Export limit exceeded: 26069 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26069 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98433 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix secure device page leak on uv_page_in() failure In kvmppc_svm_page_in(), if uv_page_in() fails after kvmppc_uvmem_get_page() has succeeded, the secure device page is never released. kvmppc_uvmem_get_page() sets a bit in kvmppc_uvmem_bitmap, allocates a kvmppc_uvmem_page_pvt struct, marks the GFN as KVMPPC_GFN_UVMEM_PFN, and calls zone_device_page_init() which sets refcount=1 and locks the page. The subsequent goto out_finalize skips the *mig.dst assignment, so migrate_vma_finalize() is a no-op for the page, and none of those resources are ever reclaimed. Each occurrence permanently consumes one entry from the firmware-bounded secure memory pool (kvmppc_uvmem_bitmap), leaks pvt, and leaves the GFN marked as secure — making it unusable for the lifetime of the VM. The twin __kvmppc_svm_page_out() already handles the analogous uv_page_out() failure correctly with unlock_page(dpage); __free_page(dpage). Apply the same pattern here: unlock_page() followed by put_page(), which chains through free_zone_device_folio() into kvmppc_uvmem_folio_free() to clear the bitmap bit, free pvt, and reset the GFN state. Reachable whenever uv_page_in() returns an error (e.g. UV pool exhaustion) on any POWER9/10 + Ultravisor/PEF system. | ||||
| CVE-2026-89711 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: remove flawed WARN_ON_ONCE from nfsd_mode_check The header for commit e75b23f9e323 ("nfsd: check d_can_lookup in fh_verify of directories") details the assumption that justified adding the WARN_ON_ONCE to nfsd_mode_check(), that assumption is invalid (in the case of NFS reexport). When NFSD exports an NFS filesystem it is very possible for nfsd_mode_check() to encounter a @dentry that doesn't have i_op->lookup (see nfs_fhget()'s NFS_ATTR_FATTR_MOUNTPOINT and NFS_ATTR_FATTR_V4_REFERRAL handling, and d_flags_for_inode()). So remove nfsd_mode_check()'s WARN_ON_ONCE(). The nfserr_notdir return on that branch must stay. It guards the subsequent lookup_one_unlocked() -> __lookup_slow() path, which calls inode->i_op->lookup() with no NULL check, so returning nfserr_notdir is what keeps a client LOOKUP into such a @dentry from dereferencing a NULL method pointer. | ||||
| CVE-2026-98817 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SDCA: Add better pm_runtime error handling in func probe Add a common error path in probe that balances the runtime PM reference. | ||||
| CVE-2026-98418 | 1 Linux | 1 Linux Kernel | 2026-10-17 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/core: Avoid false migration warning for proxy donors Proxy execution can move a blocked donor's scheduling context to the lock owner's CPU even when the donor is migration-disabled. The donor does not execute there, and its original execution CPU remains recorded in wake_cpu. set_task_cpu() warns unconditionally for migration-disabled tasks, so a subsequent proxy migration or the wakeup path returning the donor home triggers a false positive: moving a blocked scheduling context does not violate the migration-disabled execution context. For example, creating a mutex owner on CPU1 and a migration-disabled waiter on CPU0 can trigger the following warning: proxy_migrate_repro: donor blocking on CPU0 with migration disabled proxy_migrate_repro: donor moved from CPU0 to CPU1 WARNING: kernel/sched/core.c:3389 at set_task_cpu+0x1d3/0x280 ... Call Trace: try_to_wake_up+0x43f/0x780 __mutex_unlock_slowpath+0x330/0x540 owner_fn+0x9f/0xc0 [proxy_migrate_repro] ... proxy_migrate_repro: donor woke on CPU0, task_cpu=0 proxy_migrate_repro: completed Exclude blocked proxy donors from the warning. The proxy wakeup path restores an executable placement before clearing the blocked state. | ||||
| CVE-2026-98406 | 1 Linux | 1 Linux Kernel | 2026-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid WARN in set_bitrate_mask when sdata not in driver ieee80211_set_bitrate_mask() checks if the interface is running via ieee80211_sdata_running(), but it does not check if the interface is still present in the driver. When sdata is running but IEEE80211_SDATA_IN_DRIVER is not set, the call reaches drv_set_bitrate_mask() in driver-ops.h which hits wlan1: Failed check-sdata-in-driver check, flags: 0x0 WARNING: net/mac80211/driver-ops.h:884 at drv_set_bitrate_mask Syzkaller triggers this via wext SIOCSIWRATE ioctl. The Call Trace shows wext_ioctl_dispatch() in wext-core.c dispatching the ioctl, calling ioctl_standard_call() for SIOCSIWRATE, which calls cfg80211_wext_siwrate() in wext-compat.c. That builds a bitrate mask and calls rdev_set_bitrate_mask() which ends up in ieee80211_set_bitrate_mask() in cfg.c. The interface is marked running via SDATA_STATE_RUNNING but flags is 0, so check_sdata_in_driver() fails. When the interface is being torn down, or when wext ioctl is issued during interface bringup before drv_add_interface() sets IN_DRIVER, the running check passes while IN_DRIVER is clear. Check IEEE80211_SDATA_IN_DRIVER in ieee80211_set_bitrate_mask() before calling the driver, returning -ENETDOWN. This avoids the WARN_ONCE in driver-ops.h and matches other cfg.c operations that bail early when not in driver. This change should be safe because wiphy mutex is held in cfg80211_wext_siwrate() via guard(wiphy), and IN_DRIVER is set/cleared under RTNL and wiphy paths in drv_add_interface() and drv_remove_interface() in driver-ops.c, so the check is race-free against driver add/remove. Returning -ENETDOWN is the same error other not-running paths use and does not introduce new locking. [also add second syzbot report] | ||||
| CVE-2026-98407 | 1 Linux | 1 Linux Kernel | 2026-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: fix heap OOB write on key removal When a key is removed (data == NULL), rsi_hal_load_key() runs: memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ); set_key is a struct rsi_set_key *, so the subscript is scaled by sizeof(struct rsi_set_key) (160 bytes): &set_key[FRAME_DESC_SZ] is skb->data + 2560, and the memset writes 144 zero bytes starting 2.4KB past the end of the 160-byte skb data buffer, corrupting unrelated heap objects. The intended byte offset would have been (u8 *)set_key + FRAME_DESC_SZ. The write fires on every DISABLE_KEY callback, so plain disconnects, roams and interface teardowns trigger it on real networks. The memset is redundant: the whole buffer is zeroed right after allocation, so the frame sent to the device is byte-identical without it. Drop the else branch; normal operation is unaffected. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-98417 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: xfrm: reject unrepresentable espintcp transport headers ESP-in-TCP can hand xfrm packets whose transport header offset no longer fits after the stream parser trims the TCP envelope. The plain transport header reset truncates that offset and triggers the skb warning path. Use the careful transport-header helper and drop the skb through the existing XFRM error path when the offset cannot be represented. | ||||
| CVE-2026-98397 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: x86-android-tablets: hold device reference for secondary fwnode teardown In gpio_secondary_fwnode_init(), acpi_bus_find_device_by_name() returns a device reference, but the local dev variable is declared with __free(put_device), dropping the reference at the end of each iteration. Meanwhile, devm_add_action_or_reset() saves the dev pointer for gpio_secondary_unset() without incrementing its reference count, which could lead to a use-after-free during driver teardown if the device is released in the interim. Acquire an explicit device reference with get_device() when registering the devres action, and drop it with put_device() inside gpio_secondary_unset(). | ||||
| CVE-2026-89708 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown After a DESTROY_SESSION the per-session teardown path can free a session while rpciod still holds an inflight callback rpc_task that dereferences clp->cl_cb_session. nfsd4_probe_callback_sync() flushes cl_callback_wq, but once nfsd4_run_cb_work() has called rpc_call_async() the rpc_task lives on rpciod; flushing the workqueue does not wait for it. rpc_shutdown_client() does drain rpciod tasks, but uses a 1-second wait_event_timeout — tasks stuck in rpc_delay() (e.g. 2-second NFS4ERR_DELAY retries) can outlive the drain. destroy path rpciod ------------ ------ unhash_session(ses) nfsd4_probe_callback_sync(clp) flush_workqueue(cl_callback_wq) /* returns; rpc_task still live */ nfsd4_put_session_locked(ses) free_session(ses) -> kfree(ses) nfsd4_cb_sequence_done() reads cb_clp->cl_cb_session /* freed slab */ A second window exists in nfsd4_process_cb_update(). When __nfsd4_find_backchannel() returns NULL because unhash_session() has already removed the destroyed session from cl_sessions, setup_callback_client() takes the v4.1 early return so clp->cl_cb_session = ses never fires and the field retains a pointer to the about-to-be-freed session. Fix both by converting cl_cb_session to an RCU-protected pointer: - Move the cl_cb_session = ses assignment in setup_callback_client() to after rpc_create() succeeds, so it is only published when a working backchannel exists. Clear cl_cb_session on the error return in nfsd4_process_cb_update(). Both stores use rcu_assign_pointer(). - Annotate cl_cb_session with __rcu. All rpciod-side readers use rcu_read_lock()/rcu_dereference() and check for NULL, bailing to the appropriate error or requeue path: encode_cb_sequence4args(), decode_cb_sequence4resok(), nfsd41_cb_get_slot(), nfsd41_cb_release_slot(), nfsd4_cb_prepare(), and nfsd4_cb_sequence_done(). - Switch __free_session() from kfree() to kfree_rcu() so the session slab is not reclaimed until after an RCU grace period, guaranteeing that rpciod readers inside rcu_read_lock() never dereference freed memory. - Pass the session pointer to the nfsd_cb_seq_status and nfsd_cb_free_slot tracepoints instead of having them re-read cl_cb_session. - nfsd4_cb_prepare() calls rpc_exit() when the session is NULL, routing through the done/release path to requeue the callback. | ||||
| CVE-2026-89699 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: validate symlink target length in NFSv4 CREATE nfsd4_decode_create() accepts an unbounded cr_datalen from the wire for NF4LNK symlink targets, allowing a client to force a kmalloc of up to the maximum RPC payload size (several MiB) per COMPOUND op that persists until compound teardown. The VFS rejects oversized targets with ENAMETOOLONG, but the allocation has already occurred. Reject cr_datalen == 0 early with nfserr_inval and cr_datalen greater than NFS4_MAXPATHLEN (PATH_MAX) with nfserr_nametoolong to bound the allocation. | ||||
| CVE-2026-89697 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: add fh_want_write() for early-verified SETATTR in nfsd_proc_setattr() The BOTH_TIME_SET branch calls fh_verify() early so setattr_prepare() can inspect the dentry. This causes nfsd_setattr() to skip fh_want_write(), so notify_change() runs without a mount write reference. Add the missing fh_want_write() call after the early fh_verify(). | ||||
| CVE-2026-89675 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix UAF in async copy cancel and shutdown An async copy could be freed or used after free while a teardown caller (OFFLOAD_CANCEL, nfsd4_shutdown_copy, nfsd4_cancel_copy_by_sb) raced the copy kthread: - find_async_copy() bumped copy->refcount but left the copy on clp->async_copies, so the reaper's cleanup_async_copy() could run release_copy_files() concurrently with a cancel/shutdown caller. Both put and NULL nf_src/nf_dst without a common lock, double-putting the nfsd_file and freeing it early. - nfsd4_do_async_copy() set NFSD4_COPY_F_STOPPED before its final uses of the copy (nfsd_update_cmtime_attr() on copy->nf_dst, nfsd4_send_cb_offload()). nfsd4_stop_copy() treats a set STOPPED bit as "kthread done, skip kthread_stop()", so a teardown caller ran release_copy_files() -- which puts and NULLs nf_dst -- while the kthread still dereferenced it (NULL/UAF). - copy->copy_task was never pinned. The one-shot kthread self-reaps on return, so kthread_stop()'s get_task_struct() could touch a freed task_struct. - co_cb is embedded in the copy, but nfsd4_send_cb_offload() held a reference only on the client, so a concurrent teardown could free the copy while the CB_OFFLOAD callback was in flight. Fix the teardown lifetime as a whole: - find_async_copy() unlinks the copy (clear cp_clp, list_del_init) under async_lock; the cancel, shutdown, and sb-cancel paths drop the list-membership reference via nfs4_put_copy() after nfsd4_stop_copy(). Drop the now-redundant list_del fixup from cleanup_async_copy(). - Because unlinking hides the copy from the reaper, its cleanup_async_copy() can no longer remove the copy's s2s_cp_stateids entry; the cancel/shutdown/sb-cancel paths now call nfs4_free_copy_state() themselves (while cp_clp is still valid) so the entry does not dangle at freed memory for the laundromat and manage_cpntf_state() to dereference. - Give the kthread its own reference, taken in nfsd4_copy() before wake_up_process() and dropped at the end of nfsd4_do_async_copy(); call wake_up_process() before list_add(). - Pin the task_struct with get_task_struct() in nfsd4_copy(), released in nfs4_put_copy(), so kthread_stop() is safe whenever the kthread exits. Set NFSD4_COPY_F_STOPPED only in nfsd4_stop_copy(), which now always kthread_stop()s before release_copy_files(); completion is still reported via NFSD4_COPY_F_COMPLETED, so nfsd4_has_active_async_copies() is unaffected. Each teardown caller removes the copy from clp->async_copies first, so kthread_stop() runs exactly once. - Take a copy reference in nfsd4_send_cb_offload(), dropped in nfsd4_cb_offload_release(). The kthread still holds its own reference there, so the refcount_inc() cannot race the final free. - Read cp_clp with smp_load_acquire() to pair with the unordered set_bit()/clear_bit() writers (Documentation/atomic_bitops.rst). | ||||
| CVE-2026-89665 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: reject out-of-range useconds in NFSv2 SETATTR/CREATE The NFSv2 sattr decoder converts the wire useconds to nanoseconds in svcxdr_decode_sattr(): iap->ia_atime.tv_nsec = tmp2 * NSEC_PER_USEC; tmp2 is a u32 and NSEC_PER_USEC is 1000, so the product is computed in unsigned long. On ILP32 that is 32 bits, and an out-of-range useconds value such as 4294968 wraps to tv_nsec == 704. The corruption therefore happens during decode, before any proc function can inspect the value, and a later range check on tv_nsec would see an in-range result and accept it. Rejecting in the decoder yields an RPC GARBAGE_ARGS reply. NFSv2 defines no NFSERR_INVAL, so there is no NFS-level status to return for a malformed time argument, and the check cannot move to the proc function the way the v3/v4 nsec range checks do. Guard the raw useconds before the multiplication and reject values greater than 1000000. useconds == 1000000 is kept: it is the Sun convention for "set to the current server time", and the in-tree Linux NFSv2 client emits it in both the atime and the mtime field for a plain touch / utimes(file, NULL) (see encode_sattr() and xdr_encode_current_server_time() in fs/nfs/nfs2xdr.c). Rejecting 1000000 would turn that common operation into a hard decode failure for both SETATTR and CREATE. 1000000 * NSEC_PER_USEC is 10^9, which does not wrap on ILP32, so the Sun convention value passes through safely. Only genuinely out-of-range values (> 1000000) are rejected. The atime and mtime guards are therefore symmetric. The decoder only applied the Sun convention in the mtime block, which clears ATTR_ATIME_SET|ATTR_MTIME_SET when mtime useconds == 1000000. If a client puts 1000000 in the atime field but not in the mtime field, the atime block stored an out-of-range tv_nsec (10^9) and left ATTR_ATIME_SET set, so the bogus value reached the filesystem. Apply the convention in the atime block as well, clearing ATTR_ATIME_SET so the server uses its current time and ignores the value. Only ATTR_ATIME_SET is cleared there. The mtime block keeps its existing behavior, where 1000000 means "set both atime and mtime to now". [ cel: various tweaks, addenda, and clean-ups ] | ||||
| CVE-2026-89662 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent lock owner use-after-free during client teardown __destroy_client() releases a client's open owners, but a lock owner whose only reference is a blocked lock (nbl) stays on cl_ownerstr_hashtbl. client_has_state() does not count a bare owner, so DESTROY_CLIENTID can reach __destroy_client() with such owners present. __destroy_client() then walks the table, calling remove_blocked_locks() on each owner without a reference. Freeing a blocked lock drops the owner reference held via flc_owner. The per-net laundromat reaps blocked locks from nn->blocked_locks_lru independently of client state. The two paths share blocked_locks_lock only for the list splice, not the owner's lifetime. The laundromat therefore frees the owner as __destroy_client() dereferences it, a NULL dereference in remove_blocked_locks(). nfsd4_release_lockowner() holds a reference across the same call; __destroy_client() does not. Hold cl_lock across the walk, taking a reference and unhashing each owner, then drop it before remove_blocked_locks() and nfs4_put_stateowner(), which take blocked_locks_lock and cl_lock. | ||||
| CVE-2026-89656 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: reject buckets with mismatched CRUSH ids crush_decode() stores bucket data by array slot, and the mapper later derives the per-bucket workspace index from the decoded bucket id. A malformed map can therefore make one bucket reuse another bucket's workspace by encoding an id different from -1 - slot. For uniform buckets, the second replica selection expands the source bucket's permutation into that aliased workspace buffer. If the source bucket is larger than the aliased bucket, the write runs past the smaller permutation array and can escape the kvmalloc'd CRUSH workspace. KASAN reports a slab OOB write of 4 bytes in bucket_perm_choose(). Reject buckets whose encoded id does not match their array slot. Valid CRUSH maps already use the canonical negative id corresponding to the bucket slot, so this restores the invariant expected by work->work[-1 - in->id] without changing valid map behavior. | ||||
| CVE-2026-89655 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock list_for_each_entry() iterates ci->i_cap_flush_list but drops i_ceph_lock to send cap messages. During the unlock window, handle_cap_flush_ack() can acquire i_ceph_lock, detach cf entries with tid <= flush_tid from the list, release i_ceph_lock, and free them via ceph_free_cap_flush() outside any lock. When the original thread reacquires i_ceph_lock and the for-loop macro advances via cf = list_next_entry(cf, i_list), it dereferences cf->i_list.next on freed memory. The race timeline: __kick_flushing_caps() handle_cap_flush_ack() ----------------------- ----------------------- holds i_ceph_lock <--- iterates to cf (tid=10) prepares FLUSH message drops i_ceph_lock <--- __send_cap() ── FLUSH(tid=10) MDS sends FLUSH_ACK(tid=10) ---> acquires i_ceph_lock cf->tid(10) <= flush_tid(10), detaches cf from i_cap_flush_list drops i_ceph_lock ceph_free_cap_flush(cf) <- frees it! acquires i_ceph_lock <--- for-loop advances: cf = list_next_entry(cf, i_list) -- UAF on freed cf->i_list.next The cf was just sent by __kick_flushing_caps itself via __send_cap(). The MDS may respond with FLUSH_ACK quickly enough that handle_cap_flush_ack() frees cf before __kick_flushing_caps can finish the iteration. Fix by converting to a manual while loop: save the next pointer under i_ceph_lock before dropping it, then use the saved pointer after reacquiring, so the potentially-freed cf is never accessed again. | ||||
| CVE-2026-89653 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: reject export_targets ranks >= CEPH_MAX_MDS in mdsmap decode MDSMap export_targets entries are monitor controlled. check_new_map() uses each entry as a bit number in a fixed stack bitmap, so a rank outside the protocol namespace can make set_bit() write past the end of the array. Reject ranks outside CEPH_MAX_MDS while decoding the map. Do not validate against possible_max_rank here because maps may legitimately reference ranks beyond a temporarily reduced max_mds. | ||||
| CVE-2026-89649 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound xattr value length in __build_xattrs() __build_xattrs() decodes the MDS-supplied xattr blob one attribute at a time. For each attribute it reads a 32-bit name length, advances past the name bytes, reads a 32-bit value length, records the value pointer, and advances past the value bytes. The two length fields are read with ceph_decode_32_safe(), but the value bytes themselves are advanced over with a bare "p += len" and no ceph_decode_need() check that "len" bytes remain in the blob. For every attribute except the last, the next iteration's ceph_decode_32_safe() on the following name length implicitly verifies that the previous value did not run past the blob end. The final attribute has no successor, so its decoded value length is never checked against the blob bounds. A malicious or compromised metadata server can set the last attribute's value length larger than the bytes actually present in the blob. The blob is a dedicated kvmalloc() allocation sized to the wire length (ceph_buffer_new() in ceph_fill_inode()). __set_xattr() records the oversized length in xattr->val_len verbatim, and a later getxattr(2) runs memcpy(value, xattr->val, xattr->val_len) into a user-supplied buffer, copying bytes past the end of the allocation back to user space. Impact: a malicious metadata server discloses adjacent kernel heap bytes to a local user via getxattr(2) on a CephFS file. Add the missing ceph_decode_need() so an out-of-bounds value length on the final attribute fails the decode and returns -EIO instead of being stored. | ||||
| CVE-2026-89643 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: audit: avoid dropping live tree ref on fsnotify rule autoremove audit_del_rule() is used for both netlink deletion templates and internal fsnotify autoremove. The former passes a parsed template which owns a temporary tree reference; the latter passes the installed entry itself. The unconditional audit_put_tree() at the end of audit_del_rule() assumes the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify autoremove event therefore drops the installed rule's live tree reference. Repeating this across rules sharing the same tree can free the tree while another rule still references it, and a later autoremove dereferences the freed pathname while comparing rules. Move the temporary-tree put to audit_rule_change(), the caller that owns deletion templates. Keep it in the AUDIT_DEL_RULE cleanup so both successful deletion and -ENOENT still release the parser-owned tree. [PM: dropped unnecessary comment for line length reasons] | ||||
| CVE-2026-89636 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: clear ce->tgthint in free_tgts() When free_tgts() frees all structures in ce->tlist, ce->tgthint is left pointing to one of the freed cache_dfs_tgt structures. If ce->tgthint is not reset before it is used later, it results in a use-after-free. Set ce->tgthint to NULL in free_tgts() after the elements are freed to reflect that no elements remain. | ||||