| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: fix secure device page leak on uv_page_in() failure
In kvmppc_svm_page_in(), if uv_page_in() fails after
kvmppc_uvmem_get_page() has succeeded, the secure device page is never
released. kvmppc_uvmem_get_page() sets a bit in kvmppc_uvmem_bitmap,
allocates a kvmppc_uvmem_page_pvt struct, marks the GFN as
KVMPPC_GFN_UVMEM_PFN, and calls zone_device_page_init() which sets
refcount=1 and locks the page. The subsequent goto out_finalize skips
the *mig.dst assignment, so migrate_vma_finalize() is a no-op for the
page, and none of those resources are ever reclaimed.
Each occurrence permanently consumes one entry from the firmware-bounded
secure memory pool (kvmppc_uvmem_bitmap), leaks pvt, and leaves the GFN
marked as secure — making it unusable for the lifetime of the VM.
The twin __kvmppc_svm_page_out() already handles the analogous uv_page_out()
failure correctly with unlock_page(dpage); __free_page(dpage). Apply
the same pattern here: unlock_page() followed by put_page(), which
chains through free_zone_device_folio() into kvmppc_uvmem_folio_free()
to clear the bitmap bit, free pvt, and reset the GFN state.
Reachable whenever uv_page_in() returns an error (e.g. UV pool
exhaustion) on any POWER9/10 + Ultravisor/PEF system. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: remove flawed WARN_ON_ONCE from nfsd_mode_check
The header for commit e75b23f9e323 ("nfsd: check d_can_lookup in
fh_verify of directories") details the assumption that justified
adding the WARN_ON_ONCE to nfsd_mode_check(), that assumption is
invalid (in the case of NFS reexport).
When NFSD exports an NFS filesystem it is very possible for
nfsd_mode_check() to encounter a @dentry that doesn't have
i_op->lookup (see nfs_fhget()'s NFS_ATTR_FATTR_MOUNTPOINT and
NFS_ATTR_FATTR_V4_REFERRAL handling, and d_flags_for_inode()).
So remove nfsd_mode_check()'s WARN_ON_ONCE(). The nfserr_notdir
return on that branch must stay. It guards the subsequent
lookup_one_unlocked() -> __lookup_slow() path, which calls
inode->i_op->lookup() with no NULL check, so returning nfserr_notdir
is what keeps a client LOOKUP into such a @dentry from dereferencing
a NULL method pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Add better pm_runtime error handling in func probe
Add a common error path in probe that balances the runtime PM reference. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Avoid false migration warning for proxy donors
Proxy execution can move a blocked donor's scheduling context to the
lock owner's CPU even when the donor is migration-disabled. The donor
does not execute there, and its original execution CPU remains recorded
in wake_cpu.
set_task_cpu() warns unconditionally for migration-disabled tasks, so a
subsequent proxy migration or the wakeup path returning the donor home
triggers a false positive: moving a blocked scheduling context does not
violate the migration-disabled execution context.
For example, creating a mutex owner on CPU1 and a migration-disabled
waiter on CPU0 can trigger the following warning:
proxy_migrate_repro: donor blocking on CPU0 with migration disabled
proxy_migrate_repro: donor moved from CPU0 to CPU1
WARNING: kernel/sched/core.c:3389 at set_task_cpu+0x1d3/0x280
...
Call Trace:
try_to_wake_up+0x43f/0x780
__mutex_unlock_slowpath+0x330/0x540
owner_fn+0x9f/0xc0 [proxy_migrate_repro]
...
proxy_migrate_repro: donor woke on CPU0, task_cpu=0
proxy_migrate_repro: completed
Exclude blocked proxy donors from the warning. The proxy wakeup path
restores an executable placement before clearing the blocked state. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: avoid WARN in set_bitrate_mask when sdata not in driver
ieee80211_set_bitrate_mask() checks if the interface is running via
ieee80211_sdata_running(), but it does not check if the interface is
still present in the driver.
When sdata is running but IEEE80211_SDATA_IN_DRIVER is not set, the
call reaches drv_set_bitrate_mask() in driver-ops.h which hits
wlan1: Failed check-sdata-in-driver check, flags: 0x0
WARNING: net/mac80211/driver-ops.h:884 at drv_set_bitrate_mask
Syzkaller triggers this via wext SIOCSIWRATE ioctl. The Call Trace shows
wext_ioctl_dispatch() in wext-core.c dispatching the ioctl, calling
ioctl_standard_call() for SIOCSIWRATE, which calls cfg80211_wext_siwrate()
in wext-compat.c. That builds a bitrate mask and calls
rdev_set_bitrate_mask() which ends up in ieee80211_set_bitrate_mask() in
cfg.c. The interface is marked running via SDATA_STATE_RUNNING but
flags is 0, so check_sdata_in_driver() fails.
When the interface is being torn down, or when wext ioctl is issued
during interface bringup before drv_add_interface() sets IN_DRIVER, the
running check passes while IN_DRIVER is clear.
Check IEEE80211_SDATA_IN_DRIVER in ieee80211_set_bitrate_mask() before
calling the driver, returning -ENETDOWN. This avoids the WARN_ONCE in
driver-ops.h and matches other cfg.c operations that bail early when not
in driver.
This change should be safe because wiphy mutex is held in
cfg80211_wext_siwrate() via guard(wiphy), and IN_DRIVER is set/cleared
under RTNL and wiphy paths in drv_add_interface() and
drv_remove_interface() in driver-ops.c, so the check is race-free
against driver add/remove. Returning -ENETDOWN is the same error other
not-running paths use and does not introduce new locking.
[also add second syzbot report] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: fix heap OOB write on key removal
When a key is removed (data == NULL), rsi_hal_load_key() runs:
memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ);
set_key is a struct rsi_set_key *, so the subscript is scaled by
sizeof(struct rsi_set_key) (160 bytes): &set_key[FRAME_DESC_SZ] is
skb->data + 2560, and the memset writes 144 zero bytes starting
2.4KB past the end of the 160-byte skb data buffer, corrupting
unrelated heap objects. The intended byte offset would have been
(u8 *)set_key + FRAME_DESC_SZ.
The write fires on every DISABLE_KEY callback, so plain disconnects,
roams and interface teardowns trigger it on real networks.
The memset is redundant: the whole buffer is zeroed right after
allocation, so the frame sent to the device is byte-identical
without it. Drop the else branch; normal operation is unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xfrm: reject unrepresentable espintcp transport headers
ESP-in-TCP can hand xfrm packets whose transport header offset no longer
fits after the stream parser trims the TCP envelope. The plain transport
header reset truncates that offset and triggers the skb warning path.
Use the careful transport-header helper and drop the skb through the
existing XFRM error path when the offset cannot be represented. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: hold device reference for secondary fwnode teardown
In gpio_secondary_fwnode_init(), acpi_bus_find_device_by_name() returns a
device reference, but the local dev variable is declared with
__free(put_device), dropping the reference at the end of each iteration.
Meanwhile, devm_add_action_or_reset() saves the dev pointer for
gpio_secondary_unset() without incrementing its reference count, which
could lead to a use-after-free during driver teardown if the device is
released in the interim.
Acquire an explicit device reference with get_device() when registering
the devres action, and drop it with put_device() inside
gpio_secondary_unset(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown
After a DESTROY_SESSION the per-session teardown path can free a
session while rpciod still holds an inflight callback rpc_task that
dereferences clp->cl_cb_session. nfsd4_probe_callback_sync() flushes
cl_callback_wq, but once nfsd4_run_cb_work() has called
rpc_call_async() the rpc_task lives on rpciod; flushing the workqueue
does not wait for it. rpc_shutdown_client() does drain rpciod tasks,
but uses a 1-second wait_event_timeout — tasks stuck in rpc_delay()
(e.g. 2-second NFS4ERR_DELAY retries) can outlive the drain.
destroy path rpciod
------------ ------
unhash_session(ses)
nfsd4_probe_callback_sync(clp)
flush_workqueue(cl_callback_wq)
/* returns; rpc_task still live */
nfsd4_put_session_locked(ses)
free_session(ses) -> kfree(ses)
nfsd4_cb_sequence_done()
reads cb_clp->cl_cb_session
/* freed slab */
A second window exists in nfsd4_process_cb_update(). When
__nfsd4_find_backchannel() returns NULL because unhash_session() has
already removed the destroyed session from cl_sessions,
setup_callback_client() takes the v4.1 early return so
clp->cl_cb_session = ses never fires and the field retains a pointer
to the about-to-be-freed session.
Fix both by converting cl_cb_session to an RCU-protected pointer:
- Move the cl_cb_session = ses assignment in setup_callback_client()
to after rpc_create() succeeds, so it is only published when a
working backchannel exists. Clear cl_cb_session on the error
return in nfsd4_process_cb_update(). Both stores use
rcu_assign_pointer().
- Annotate cl_cb_session with __rcu. All rpciod-side readers use
rcu_read_lock()/rcu_dereference() and check for NULL, bailing to
the appropriate error or requeue path:
encode_cb_sequence4args(), decode_cb_sequence4resok(),
nfsd41_cb_get_slot(), nfsd41_cb_release_slot(),
nfsd4_cb_prepare(), and nfsd4_cb_sequence_done().
- Switch __free_session() from kfree() to kfree_rcu() so the
session slab is not reclaimed until after an RCU grace period,
guaranteeing that rpciod readers inside rcu_read_lock() never
dereference freed memory.
- Pass the session pointer to the nfsd_cb_seq_status and
nfsd_cb_free_slot tracepoints instead of having them re-read
cl_cb_session.
- nfsd4_cb_prepare() calls rpc_exit() when the session is NULL,
routing through the done/release path to requeue the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: validate symlink target length in NFSv4 CREATE
nfsd4_decode_create() accepts an unbounded cr_datalen from the wire for
NF4LNK symlink targets, allowing a client to force a kmalloc of up to
the maximum RPC payload size (several MiB) per COMPOUND op that persists
until compound teardown. The VFS rejects oversized targets with
ENAMETOOLONG, but the allocation has already occurred.
Reject cr_datalen == 0 early with nfserr_inval and cr_datalen greater
than NFS4_MAXPATHLEN (PATH_MAX) with nfserr_nametoolong to bound the
allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: add fh_want_write() for early-verified SETATTR in nfsd_proc_setattr()
The BOTH_TIME_SET branch calls fh_verify() early so setattr_prepare()
can inspect the dentry. This causes nfsd_setattr() to skip
fh_want_write(), so notify_change() runs without a mount write
reference.
Add the missing fh_want_write() call after the early fh_verify(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix UAF in async copy cancel and shutdown
An async copy could be freed or used after free while a teardown caller
(OFFLOAD_CANCEL, nfsd4_shutdown_copy, nfsd4_cancel_copy_by_sb) raced the
copy kthread:
- find_async_copy() bumped copy->refcount but left the copy on
clp->async_copies, so the reaper's cleanup_async_copy() could run
release_copy_files() concurrently with a cancel/shutdown caller. Both
put and NULL nf_src/nf_dst without a common lock, double-putting the
nfsd_file and freeing it early.
- nfsd4_do_async_copy() set NFSD4_COPY_F_STOPPED before its final uses
of the copy (nfsd_update_cmtime_attr() on copy->nf_dst,
nfsd4_send_cb_offload()). nfsd4_stop_copy() treats a set STOPPED bit
as "kthread done, skip kthread_stop()", so a teardown caller ran
release_copy_files() -- which puts and NULLs nf_dst -- while the
kthread still dereferenced it (NULL/UAF).
- copy->copy_task was never pinned. The one-shot kthread self-reaps on
return, so kthread_stop()'s get_task_struct() could touch a freed
task_struct.
- co_cb is embedded in the copy, but nfsd4_send_cb_offload() held a
reference only on the client, so a concurrent teardown could free
the copy while the CB_OFFLOAD callback was in flight.
Fix the teardown lifetime as a whole:
- find_async_copy() unlinks the copy (clear cp_clp, list_del_init)
under async_lock; the cancel, shutdown, and sb-cancel paths drop the
list-membership reference via nfs4_put_copy() after nfsd4_stop_copy().
Drop the now-redundant list_del fixup from cleanup_async_copy().
- Because unlinking hides the copy from the reaper, its
cleanup_async_copy() can no longer remove the copy's s2s_cp_stateids
entry; the cancel/shutdown/sb-cancel paths now call
nfs4_free_copy_state() themselves (while cp_clp is still valid) so
the entry does not dangle at freed memory for the laundromat and
manage_cpntf_state() to dereference.
- Give the kthread its own reference, taken in nfsd4_copy() before
wake_up_process() and dropped at the end of nfsd4_do_async_copy();
call wake_up_process() before list_add().
- Pin the task_struct with get_task_struct() in nfsd4_copy(), released
in nfs4_put_copy(), so kthread_stop() is safe whenever the kthread
exits. Set NFSD4_COPY_F_STOPPED only in nfsd4_stop_copy(), which now
always kthread_stop()s before release_copy_files(); completion is
still reported via NFSD4_COPY_F_COMPLETED, so
nfsd4_has_active_async_copies() is unaffected. Each teardown caller
removes the copy from clp->async_copies first, so kthread_stop() runs
exactly once.
- Take a copy reference in nfsd4_send_cb_offload(), dropped in
nfsd4_cb_offload_release(). The kthread still holds its own reference
there, so the refcount_inc() cannot race the final free.
- Read cp_clp with smp_load_acquire() to pair with the unordered
set_bit()/clear_bit() writers (Documentation/atomic_bitops.rst). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reject out-of-range useconds in NFSv2 SETATTR/CREATE
The NFSv2 sattr decoder converts the wire useconds to nanoseconds in
svcxdr_decode_sattr():
iap->ia_atime.tv_nsec = tmp2 * NSEC_PER_USEC;
tmp2 is a u32 and NSEC_PER_USEC is 1000, so the product is computed in
unsigned long. On ILP32 that is 32 bits, and an out-of-range useconds
value such as 4294968 wraps to tv_nsec == 704. The corruption therefore
happens during decode, before any proc function can inspect the value,
and a later range check on tv_nsec would see an in-range result and
accept it. Rejecting in the decoder yields an RPC GARBAGE_ARGS reply.
NFSv2 defines no NFSERR_INVAL, so there is no NFS-level status to return
for a malformed time argument, and the check cannot move to the proc
function the way the v3/v4 nsec range checks do.
Guard the raw useconds before the multiplication and reject values
greater than 1000000. useconds == 1000000 is kept: it is the Sun
convention for "set to the current server time", and the in-tree Linux
NFSv2 client emits it in both the atime and the mtime field for a plain
touch / utimes(file, NULL) (see encode_sattr() and
xdr_encode_current_server_time() in fs/nfs/nfs2xdr.c). Rejecting 1000000
would turn that common operation into a hard decode failure for both
SETATTR and CREATE. 1000000 * NSEC_PER_USEC is 10^9, which does not wrap
on ILP32, so the Sun convention value passes through safely. Only
genuinely out-of-range values (> 1000000) are rejected. The atime and
mtime guards are therefore symmetric.
The decoder only applied the Sun convention in the mtime block, which
clears ATTR_ATIME_SET|ATTR_MTIME_SET when mtime useconds == 1000000. If a
client puts 1000000 in the atime field but not in the mtime field, the
atime block stored an out-of-range tv_nsec (10^9) and left ATTR_ATIME_SET
set, so the bogus value reached the filesystem. Apply the convention in
the atime block as well, clearing ATTR_ATIME_SET so the server uses its
current time and ignores the value. Only ATTR_ATIME_SET is cleared there.
The mtime block keeps its existing behavior, where 1000000 means "set
both atime and mtime to now".
[ cel: various tweaks, addenda, and clean-ups ] |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent lock owner use-after-free during client teardown
__destroy_client() releases a client's open owners, but a lock owner
whose only reference is a blocked lock (nbl) stays on
cl_ownerstr_hashtbl. client_has_state() does not count a bare owner,
so DESTROY_CLIENTID can reach __destroy_client() with such owners
present.
__destroy_client() then walks the table, calling remove_blocked_locks()
on each owner without a reference. Freeing a blocked lock drops the
owner reference held via flc_owner. The per-net laundromat reaps
blocked locks from nn->blocked_locks_lru independently of client state.
The two paths share blocked_locks_lock only for the list splice, not
the owner's lifetime. The laundromat therefore frees the owner as
__destroy_client() dereferences it, a NULL dereference in
remove_blocked_locks().
nfsd4_release_lockowner() holds a reference across the same call;
__destroy_client() does not. Hold cl_lock across the walk, taking a
reference and unhashing each owner, then drop it before
remove_blocked_locks() and nfs4_put_stateowner(), which take
blocked_locks_lock and cl_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: reject buckets with mismatched CRUSH ids
crush_decode() stores bucket data by array slot, and the mapper later
derives the per-bucket workspace index from the decoded bucket id. A
malformed map can therefore make one bucket reuse another bucket's
workspace by encoding an id different from -1 - slot.
For uniform buckets, the second replica selection expands the source
bucket's permutation into that aliased workspace buffer. If the source
bucket is larger than the aliased bucket, the write runs past the smaller
permutation array and can escape the kvmalloc'd CRUSH workspace. KASAN
reports a slab OOB write of 4 bytes in bucket_perm_choose().
Reject buckets whose encoded id does not match their array slot. Valid
CRUSH maps already use the canonical negative id corresponding to the
bucket slot, so this restores the invariant expected by
work->work[-1 - in->id] without changing valid map behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock
list_for_each_entry() iterates ci->i_cap_flush_list but drops
i_ceph_lock to send cap messages. During the unlock window,
handle_cap_flush_ack() can acquire i_ceph_lock, detach cf entries
with tid <= flush_tid from the list, release i_ceph_lock, and free
them via ceph_free_cap_flush() outside any lock. When the original
thread reacquires i_ceph_lock and the for-loop macro advances via
cf = list_next_entry(cf, i_list), it dereferences cf->i_list.next
on freed memory.
The race timeline:
__kick_flushing_caps() handle_cap_flush_ack()
----------------------- -----------------------
holds i_ceph_lock <---
iterates to cf (tid=10)
prepares FLUSH message
drops i_ceph_lock <---
__send_cap() ── FLUSH(tid=10)
MDS sends FLUSH_ACK(tid=10)
---> acquires i_ceph_lock
cf->tid(10) <= flush_tid(10),
detaches cf from i_cap_flush_list
drops i_ceph_lock
ceph_free_cap_flush(cf) <- frees it!
acquires i_ceph_lock <---
for-loop advances:
cf = list_next_entry(cf, i_list)
-- UAF on freed cf->i_list.next
The cf was just sent by __kick_flushing_caps itself via __send_cap().
The MDS may respond with FLUSH_ACK quickly enough that
handle_cap_flush_ack() frees cf before __kick_flushing_caps can
finish the iteration.
Fix by converting to a manual while loop: save the next pointer
under i_ceph_lock before dropping it, then use the saved pointer
after reacquiring, so the potentially-freed cf is never accessed again. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: reject export_targets ranks >= CEPH_MAX_MDS in mdsmap decode
MDSMap export_targets entries are monitor controlled. check_new_map()
uses each entry as a bit number in a fixed stack bitmap, so a rank
outside the protocol namespace can make set_bit() write past the end of
the array.
Reject ranks outside CEPH_MAX_MDS while decoding the map. Do not
validate against possible_max_rank here because maps may legitimately
reference ranks beyond a temporarily reduced max_mds. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound xattr value length in __build_xattrs()
__build_xattrs() decodes the MDS-supplied xattr blob one attribute at a
time. For each attribute it reads a 32-bit name length, advances past the
name bytes, reads a 32-bit value length, records the value pointer, and
advances past the value bytes. The two length fields are read with
ceph_decode_32_safe(), but the value bytes themselves are advanced over
with a bare "p += len" and no ceph_decode_need() check that "len" bytes
remain in the blob.
For every attribute except the last, the next iteration's
ceph_decode_32_safe() on the following name length implicitly verifies
that the previous value did not run past the blob end. The final
attribute has no successor, so its decoded value length is never checked
against the blob bounds. A malicious or compromised metadata server can
set the last attribute's value length larger than the bytes actually
present in the blob.
The blob is a dedicated kvmalloc() allocation sized to the wire length
(ceph_buffer_new() in ceph_fill_inode()). __set_xattr() records the
oversized length in xattr->val_len verbatim, and a later getxattr(2) runs
memcpy(value, xattr->val, xattr->val_len) into a user-supplied buffer,
copying bytes past the end of the allocation back to user space.
Impact: a malicious metadata server discloses adjacent kernel heap bytes
to a local user via getxattr(2) on a CephFS file. Add the missing
ceph_decode_need() so an out-of-bounds value length on the final
attribute fails the decode and returns -EIO instead of being stored. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: avoid dropping live tree ref on fsnotify rule autoremove
audit_del_rule() is used for both netlink deletion templates and internal
fsnotify autoremove. The former passes a parsed template which owns a
temporary tree reference; the latter passes the installed entry itself.
The unconditional audit_put_tree() at the end of audit_del_rule() assumes
the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify
autoremove event therefore drops the installed rule's live tree reference.
Repeating this across rules sharing the same tree can free the tree while
another rule still references it, and a later autoremove dereferences the
freed pathname while comparing rules.
Move the temporary-tree put to audit_rule_change(), the caller that owns
deletion templates. Keep it in the AUDIT_DEL_RULE cleanup so both
successful deletion and -ENOENT still release the parser-owned tree.
[PM: dropped unnecessary comment for line length reasons] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear ce->tgthint in free_tgts()
When free_tgts() frees all structures in ce->tlist, ce->tgthint
is left pointing to one of the freed cache_dfs_tgt structures.
If ce->tgthint is not reset before it is used later, it results
in a use-after-free.
Set ce->tgthint to NULL in free_tgts() after the elements are
freed to reflect that no elements remain. |
