| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ImageMagick 7.1.0-20 before 7.1.2-32 contains a use after free vulnerability in the -fx option that occurs when a memory allocation fails during a specific operation. Attackers who can supply crafted -fx expressions under memory pressure can trigger freed memory access, causing crashes or memory corruption. |
| Sandbox escape due to use-after-free in the DOM: Content Processes component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, Firefox ESR 115.42, and Firefox ESR 140.17. |
| The Salty documentation repository builds and deploys the docs.saltbox.dev website. Prior to commit 649c9aea2daef1168eeb0415b44e65dbbde9f220, .github/workflows/trigger-pr-build.yml records an untrusted fork commit in the pr_info artifact, and the secret-bearing workflow_run job in .github/workflows/build-pr.yml checks out that commit before running pip install -r requirements.txt. A fork pull request can therefore supply attacker-authored setup.py or PEP 517 build hooks whose installation code executes in the privileged base-repository workflow with CF_API_TOKEN, GH_TOKEN, MKDOCS_GIT_COMMITTERS_APIKEY, and a write-capable GITHUB_TOKEN, allowing secret disclosure and follow-on compromise. The vulnerability is not caused by the repository-fork guard, and the demonstrated path requires attacker control of fork content rather than merely the artifact metadata. This vulnerability is fixed with commit 649c9aea2daef1168eeb0415b44e65dbbde9f220. |
| FreeRDP 2.1.0 before 3.32.0 contains a use-after-free vulnerability in the static rdpsnd channel disconnect path, which frees audio formats and device without joining play_thread. A malicious RDP server can disconnect while asynchronous Wave2 playback processes queued PDUs, causing the client to read freed heap memory and crash. |
| Gitea Actions decided whether a fork pull request run needed approval based on the user who triggered the event rather than the pull request author. For `pull_request` activity triggered by a maintainer during ordinary triage, such as adding a label, the run was created without requiring approval, while the workflow definition was still taken from the fork head. Where Actions is enabled and a matching runner is registered, fork-controlled workflow code could run on the base repository's runners without an explicit approval. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Inclusion of Functionality from Untrusted Control Sphere vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges, Filesystem access for attacker, and Remote execution. |
| ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains a use after free vulnerability in the PDF writer when writing CMYK images with JPEG2000 compression. Attackers can supply a crafted CMYK image that, when written to PDF with JPEG2000 compression, causes freed memory to be reused, potentially crashing the process. |
| Use-after-free in the DOM: UI Events & Focus Handling component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 153.4, and Firefox 157. |
| ImageMagick 7.1.2-30 before 7.1.2-32 contains a use after free vulnerability in the WBINFO decoder that occurs when a memory allocation fails during image decoding. Attackers can supply a crafted image that, when decoded under memory allocation failure conditions, causes freed memory to be reused, crashing the application. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/cache: Decouple sched_cache_group from mm to fix UAF
Currently the sched cache grouping is by mm and the scheduling statistics
sched_cache_stat lives in the mm structure. This ties the life cycle
of scheduling stats with mm.
In account_mm_sched(), the scheduling stats are accessed by
task->mm->sc_stat. However, a task may be switching mm on one CPU when
another CPU is running account_mm_sched(), and possibly accessing the
old mm that was freed. This problem was found when running tests with
KASAN by Hyunwoo:
https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/
Instead of serializing the mm access by introducing extra acquisition of
rq lock in the mm free path, extract sched_cache_stat from mm_struct,
rename it as sched_cache_group and manage its life cycle apart from
mm_struct with its own ref counting. This allows us in the next patch
access sched_cache_group directly from task, and add a refcount
on sched_cache_group when a task links to it. This prevents the use
after free issue when accessing stale and released old mm and its
sched cache stat a task switches to a new mm while account_mm_sched()
is done elsewhere.
The other benefit of this restructure is in the future, the grouping of
tasks to a LLC would have the flexibility to be associated with a user
defined grouping, or cgroup, cookie group, numa_group or others instead
of just with a single mm address space.
Rename sched_cache_stat to sched_cache_group and turn it into a refcounted
object allocated from mm_struct. The mm_struct now holds a pointer
(sched_cache_grp) to this object instead of embedding it. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: take commit root semaphore when iterating in mark_block_group_to_copy()
mark_block_group_to_copy() iterates over the commit root with
skip_locking=true. A concurrent transaction commit can swap and free
the commit root during iteration, causing use-after-free when
accessing extent buffers.
Fix it by using path->need_commit_sem to protect the commit root search. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: hibernate: pass HVC_SET_VECTORS args to the resume hvc
swsusp_arch_suspend_exit() reinstalls the restored kernel's hyp stub
vectors with an hvc, but never passes the arguments. x0 is not set to
HVC_SET_VECTORS and x1 is not set to the vector address, so the stub
dispatch falls through and returns without writing vbar_el2. EL2 is
left pointing at the trans_pgd copy of the vectors, a page that
swsusp_free() releases right after resume.
Set the arguments up the same way __hyp_set_vectors() does.
Without this fix, Vladimir was able to trigger a hang when resuming from
hibernation with CONFIG_PAGE_POISONING=y and page_poison=on. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferred callback will be late and will see the updated state. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mxl862xx: disable the stats poll on teardown
mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and
nothing stops it until dsa_register_switch() has returned an error to
mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a
poll that fires once .setup or a later step of dsa_tree_setup() has
failed walks freed ports. On shutdown the user ports stay registered,
and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic
with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag
before it was set queues the poll after cancel_delayed_work_sync() has
returned.
Arm the poll once .setup has succeeded and stop it from a .teardown op,
which DSA calls on unregister and after a failed registration, in both
cases before it frees the ports. Use disable_delayed_work_sync() there
and in shutdown(): it drains a running poll as the cancel did and turns
every later attempt to queue the work into a no-op, so the re-arm
cannot bring the poll back. remove() and the probe error path only set
WORK_STOPPED, which crc_err_work tests before it walks the ports. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: coredump: Quiesce dump work on unregister
hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers
queue dump_rx without holding an hdev reference. Unregister leaves both
works live, so disconnecting during an active dump lets them access hdev
after hci_release_dev() frees it.
Shut down coredump processing during unregister. Close the producer gate
under dump_q.lock before disabling both works, then free the active buffer
and queued packets under hci_dev_lock. Serializing the gate with enqueue
prevents controller-specific workers from adding packets after the final
purge. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Use managed KMS polling to fix UAF on unbind
vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides
no matching drm_kms_helper_poll_fini(). The output poll work stays
scheduled after unbind and runs on the freed drm_device:
# modprobe vc4; rmmod vc4; sleep 10
BUG: KASAN: slab-use-after-free in delayed_work_timer_fn
BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm]
Workqueue: events output_poll_execute [drm_kms_helper]
Allocated by task 171: __devm_drm_dev_alloc
Freed by task 262 (rmmod): drm_dev_put / component_del
Use drmm_kms_helper_poll_init() so polling is finalized with the device,
as other drivers do. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: devres: fix race between concurrent revokers
There is a potential race condition when two paths try to revoke a
Devres concurrently.
The driver core's devres_release_all() calls Revocable::revoke() via the
release callback, while Devres::drop() calls revoke_nosync() on another
CPU.
The revoker that does not claim the is_available swap returns
immediately, but the revoker that did may still be executing
drop_in_place() on the inner data. This can cause a use-after-free when
the other revoker's caller proceeds to drop adjacent resources that
drop_in_place() still references (e.g., Devres<DmaMappedSgt> racing with
SGTable freeing the backing sg_table and pages).
Fix this by adding a Completion. The release callback signals the
Completion after revoke() finishes, and Devres::drop() waits for it when
it loses the is_available swap. This ensures the wrapped object is fully
torn down before Devres::drop() returns. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: Cleanup POSIX timers right after de_thread()
A per-thread CPU timer holds a reference to the PID of the thread it is
attached to and, while it is armed, its node is queued in that thread's
posix_cputimers. The task is looked up by that PID.
When a non-leader thread exec()s, de_thread() changes which task owns
that PID. pid_task(timer->it.cpu.pid, PIDTYPE_PID) then returns NULL,
but the node is still queued on tsk, which is alive. timer_lock_sighand()
takes a failed lookup to mean that the node is already dequeued, so it
has nothing to undo.
begin_new_exec() calls posix_cpu_timers_exit(me) right after
exec_task_namespaces() and that removes the leftover node, so the state
normally stays invisible. But bprm->point_of_no_return is set before
de_thread(), so if unshare_files(), set_mm_exe_file(), exec_mmap() or
exec_task_namespaces() fails, the task dies before it gets there.
exit_itimers() then frees the k_itimer while its node is still queued,
and reaping tsk later erases that freed node from the rbtree.
In short:
the non-leader thread B the parent
timer_create(CLOCK_THREAD_CPUTIME_ID)
timer_settime()
arm_timer() // the node is queued on B
execve()
de_thread(B)
exchange_tids(B, leader) // B's PID now belongs to the leader
release_task(leader)
__exit_signal(leader)
posix_cpu_timers_exit(leader) // cleans leader's queue, not B's
__unhash_process(leader) // that PID has no task anymore
exec_mmap()
mmap_read_lock_killable(old_mm)
kill(B, SIGKILL)
// -EINTR
get_signal()
do_exit()
exit_itimers()
posix_timer_delete()
posix_cpu_timer_del()
posix_timer_unhash_and_free() // freed while still queued
wait4()
release_task(B)
posix_cpu_timers_exit(B)
cleanup_timerqueue()
timerqueue_del() // use-after-free
Move the POSIX timer cleanup right after de_thread() before any of the
later failure conditions brings the task into do_exit().
[ tglx: Move the cleanup right after de_thread() ] |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: do not free nlk->groups while lockless readers can use it
netlink_realloc_groups() uses krealloc() under netlink_table_grab().
Whenever NLGRPSZ(groups) lands in a different kmalloc bucket, the old
bitmap is freed immediately.
Two readers of nlk->groups / nlk->ngroups do not hold the netlink
table lock:
1) sk_diag_dump_groups(). Hashed (bound) sockets are dumped from the
rhashtable walk in __netlink_diag_dump(), which only holds RCU.
Only the mc_list part of the dump takes nl_table_lock.
2) netlink_native_seq_show() (/proc/net/netlink), whose walk has been
lockless since commit 21e4902aea80 ("netlink: Lockless lookup with
RCU grace period in socket release").
Both can read a freed buffer, and sk_diag_dump_groups() can also read
past the end of the old (smaller) buffer if it happens to load the old
@groups pointer together with the new @ngroups value, copying the
result into a NETLINK_DIAG_GROUPS attribute.
This is the same class of bug that commit f773608026ee ("netlink:
access nlk groups safely in netlink bind and getname") fixed for bind()
and getname(); these two readers were missed. Simply grabbing the table
lock in sk_diag_dump_groups() is not an option, because it is also
called with nl_table_lock already held from the mc_list section of the
dump.
Make the lockless readers safe instead:
- Allocate a new bitmap and free the old one after an RCU grace period,
instead of relying on the implicit kfree() done by krealloc().
- Publish @groups before @ngroups, both with release semantics, and have
the lockless readers load @ngroups first. A reader can then never pair
the new (bigger) size with the old (smaller) buffer, and a reader
picking up the new pointer while still seeing the old size is
guaranteed to see the initialized bitmap.
netlink_realloc_groups() is called from process context (bind() and
setsockopt()), so kfree_rcu_mightsleep() can be used, once the table
has been released. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/i2c: Disable IRQ on unbind
Currently, struct xe_i2c is freed before SGUnit IRQ is disabled in unbind
path, leaving a potential UAF in case I2C IRQ is hit during this small
window. Explicitly disable I2C IRQ in xe_i2c_remove() and fix this.
(cherry picked from commit 8ba5c8b8ab3fd362267c11df2cd5a90ee46f6e24) |
