| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, mport_verify_package() in libmport/verify.c could continue after MD5File() or SHA256_File() failed and compare an expected checksum with stale data in the hash buffer rather than a newly computed digest. An attacker able to influence an installed file or the conditions that make hashing fail could receive a misleading integrity result or hide a checksum failure. This issue is fixed in version 2.7.8. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Don't query firmware state while chip is down
qla2x00_fw_state_show() initializes rval to QLA_FUNCTION_FAILED and jumps
to the out: label when the chip is down or EEH is busy. The out: block
then re-issued qla2x00_get_firmware_state() because rval != QLA_SUCCESS,
defeating the chip-down/EEH-busy guards and issuing a mailbox command
(outside optrom_mutex) during ISP reset or PCI error recovery, which can
hang the adapter. It also turned a normal in-lock mailbox failure into a
second unsynchronized mailbox attempt.
Make the out: fallback only mark the firmware state as unknown. The
mailbox is now issued at most once, inside optrom_mutex, and only when
the chip is up and not EEH-busy. |
| Steeltoe is an open source project that provides a collection of libraries that helps users build cloud-native applications. From 4.0.0 until 4.3.0, ConsulDiscoveryClient constructs ConsulServiceInstance objects by parsing each registration's secure metadata with a strict Boolean conversion. A principal that can register a Consul service can supply a secure value other than true or false, causing the exception from one instance to abort construction of the entire instance list and make the targeted service undiscoverable. When GetAllInstancesAsync enumerates all services, one malformed instance can abort enumeration across every service. The outage persists until the offending registration is removed. This issue is fixed in version 4.3.0. |
| SIPSorcery is a WebRTC, SIP, and VoIP library for C# and .NET. Prior to 10.0.9, RTPChannel.OnRTPPacketReceived and the STUNAttribute.ParseMessageAttributes, STUNXORAddressAttribute, and STUNAddressAttribute parsing path index untrusted bytes without sufficient length checks, while UdpReceiver.EndReceiveFrom closes the channel when those operations raise a non-socket exception. A remote party can send a single short RTP packet or malformed zero-to-seven-byte STUN address attribute to the shared RTP/ICE socket, including during ICE connectivity checks before DTLS or STUN MESSAGE-INTEGRITY verification, and terminate the active RTP or WebRTC media session. The attacker must reach or learn the advertised ephemeral RTP/ICE port, but no authentication or user interaction is required, and the impact is limited to availability. This issue is fixed in version 10.0.9. |
| Bambuddy is a self-hosted print archive and management system for Bambu Lab 3D printers. Starting in version 0.1.6 and prior to version 0.2.4.4, a fail-open in the authentication code allows any attacker to bypass authentication by flooding a public endpoint to exhaust resources causing database access to fail, granting unauthenticated access to all protected endpoints. Version 0.2.4.4 patches the issue. |
| ExifReader is a JavaScript Exif information parser. Prior to 4.40.1, ExifReader.load() and the asynchronous file and URL loaders can pass attacker-supplied HEIC or AVIF data to the ISO-BMFF parser in src/image-header-iso-bmff.js, where findMetaBox() and parseBox() accept an eight-byte box header without confirming that fields required by the parsed box remain in the DataView. A valid ftyp box followed by an empty free or unknown box can cause an unchecked full-box version read, while a truncated extended-size box can make getBoxLength() and hasEmptyHighBits() read absent size fields. The resulting RangeError escapes the main parsing path and can abort an application request or worker when parse errors are not defensively caught, causing denial of service. This issue is fixed in version 4.40.1. |
| A flaw was found in dbus-broker. When the process file-descriptor limit is reached, EMFILE/ENFILE errors during peer setup (notably SO_PEERPIDFD) are handled as fatal failures, causing the broker to exit. A local attacker who can open many connections to the user session bus can trigger this and deny service to the desktop session. Flatpak applications can reach the host session bus through the dbus proxy. |
| opentelemetry-js is the OpenTelemetry JavaScript Client. Prior to 0.217.0, a single malformed HTTP request crashes any Node.js process running the OpenTelemetry JS Prometheus exporter. The metrics endpoint (default 0.0.0.0:9464) has no error handling around URL parsing, so a request with an invalid URI causes an uncaught TypeError that terminates the process. This vulnerability is fixed in 0.217.0. |
| An elevation of privilege vulnerability exists when Windows improperly handles errors tied to Remote Access Common Dialog. An attacker who successfully exploited the vulnerability could run arbitrary code with elevated privileges.
To exploit this vulnerability an attacker would need to physically access the booted machine to reach the logon screen. An attacker could then exploit the vulnerability and take control of an affected system.
The update addresses the vulnerability by correcting how the Windows handles errors tied to Remote Access Common Dialog. |
| Permission control vulnerability in the Wi-Fi enhancement module. Impact: Successful exploitation of this vulnerability may affect availability. |
| baseline-browser-mapping 2.x before 2.11.0 calls process.exit() instead of throwing on invalid or conflicting input parameters, and can trigger immediate process termination, causing denial of service. |
| A vulnerability in the detection engine of Cisco Firepower Threat Defense Software could allow an unauthenticated, remote attacker to cause the unexpected restart of the SNORT detection engine, resulting in a denial of service (DoS) condition. The vulnerability is due to the incomplete error handling of the SSL or TLS packet header during the connection establishment. An attacker could exploit this vulnerability by sending a crafted SSL or TLS packet during the connection handshake. An exploit could allow the attacker to cause the SNORT detection engine to unexpectedly restart, resulting in a partial DoS condition while the detection engine restarts. Versions prior to 6.2.3.4 are affected. |
| A vulnerability in the detection engine that handles Secure Sockets Layer (SSL) packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition because the Snort process unexpectedly restarts. This vulnerability affects Cisco Firepower System Software prior to the first fixed release when it is configured with an SSL Decrypt-Resign policy. More Information: CSCvb62292. Known Affected Releases: 6.0.1 6.1.0 6.2.0. Known Fixed Releases: 6.2.0 6.1.0.2. |
| A vulnerability in the processing of SSH connections of Cisco Firepower Management Center (FMC) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a reboot on the affected device. |
| Improper Handling of Exceptional Conditions vulnerability in the WatchGuard Single Sign-On Client on Windows causes the client to crash while handling malformed commands. An attacker with network access to the client could create a denial of service condition for the Single Sign-On service by repeatedly issuing malformed commands. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix error path in multi-packet WQE transmit
Remove the erroneous unmap in case no DMA mapping was established
The multi-packet WQE transmit code attempts to obtain a DMA mapping for
the skb. This could fail, e.g. under memory pressure, when the IOMMU
driver just can't allocate more memory for page tables. While the code
tries to handle this in the path below the err_unmap label it erroneously
unmaps one entry from the sq's FIFO list of active mappings. Since the
current map attempt failed this unmap is removing some random DMA mapping
that might still be required. If the PCI function now presents that IOVA,
the IOMMU may assumes a rogue DMA access and e.g. on s390 puts the PCI
function in error state.
The erroneous behavior was seen in a stress-test environment that created
memory pressure. |
| Wings is the server control plane for Pterodactyl, a free, open-source game server management panel. Prior to 1.13.0, a malformed packet received during the SFTP connection handshake causes a Go panic. This issue is fixed in version 1.13.0. |
| CoreDNS is a DNS server written in Go. From 1.9.4 until 1.14.5, a network DNS client allowed to request AXFR for a CoreDNS zone can trigger a panic when CoreDNS is configured with k8s_external headless-service zone transfers and Kubernetes contains a headless service endpoint with no declared ports; plugin/kubernetes/object/endpoint.go creates Port: -1, plugin/k8s_external/msg_to_dns.go skips that service, plugin/k8s_external/transfer.go sends an empty []dns.RR batch, and plugin/transfer/transfer.go indexes records[0] without checking the batch is non-empty. This issue is fixed in version 1.14.5. |
| Valibot helps validate data using a schema. Versions prior to 1.4.2 can throw a TypeError inside its flatten() helper when validation issues contain attacker-controlled object keys such as toString, valueOf, or hasOwnProperty. The issue is reachable through normal record() validation. record() intentionally filters __proto__, prototype, and constructor, but it still accepts other own keys that collide with inherited Object.prototype properties. If the record key schema or value schema rejects such an entry, Valibot creates an issue path containing that key. Passing the resulting issues to Valibot's documented flatten() helper causes flatErrors.nested[dotPath] to resolve to the inherited method instead of an own error array, and the helper calls .push(...) on that function. This is not a global prototype pollution issue. The impact is availability/error handling: applications that validate user-controlled objects with record() and flatten validation errors for API responses can crash the request path with a TypeError instead of returning structured validation errors. This issue has been fixed in version 1.4.2. |
| Improper Handling of Exceptional Conditions vulnerability in Erlang OTP erts (epmd) allows an unauthenticated remote attacker to permanently terminate the Erlang Port Mapper Daemon (epmd) via connection slot exhaustion.
The do_accept function in erts/epmd/src/epmd_srv.c calls epmd_cleanup_exit() when accept(2) returns EMFILE (per-process file descriptor limit reached) or ENFILE (system-wide file descriptor limit reached), rather than treating these as recoverable conditions. An attacker can exhaust epmd's file descriptor slots by holding many TCP connections open while periodically sending a single byte to reset the idle timeout, then causing accept(2) to return EMFILE, which kills the daemon. epmd has no per-source-IP connection cap, making the attack feasible from a single source.
On Debian/Ubuntu default packaging the impact is amplified: the systemd unit inherits a low file descriptor soft limit, and repeated daemon deaths trigger systemd's start-rate-limit, permanently failing both epmd.service and epmd.socket and requiring manual operator intervention to recover.
This issue affects OTP from OTP 17.0 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15. |
