| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This vulnerability allows attackers to execute arbitrary commands on the underlying system. Because the web portal runs with root privileges, successful exploitation grants full control over the device, potentially compromising its availability, confidentiality, and integrity. |
| A vulnerability in the web-based management interface of Cisco Unified Industrial Wireless Software for Cisco Ultra-Reliable Wireless Backhaul (URWB) Access Points could allow an unauthenticated, remote attacker to perform command injection attacks with root privileges on the underlying operating system.
This vulnerability is due to improper validation of input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system of the affected device. |
| NeKernal is a free and open-source operating system stack. Prior to version 0.0.3, there are several memory safety issues that can lead to memory corruption, disk image corruption, denial of service, and potential code execution. These issues stem from unchecked memory operations, unsafe typecasting, and improper input validation. This issue has been patched in version 0.0.3. |
| A vulnerability in the Mitel 6800 Series, 6900 Series, and 6900w Series SIP Phones through 6.4 SP4 (R6.4.0.4006), and the 6970 Conference Unit through 6.4 SP4 (R6.4.0.4006) or version V1 R0.1.0, could allow an unauthenticated attacker to conduct a command injection attack due to insufficient parameter sanitization. A successful exploit could allow an attacker to execute arbitrary commands within the context of the phone, leading to disclosure or modification of sensitive configuration data or affecting device availability and operation. |
| Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in WatchGuard AuthPoint Password Manager on MacOS allows an a adversary with local access to execute code under the context of the AuthPoint Password Manager application.
This issue affects AuthPoint Password Manager for MacOS versions before 1.0.6.
|
| A vulnerability, which was classified as critical, has been found in agno-agi agno up to 1.7.5. This issue affects the function MCPTools/MultiMCPTools in the library libs/agno/agno/tools/mcp.py of the component Model Context Protocol Handler. The manipulation of the argument command leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In AMD Versal Adaptive SoC devices, the incorrect configuration of the SSS during runtime (post-boot) cryptographic operations could cause data to be incorrectly written to and read from invalid locations as well as returning incorrect cryptographic data. |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Starting in version 0.3.2 and prior to versions 0.3.8, 0.4.19, and 0.5.6, there is a possibility for denial of service by memory exhaustion in `net-imap`'s response parser. At any time while the client is connected, a malicious server can send can send highly compressed `uid-set` data which is automatically read by the client's receiver thread. The response parser uses `Range#to_a` to convert the `uid-set` data into arrays of integers, with no limitation on the expanded size of the ranges. Versions 0.3.8, 0.4.19, 0.5.6, and higher fix this issue. Additional details for proper configuration of fixed versions and backward compatibility are available in the GitHub Security Advisory. |
| An LDAP injection vulnerability in the login page of Gladinet CentreStack v13.12.9934.54690 allows attackers to access sensitive data or execute arbitrary commands via a crafted payload injected into the username field. |
| A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component. |
| ProFTPD 1.3.7a contains a denial of service vulnerability that allows attackers to overwhelm the server by creating multiple simultaneous FTP connections. Attackers can repeatedly establish connections using threading to exhaust server connection limits and block legitimate user access. |
| A vulnerability has been identified in SIPROTEC 5 6MD84 (CP300) (All versions < V10.0), SIPROTEC 5 6MD85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 6MD86 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 6MD89 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 6MU85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7KE85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SA82 (CP150) (All versions < V10.0), SIPROTEC 5 7SA86 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SA87 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SD82 (CP150) (All versions < V10.0), SIPROTEC 5 7SD86 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SD87 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SJ81 (CP150) (All versions < V10.0), SIPROTEC 5 7SJ82 (CP150) (All versions < V10.0), SIPROTEC 5 7SJ85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SJ86 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SK82 (CP150) (All versions < V10.0), SIPROTEC 5 7SK85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SL82 (CP150) (All versions < V10.0), SIPROTEC 5 7SL86 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SL87 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7SS85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7ST85 (CP300) (All versions < V10.0), SIPROTEC 5 7ST86 (CP300) (All versions < V10.0), SIPROTEC 5 7SX82 (CP150) (All versions < V10.0), SIPROTEC 5 7SX85 (CP300) (All versions < V10.0), SIPROTEC 5 7SY82 (CP150) (All versions < V10.0), SIPROTEC 5 7UM85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7UT82 (CP150) (All versions < V10.0), SIPROTEC 5 7UT85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7UT86 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7UT87 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7VE85 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7VK87 (CP300) (All versions >= V7.80 < V10.0), SIPROTEC 5 7VU85 (CP300) (All versions < V10.0), SIPROTEC 5 Compact 7SX800 (CP050) (All versions < V10.0). Affected devices do not properly limit the bandwidth for incoming network packets over their local USB port. This could allow an attacker with physical access to send specially crafted packets with high bandwidth to the affected devices thus forcing them to exhaust their memory and stop responding to any network traffic via the local USB port. Affected devices reset themselves automatically after a successful attack. The protection function is not affected of this vulnerability. |
| An attacker can craft an input to the Parse functions that would be processed non-linearly with respect to its length, resulting in extremely slow parsing. This could cause a denial of service. |
| EasyFlow GP developed by Digiwin has a Denial of service vulnerability, allowing unauthenticated remote attackers to send specific requests that result in denial of web service. |
| An arbitrary file upload vulnerability in M2Soft CROWNIX Report & ERS v5.x to v5.5.14.1070, v7.x to v7.4.3.960, and v8.x to v8.2.0.345 allows attackers to execute arbitrary code via supplying a crafted file. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"
I've found that pynfs COMP6 now leaves the connection or lease in a
strange state, which causes CLOSE9 to hang indefinitely. I've dug
into it a little, but I haven't been able to root-cause it yet.
However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on
number of operations per NFSv4 COMPOUND").
Tianshuo Han also reports a potential vulnerability when decoding
an NFSv4 COMPOUND. An attacker can place an arbitrarily large op
count in the COMPOUND header, which results in:
[ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total
pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO),
nodemask=(null),cpuset=/,mems_allowed=0
when NFSD attempts to allocate the COMPOUND op array.
Let's restore the operation-per-COMPOUND limit, but increased to 200
for now. |
| An issue was discovered in Atos Eviden BullSequana XH2140 BMC before C4EM-125: OMF_C4E 101.05.0014. Some BullSequana XH products were shipped without proper hardware programming, leading to a potential denial-of-service with privileged access. |
| Lara Translate MCP Server is a Model Context Protocol (MCP) Server for Lara Translate API. Versions 0.0.11 and below contain a command injection vulnerability which exists in the @translated/lara-mcp MCP Server. The vulnerability is caused by the unsanitized use of input parameters within a call to child_process.exec, enabling an attacker to inject arbitrary system commands. Successful exploitation can lead to remote code execution under the server process's privileges. The server constructs and executes shell commands using unvalidated user input directly within command-line strings. This introduces the possibility of shell metacharacter injection (|, >, &&, etc.). This vulnerability is fixed in version 0.0.12. |
| When performing an online tag generation to devices which communicate
using the ControlLogix protocol, a machine-in-the-middle, or a device
that is not configured correctly, could deliver a response leading to
unrestricted or unregulated resource allocation. This could cause a
denial-of-service condition and crash the Kepware application. By
default, these functions are turned off, yet they remain accessible for
users who recognize and require their advantages. |
| thread-amount is a tool that gets the amount of threads in the current process. Prior to version 0.2.2, there are resource leaks when querying thread counts on Windows and Apple platforms. In Windows platforms, the thread_amount function calls CreateToolhelp32Snapshot but fails to close the returned HANDLE using CloseHandle. Repeated calls to this function will cause the handle count of the process to grow indefinitely, eventually leading to system instability or process termination when the handle limit is reached. In Apple platforms, the thread_amount function calls task_threads (via Mach kernel APIs) which allocates memory for the thread list. The function fails to deallocate this memory using vm_deallocate. Repeated calls will result in a steady memory leak, eventually causing the process to be killed by the OOM (Out of Memory) killer. This issue has been patched in version 0.2.2. |
