| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in CRI-O checkpoint restore allows a user who can create a pod from a malicious checkpointed container to bypass the destination Kubernetes security context. The restored process may retain credentials, Linux capabilities, no_new_privs, and seccomp state from the checkpoint instead of enforcing the destination configuration. This can allow execution with elevated privileges across the container security boundary.
Affected upstream supported versions are CRI-O 1.34 and later. Downstream Red Hat products are affected from OCP 4.17 onward. Fixes have been applied to supported branches but are not yet released.
Exploitation requires permission to create a pod from a malicious checkpoint image and checkpoint restore functionality to be available. |
| A NULL pointer dereference flaw was found in GStreamer's RTSP support library. The vulnerability occurs while parsing an Authorization or WWW-Authenticate header that uses Digest authentication. Specially crafted whitespace placement around a parameter's terminator can cause an internal length calculation to underflow, leading to a crash of the process parsing the header. On an RTSP server this can be triggered by a remote, unauthenticated attacker sending a single malformed request when the server has authentication enabled; the same flaw can also be triggered against an RTSP client by a malicious or compromised RTSP server. Successful exploitation results in a denial of service (application crash) and has no confirmed impact on confidentiality or integrity. |
| A heap-based buffer overflow was found in Corosync's Totem Process Group (totempg) message reassembly. When processing fragmented multicast messages, the buffer used to reassemble fragments lacks a runtime bounds check in release builds. A network-adjacent attacker able to send crafted multicast protocol messages to the cluster could cause a heap buffer overflow with attacker-controlled data. This can crash the Corosync daemon, causing a denial of service to the entire cluster, and may potentially allow further exploitation given sufficient heap-corruption control. |
| A flaw was found in libkcapi. A local attacker can influence an application that uses the Asynchronous Input/Output (AIO) interface. By reusing an AIO-enabled handle after a prior completion error, the _kcapi_aio_read_all() function can enter a non-terminating wait loop. This can lead to a persistent denial of service, making the affected application or thread unresponsive. |
| Memory Corruption via Uncanceled AIO Requests on Error: libkcapi's one-shot AIO path can return an error before all submitted IOCBs are drained, allowing later kernel writes into caller-owned output buffers. |
| A flaw was found in libkcapi. When performing one-shot symmetric cipher operations on large inputs (over 64 KiB) in stateful modes such as Counter (CTR) or Cipher Block Chaining (CBC), the library improperly reuses the Initialization Vector (IV) for each internal data chunk. A remote attacker could potentially exploit this by making an application that uses libkcapi process specially crafted large inputs. This can lead to a significant weakening of data confidentiality, as the repeated IV use can expose relationships in encrypted plaintext, and may also affect data integrity by causing incorrect cryptographic processing. |
| Two case-insensitive comparisons on request-derived usernames outside the main authorization path in CUPS's scheduler (printer ACL validation and private-attribute filtering) could allow bypass of username-based access controls in certain configurations. |
| A flaw was found in Vim's netrw plugin. A crafted filename containing quote characters and expression fragments can break out of the quoted context during mark/unmark operations, allowing arbitrary Vimscript execution. This can be leveraged to run shell commands with the privileges of the user running Vim. |
| A flaw was found in QEMU. The VAPIC setup hypercall in hw/i386/vapic.c does not validate that the writable RAM alias remains within the option ROM window. A privileged guest user on a Q35/KVM machine can position this alias over locked SMRAM, bypassing chipset D_LCK protection and injecting code into System Management Mode memory. |
| A flaw was found in `cockpit-machines`. This vulnerability allows a local attacker with the ability to inspect running processes to expose sensitive guest virtual machine (VM) credentials, such as `rootPassword` and `userPassword`. This occurs when the `install_machine.py` script passes these credentials as a JSON command-line argument during VM creation or installation. The exposure is limited to the period when the installation workflow is active and depends on host process-visibility policies. |
| A heap out-of-bounds write vulnerability was found in the GStreamer gst-plugins-bad adpcmdec element when decoding IMA/DVI ADPCM audio. Insufficient validation of the per-block sample count for multi-channel streams allows a crafted WAV file to cause writes beyond the allocated output buffer. This can lead to application crash, denial of service, memory corruption, or potentially arbitrary code execution when untrusted media is processed. |
| A flaw was found in the containers/storage library. A crafted tar archive containing a malicious whiteout header (e.g. victim/.wh.) can cause the extraction destination directory to be replaced with an arbitrary file when processed by storage/pkg/archive.UnpackLayer, ApplyLayer, or ApplyUncompressedLayer. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Networking). Supported versions that are affected are Oracle Java SE: 8u501, 11.0.32, 17.0.20, 21.0.12, 25.0.4, 26.0.2; Oracle GraalVM for JDK: 17.0.20 and 21.0.12; Oracle GraalVM Enterprise Edition: 21.3.19. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. While the vulnerability is in Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 6.8 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:N/A:N). |
| A flaw was found in gss-ntlmssp. A memory leak occurs in the NTLM target-info parser when a crafted NTLM CHALLENGE message contains duplicated string-valued AV_PAIR entries. The parser allocates memory for each string value but does not free the previous allocation when the same AV_PAIR type appears more than once, leaking the earlier allocation. A malicious or man-in-the-middle server can exploit this to cause gradual memory exhaustion on the client during NTLM authentication, leading to a denial of service. |
| A flaw was found in GIMP's PSP (Paint Shop Pro) file loader. When processing a compressed selection channel, a heap-based buffer overflow can occur due to a mismatch between the allocated buffer size and the amount of data decompressed. A remote attacker could exploit this vulnerability by crafting a malicious PSP file. Opening this file in GIMP could lead to a crash or arbitrary code execution. |
| A flaw was found in jwcrypto. The JWK.import_key() function validates the key_ops JWK member for duplicate values using an algorithm with O(n^2) time complexity, and the length of key_ops is not bounded. A remote, unauthenticated attacker can supply a JWK with a large key_ops array to an application that passes attacker-controlled key material to a public key-import API (reachable via ECDH-ES key agreement, OIDC dynamic client registration, DPoP, or ACME account key registration, among others) to consume excessive CPU time, resulting in a denial of service. |
| Multiple integer overflow and underflow vulnerabilities were found in the GStreamer gst-plugins-ugly ASF demuxer (asfdemux) when parsing header objects from crafted ASF, WMV, or WMA files. Insufficient validation of attacker-controlled length and size values can bypass bounds checks and cause out-of-bounds heap reads. This can result in application crash, denial of service, or limited information disclosure when untrusted media is processed. |
| A flaw was found in PackageKit. PackageKit skips the polkit authorization check for transactions carrying the SIMULATE (dry-run) flag. In the dnf5 backend, the RepoRemove handler ignores that contract and always executes the real transaction because its guard is written as (role == REPO_REMOVE || !SIMULATE), which is always true for RepoRemove. An unprivileged local user can therefore perform a genuine package uninstall while claiming to simulate. This vulnerability only affects systems using PackageKit with the dnf5 backend. |
| A symlink-following flaw was found in libvirt's qemuTPMEmulatorPrepareHost() function. The function uses a path-based chown() on the swtpm logfile without checking for symbolic links. A local attacker with access to the swtpm account can replace the logfile with a symlink, causing libvirtd (running as root) to transfer ownership of an arbitrary file to the swtpm user. |
| A privilege escalation flaw was found in the scan_mysql actor of leapp-upgrade-el9toel10 (provided by leapp-repository). During RHEL 9 to RHEL 10 upgrades, the actor runs:
mysqld --validate-config --log-error-verbosity=2 directly as root in the Leapp actor context, bypassing the packaged MySQL systemd unit that normally starts the daemon as User=mysql.
A process compromised as the mysql OS identity can write a version-2 persisted configuration (mysqld-auto.cnf) and a malicious shared object into /var/lib/mysql (a directory owned by mysql). That persisted map can set plugin_dir to /var/lib/mysql and early_plugin_load (or related loader options such as plugin_load / plugin_load_add) so MySQL loads the attacker-controlled object during configuration validation. Plugin loading can reach dlopen() before MySQL’s runtime-user check and before plugin-symbol validation.
When an administrator subsequently runs the documented Leapp preupgrade or upgrade workflow, attacker-controlled code can execute as UID 0 with a full capability set in an unconfined SELinux domain (unconfined_t). The attack does not require write access to the default system plugin path under /usr; redirecting plugin_dir via mysql-owned persisted state is sufficient. Ordinary SQL privileges alone (including highly privileged SQL accounts) are not a sufficient startpoint — OS-level execution as the mysql service identity is required, plus later administrator invocation of Leapp. |
