer API and produce a precise cumulative document size. |
| In OpenStack Mistral through 23.0.0, the std.ssh_proxied action passes a caller-supplied proxy_command value directly to paramiko.ProxyCommand() before any SSH connection to a gateway or target host is attempted. An authenticated project member can use the standard action-execution API to submit an arbitrary local command as proxy_command; paramiko starts that command as a subprocess on the executor host under the executor's own service account, independent of whether the SSH connection itself ever succeeds. Only Mistral deployments that permit the std.ssh_proxied action, the default configuration, are affected. |
| simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. Prior to 4.0.0, the default blockUnsafeOperationsPlugin does not completely reject configuration includes supplied through customArgs to git.clone(). The missing include.path classification permits Git to load an attacker-controlled configuration file, and the initial remediation does not cover includeIf.<condition>.path, allowing the same file-loading primitive through a conditional include. A loaded configuration can set an executable Git option such as core.sshCommand, which Git invokes during the clone operation with the privileges of the Node.js process. Exploitation requires the application to pass attacker-influenced custom arguments and requires an attacker-controlled file that the process can read. This issue is fixed in 4.0.0. |
| IBM Guardium Data Protection 12.2 is affected by a command injection vulnerability in the SUID-root ssh_config_wrapper component. An authenticated high-privileged user can inject arbitrary commands through attacker-controlled arguments, resulting in command execution with root privileges. |
| simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. From 3.15.0 until 4.0.1, the default blockUnsafeOperationsPlugin does not classify trailer.<token>.cmd as unsafe configuration. An application that passes attacker-controlled values through SimpleGitOptions.config or inline -c arguments can therefore allow Git to invoke an attacker-selected shell command when git interpret-trailers processes the configured trailer. The command executes with the operating-system identity and permissions of the Node.js process. This issue is fixed in 4.0.1. |
| Apache Karaf's instance-management service (InstanceServiceImpl) builds the command line used to launch a child Karaf JVM by string concatenation, then executes it through /bin/sh (Unix) or cscript (Windows). The caller-supplied javaOpts value is spliced into that string unquoted. A javaOpts value containing shell metacharacters (;, |, `, $(...)) is interpreted by the shell instead of being passed to the JVM as an option, giving arbitrary OS command execution as the Karaf process user.
Reachable via the shell commands instance:create, instance:start, instance:restart, instance:change-opts, and the equivalent InstanceMBean JMX operations (createInstance, startInstance, changeJavaOpts, cloneInstance).
Mitigation * Set karaf.secured.command.compulsory.roles=admin in etc/system.properties to close the fail-open gap for all unconfigured command scopes.
* Restrict which principals can reach instance:* commands and InstancesMBean via etc/users.properties role assignments.
* Treat javaOpts passed to instance:create/instance:start/instance:change-opts/InstancesMBean as untrusted input only from fully-trusted operators. |
| In neuropilot, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS11249050; Issue ID: MSV-9172. |
| In neuropilot, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS11249062; Issue ID: MSV-9171. |
| In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: MOLY01898195; Issue ID: MSV-8906. |
| In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01778993; Issue ID: MSV-8898. |
| In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01778988; Issue ID: MSV-8897. |
| In vdec, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS11383899; Issue ID: MSV-9614. |
| A flaw was found in 389-ds-base. The Cockpit 389 Console's LDAP editor constructs an ldapsearch command by embedding an LDAP entry's distinguished name (DN) into a shell command string without proper escaping. An LDAP user with delegated privileges to create or rename directory entries could craft a malicious DN containing shell metacharacters. When a Cockpit administrator subsequently views the entry in the 389 Console, the embedded shell command executes with root privileges on the directory server host. |
| Foxit PDF Editor/Reader does not perform sufficient verification of the JPEG2000 image metadata in the PDF file, which leads to out-of-bounds write in the heap buffer during decoding, potentially causing the program to crash and introducing the risk of arbitrary code execution. |
