| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An integer overflow in the libtiff rgb2ycbcr utility's cvtRaster() function when computing strip buffer sizes can result in an undersized heap allocation and subsequent heap-based buffer overflow during YCbCr conversion of a crafted TIFF image |
| An issue was discovered in Denx U-Boot before 2026.04. An integer overflow vulnerability in the ZFS filesystem support can be triggered by malformed on-disk metadata. The issue may result in incorrect memory allocation followed by out-of-bounds memory access, potentially leading to a crash or arbitrary code execution during the boot process. |
| Integer overflow in Chromium in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to read memory inside the sandbox via a crafted file. (Chromium security severity: Low) |
| An heap overflow vulnerability in the WatchGuard Fireware OS iked process allows a remote unauthenticated attacker to execute arbitrary code by sending specially crafted network traffic. |
| Integer overflow in Chromecast in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Integer overflow in WebRTC in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Low) |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. OpenEXR versions before 3.2.11, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13 can return an out-of-bounds pointer from TypedDeepImageChannel::row() when a crafted deep EXR has a nonzero dataWindow origin. This vulnerability occurs because the API combines zero-based row access with an absolute-coordinate-adjusted base pointer, allowing a crash or limited information disclosure. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions before 3.2.11, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13, a crafted tiled EXR can trigger a heap out-of-bounds write on 32-bit/ILP32 builds when read through the public TiledRgbaInputFile RGBA API. The file uses a small 40x40 dataWindow but a 65537x65537 tile size. On ILP32, the Array2D<Rgba> tile-conversion buffer size calculation overflows, allocates a much smaller heap buffer, and tile decode writes past that allocation. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.1.0 through 3.2.10, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13, an int32_t multiplication in OpenEXRCore's unpack_sample_table() can overflow while decoding a crafted deep tiled EXR file, producing an invalid pointer that leads to a read from an unmapped memory address and a crash. Because the overflow occurs in the standard decoding path (exr_decoding_run), any application that decodes deep tiled EXR files is affected. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.12, a reachable assertion failure in the HTJ2K decode path allows a crafted HTJ2K-compressed EXR file to cause an unconditional process abort in any application that calls exr_start_read() on untrusted input, resulting in denial of service. The crash is triggered by a QCD marker whose lower five bits are zero, which OpenEXR passes into the vendored OpenJPH library while constructing the codestream and evaluating its quantization delta parameters. OpenJPH uses an assertion rather than a recoverable error to validate those bits, so any invalid value calls abort() directly and cannot be intercepted by surrounding error handling, a problem compounded by OpenEXR wrapping only its internal HT header parser in error handling while leaving the later codestream read and construction calls unprotected. This issue has been resolved in version 3.4.13. |
| A flaw was found in EAP's jboss-remoting. A remote unauthenticated attacker who can reach :8080 (or :9990, or :4447) and complete an Upgrade: jboss-remoting handshake can cause OOM errors that degrade requests server-wide, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_table_check: skip special zero mappings
page_table_check_set() and page_table_check_clear() account mappings based
on PageAnon(). Shared zero-page PTEs and huge zero PMDs are special
mappings, but page_table_check can still account them as file-backed
pages.
An unprivileged process can populate enough zero mappings to overflow
file_map_count and hit the existing BUG_ON(). The PTE path can do this
with the shared zero page, and the PMD path can do the same with huge zero
mappings.
Skip special zero mappings in the user page-table accounting paths. Keep
the PTE-side pte_special() check, and identify huge zero PMDs from the
mapped folio instead of pmd_special(). That covers architectures where
pmd_special() is a no-op without adding huge_zero_pfn checks to the
generic counter helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp/mst: fix buffer overflows in sideband chunk accumulation
drm_dp_sideband_append_payload() has three related bugs when processing
device-provided sideband reply data:
1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken
directly from the DP sideband header. If a device sends msg_len=0,
curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len)
is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow).
drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy()
writes 255 bytes into msg[], both far out of bounds.
2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is
only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks
until curchunk_idx reaches curchunk_len, writing up to 15 bytes past
the end of chunk[] into msg[].
3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to
msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256],
so the memcpy can spill into adjacent struct fields.
All three are reachable from any DP MST device that can forge sideband
reply messages on a physical connection. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
afu_ioctl_dma_map() accepts a 64-bit length from userspace via
DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value
is passed to afu_dma_pin_pages() where npages is derived as
length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes
int nr_pages, causing implicit truncation if length is very large.
Validate map.length at the ioctl entry point before calling
afu_dma_map_region(), rejecting values whose page count exceeds
INT_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Use unsigned int for ndp_index
The variable ndp_index is declared as a signed integer, but it stores
the return value of get_ncm(), which is unsigned.
A malicious host can supply a large offset that overflows the signed
ndp_index, making it negative. Because ndp_index is compared against
unsigned bounds, this negative value bypasses sanity checks and leads
to an out-of-bounds read when calculating the address of the NDP
block (ntb_ptr + ndp_index).
Fix this by changing ndp_index to unsigned int to ensure consistent
unsigned comparisons throughout the function. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ltc4282) Clamp negative current limits
When a negative value is passed to ltc4282_write_curr(), the signed long
val is cast directly to u64:
drivers/hwmon/ltc4282.c:ltc4282_write_curr() {
/* need to pass it in millivolt */
u32 in = DIV_ROUND_CLOSEST_ULL((u64)val * st->rsense, DECA * MICRO);
...
}
This cast converts negative inputs into large positive values. The
subsequent division result overflows the u32 in variable, truncating
to a pseudo-random positive value. When this is passed to
ltc4282_write_voltage_byte(), it is clamped to the maximum limit instead
of zero.
Clamp val to 0 and to the maximum supported upper limit before the cast
and assign the result to a 64-bit temporary variable before the division
to avoid the underflow and an also possible overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: Validate T10 PI scatterlist counts
When T10 PI is negotiated, vhost-scsi splits protection bytes from
the data iterator before mapping the request scatterlists. A malformed
request can claim protection bytes that cover or exceed the full payload
length. The former leaves no data bytes to map, while the latter
underflows exp_data_len before advancing the iterator. Both cases can let
a zero data SGL count reach sg_alloc_table_chained(), which triggers
BUG_ON(!nents).
Reject protection lengths that cover or exceed the payload before
subtracting prot_bytes and advancing the iterator. Also propagate
negative errors from the protection SGL calculation before calling the
allocator, matching the data SGL path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve pointer state for commuted arithmetic
When scalar += pointer is handled in adjust_ptr_min_max_vals(), the
destination register inherits the pointer state from the source pointer.
Copying only selected fields is fragile because pointer provenance is
tracked by several bpf_reg_state fields.
Use the caller's temporary offset register to preserve the scalar operand
while replacing the destination with the full pointer state. This preserves
the frame number for PTR_TO_STACK registers and keeps parent identity
fields consistent. |
| IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 through OP940.81 (Power HMC) is affected by a vulnerability in the interface between the BMC/FSP and the host system. An attacker with service account or root access to the BMC/FSP can read and write arbitrary regions of host system memory, giving full control over the host system and all hosted partitions, resulting in a confidentiality, integrity, and availability impact. |
| IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the service processor mailbox interface. An attacker with authenticated service-level access to the FSP can exploit this vulnerability, allowing arbitrary code to be executed in the host firmware runtime, giving full control over the managed system, resulting in a confidentiality, integrity, and availability impact to the managed system. |
