| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Authentication Bypass by Spoofing vulnerability in WPDeveloper Essential Addons for Elementor allows Identity Spoofing.
This issue affects Essential Addons for Elementor: from n/a through 6.8.0. |
| ASE2000 2.35 through 2.37 is vulnerable to an improper certificate validation vulnerability, which may allow an attacker to impersonate the trusted peer, complete the TLS handshake, and read or modify protected communications. |
| Missing authorization in Core in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially spoof address bar via a crafted HTML page. (Chromium security severity: Low) |
| Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Through 1.5.0, the validity store uses a strict lower-bound comparison that expires a stored transaction too early relative to Transaction::is_valid_at, allowing a remote attacker to replay the same signed transaction during a blocks_per_batch minus one block window and cause the sender and recipient balances to be updated twice. This issue is fixed in version 1.5.1. |
| Authentication Bypass by Capture-replay vulnerability in Apache Tomcat's DIGEST authenticator. If, before windowSize requests have been made, a client makes a DIGEST
authenticated request with a nonceCount on the upper boundary of the
replay window then that request is replayable once only while the
associated nonceCount remains within the replay window.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100, from 7.0.30 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue. |
| Netmaker disables certificate verification on the connection to the configured mail server. The sender in pro/email/smtp.go assigns a TLS configuration whose skip-verify field is set to true unconditionally, directly beneath a comment stating that the setting should be false in production. No configuration value governs it and no code path restores verification, so the client accepts any certificate the mail server presents, including one an interposing party supplies. Mail that Netmaker sends over that connection includes password-reset messages carrying single-use tokens and user invitations carrying enrolment links, so a party positioned on the path between the server and its mail relay can read those messages in transit and use a captured reset token before the intended recipient does. The setting is absent from the development branch but present in the latest release. |
| kas is a setup tool for bitbake based projects. Prior to 5.4, internal SSH key setup triggered by SSH_PRIVATE_KEY or SSH_PRIVATE_KEY_FILE creates ~/.ssh/config when no user-specific SSH configuration exists and adds a global Host * rule containing StrictHostKeyChecking no. In kas/libcmds.py, ssh_no_host_key_check() runs without checking ctx.managed_env, so the setting persists after kas exits and affects future SSH sessions by the same local user, extending beyond the intended short-lived continuous integration environment. A later SSH connection can therefore accept an attacker-controlled host key without verification, increasing the risk of a man-in-the-middle attack that compromises session confidentiality or integrity. This issue is fixed in version 5.4. |
| CakePHP Authentication is an authentication plugin for CakePHP that can also be used in PSR-7 based applications. Versions before 2.11.2, from 3.0.0 through 3.3.6, and from 4.0.0 through 4.2.0 allow authentication bypass and potential CPU or memory exhaustion when CookieAuthenticator uses unencrypted, forgeable legacy tokens. This issue is fixed in versions 2.11.2, 3.3.7, and 4.2.1. |
| joserfc is a Python library that provides an implementation of several JSON Object Signing and Encryption (JOSE) standards. Prior to version 1.7.3, JWTClaimsRegistry applies membership matching to list-valued iss and sub claims, allowing an array-valued iss that contains the expected issuer to pass an intended equality check and enabling issuer-validation bypass. This issue is fixed in version 1.7.3. |
| OAuth2 Proxy honours a client-supplied X-Forwarded-Uri header when deciding whether a request may skip authentication, because the guard added for CVE-2026-40575 is inert in the default reverse-proxy configuration. GetRequestURI in pkg/requests/util/util.go prefers that header over the real request URI whenever CanTrustForwardedHeaders returns true, and isAllowedPath in oauthproxy.go matches the skip_auth_routes and skip_auth_regex allow list against the resulting path. CanTrustForwardedHeaders in pkg/apis/middleware/scope.go grants that trust when the caller's address is in the trusted proxy set, and buildTrustedProxyNetSet falls back to defaultTrustedProxyIPs, which is 0.0.0.0/0 and ::/0, whenever reverse proxy mode is enabled without trusted_proxy_ip configured. Every client is therefore treated as a trusted proxy. An unauthenticated attacker can request a protected upstream path while setting X-Forwarded-Uri to a value matching an allow-listed route, so the skip-auth decision is made against the spoofed value while the upstream receives the protected path unchanged. |
| Netty (io.netty:netty-handler) versions from 4.2.0.Final through 4.2.16.Final and versions through 4.1.136.Final disable TLS hostname verification on the SslProvider.OPENSSL client path when a plain (non-extended) X509TrustManager is used and Unsafe-based trust-manager wrapping is unavailable (Java 25+). In this configuration the OpenSSL client does not perform hostname verification, allowing a man-in-the-middle attacker to present a certificate issued for a different hostname that is accepted without validation. Fixed in 4.2.17.Final and 4.1.137.Final. |
| A flaw was found in JSS (Java Security Services). The JSSTrustManager class does not verify NSS trust flags when validating CA certificates, allowing certificates present in the NSS database without TRUSTED_CA flags to be accepted as trust anchors for TLS connections. In non-default configurations where certificate revocation checking is disabled, this could allow a man-in-the-middle attacker to forge certificates accepted by PKI client connections. |
| Authentication Bypass by Capture-replay vulnerability in dropbox samly allows an attacker to authenticate as the subject of a captured SAML assertion by resubmitting it.
Samly.Helper.decode_idp_auth_resp/3 in lib/samly/helper.ex calls esaml_sp:validate_assertion/2, whose default duplicate detector is a no-op. The /3 arity accepting a DuplicateFun exists in esaml and implements the check, but Samly never calls it and offers no configuration to supply one, so the SAML 2.0 Web Browser SSO Profile requirement that a bearer assertion be used once is unenforced. An attacker holding a valid SAMLResponse obtained from the network, from browser history, or from logs can submit the identical bytes repeatedly until the assertion's NotOnOrAfter passes, each time establishing a session as the assertion's subject.
This issue affects samly: from 0.3.0 onward. |
| An issue was discovered in openHiTLS 0.2.0 through 0.3.2. In the X.509 certificate chain verification, the basic constraints extension and CA flag processing of intermediate CAs are only verified for v3 certificates, and v1/v2 certificates are ignored. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to improper certificate validation. |
| Improper certificate validation in the Devolutions Server connection handling in Devolutions Password Manager 2026.2.1.0 and earlier on Android, iOS, and macOS allows an adjacent-network attacker to intercept and modify sensitive information via a forged TLS certificate. |
| In Splunk SOAR versions below 8.6.0, an unauthenticated user who can observe or alter network traffic between Splunk SOAR and a configured CyberArk Representational State Transfer (REST) server could access or modify all relevant data exchanged through that credential manager. The vulnerability is possible because the CyberArk REST client does not verify server certificates by default. The attack requires the attacker to have network-path interception capability between Splunk SOAR and the configured CyberArk REST server. For more information see Manage your organization's credentials with a password vault (https://help.splunk.com/en/splunk-soar/soar-cloud/administer-soar-cloud/configure-administration-settings-in-splunk-soar-cloud/manage-your-organizations-credentials-with-a-password-vault) in the Splunk documentation. |
| In Splunk SOAR versions below 8.6.0, an unauthenticated user could spoof the source IP address in a crafted request to an Automation Broker notification endpoint and execute arbitrary code on the Splunk SOAR host. The vulnerability is possible because the Splunk SOAR Automation Broker trusts a client-supplied source IP address header as proof that the request originates from the local system. Successful exploitation can expose all relevant data, affect system integrity, and disrupt service availability. For more information see About Splunk SOAR Automation Broker (https://help.splunk.com/en/splunk-soar/splunk-automation-broker/about-splunk-soar-automation-broker/about-splunk-soar-automation-broker) in the Splunk documentation. |
| Etherpad is a real-time collaborative editor. From 2.6.0 until 3.1.0, Etherpad's src/node/hooks/express/tokenTransfer.ts uses POST /tokenTransfer to store an author token for transfer between browsers and exposes it through GET /tokenTransfer/{uuid}. Although the record includes createdAt, the transfer has no expiration check, is not removed after successful redemption, and is returned by res.send(tokenData), including the raw author token. An unauthenticated attacker who obtains a transfer UUID can repeatedly redeem it, receive fresh author cookies, read the cleartext token, and impersonate the originating author for pad read and write operations. This issue is fixed in version 3.1.0. |
| Monkeytype is a minimalistic and customizable typing test. In 26.26.0 and earlier, the backend rate-limit key generator in backend/src/middlewares/rate-limit.ts uses client-controlled cf-connecting-ip and x-forwarded-for headers before the trust-proxy-derived req.ip value. An unauthenticated attacker can rotate either header to create a new bucket for each request, bypassing rootRateLimiter, badAuthRateLimiter, getKey(), and the getKeyWithUid() fallback used by public endpoints. This permits repeated POST /users/forgotPasswordEmail and verificationEmail requests, mail bombing registered users, consuming Firebase or SMTP quota, evading brute-force protection, and enabling resource exhaustion. Exploitability of cf-connecting-ip depends on deployment topology, but x-forwarded-for and direct-to-origin paths remain affected when those values are not overwritten by a trusted proxy. No fixed version is available as of this review. |
