| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Resource Locking vulnerability in the UTM processing of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When UTM WebFiltering is configured and the WebFiltering cloud server is unreachable, sustained HTTP traffic load may cause the UTM subsystem to crash and restart, which will lead to a complete service outage until the system has recovered.
When category lookup requests cannot be completed, they accumulate internally. Under high load and specific timing conditions, an invalid internal state can occur during cleanup of pending WebFiltering lookups, resulting in a crash of the UTM process.
This issue applies to both NextGeneration WebFiltering (NGWF) and Enhanced WebFiltering (EWF).
This issue affects Junos OS on SRX Series:
* 23.2 versions from 23.2R2 before 23.2R2-S7.7;
* 23.4 versions from 23.4R2 before 23.4R2-S8.13;
* 24.2 versions before 24.2R2-S5.5;
* 24.4 versions before 24.4R2-S4;
* 25.2 versions before 25.2R2-S1;
* 25.4 versions before 25.4R1-S3, 25.4R2. |
| An Improper Resource Locking vulnerability in the clock synchronization daemon (clksyncd) of Juniper Networks Junos OS on MX Series allows a unauthenticated, logically adjacent attacker to cause a Denial-of-Service (DoS).
If a SyncE or PTP upstream node sends a malformed message to an MX device equipped with SCBE3, a false 19.44MHz alarm is generated on the master RE. This leads to persistent RE switchovers and a clksyncd process crash. This issue is outside the attacker's direct control as it's a race condition.
This issue affects Junos OS on MX Series:
* All versions before 23.2R2-S7.7;
* 23.4 versions before 23.4R2-S8.13;
* 24.2 versions before 24.2R2-S5.5;
* 24.4 versions before 24.4R2-S4;
* 25.2 versions before 25.2R2-S1;
* 25.4 versions before 25.4R1-S2. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/userptr: Hold notifier_lock for write on inject test path
When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit()
runs vma_check_userptr() with the svm notifier_lock taken for read. The
test injection causes vma_check_userptr() to call
xe_vma_userptr_force_invalidate(), which feeds into
xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That
flag tells drm_gpusvm_unmap_pages() the caller already holds
notifier_lock for write and only asserts the mode. Because the caller
actually holds it for read, the assertion fires:
WARNING: drivers/gpu/drm/drm_gpusvm.c:1669 at \
drm_gpusvm_unmap_pages+0xd4/0x130 [drm_gpusvm_helper]
Call Trace:
xe_vma_userptr_do_inval+0x40d/0xfd0 [xe]
xe_vma_userptr_invalidate_pass1+0x3e6/0x8d0 [xe]
xe_vma_userptr_force_invalidate+0xde/0x290 [xe]
vma_check_userptr.constprop.0+0x1c6/0x220 [xe]
xe_pt_svm_userptr_pre_commit+0x6a3/0xc60 [xe]
...
xe_vm_bind_ioctl+0x3a0a/0x4480 [xe]
Acquire notifier_lock for write in pre-commit when the inject Kconfig
is enabled, via new helpers xe_pt_svm_userptr_notifier_lock()/_unlock().
Rename xe_svm_assert_held_read() to
xe_svm_assert_held_read_or_inject_write() so it asserts the correct
mode under each build configuration. Production builds
(CONFIG_DRM_XE_USERPTR_INVAL_INJECT=n) keep the existing read-mode
behavior bit-for-bit.
(cherry picked from commit 80ccbd97ffee8ad2e73167d826fe7be548364365) |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Implement a crw lock
Unlike the channel_program struct, which covers synchronous I/O
submissions and asynchronous interrupts, the CRW region relies
exclusively on asynchronous events coming from hardware.
Implement a lock to manage the list of those payloads, to ensure
they are read cohesively. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock
Locking is disabled in the regmap config as this driver uses its own
lock. This means that all calls to regmap functions (read or write) must
hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do
this, and it was therefore possible that multiple threads could cause an
incorrect register to be read/written.
A previous patch partly fixed this, but only protected the write to the
interrupt mask register, and not the read from the direction register. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix race condition on rdma->state in trans_rdma.c
The rdma->state field is modified without holding req_lock in both
recv_done() and p9_cm_event_handler(), while rdma_request() accesses
the same field under the req_lock spinlock. This inconsistent locking
creates a race condition:
- recv_done() running in softirq completion context sets
rdma->state = P9_RDMA_FLUSHING without acquiring req_lock
- p9_cm_event_handler() modifies rdma->state at multiple points
(ADDR_RESOLVED, ROUTE_RESOLVED, ESTABLISHED, CLOSED) without
req_lock
- rdma_request() uses spin_lock_irqsave(&rdma->req_lock, flags) to
protect the read-modify-write of rdma->state
The race can cause lost state transitions: recv_done() or the CM
event handler could set state to FLUSHING/CLOSED while rdma_request()
is concurrently checking or modifying state under the lock, leading to
the FLUSHING transition being silently overwritten by CLOSING. This
corrupts the connection state machine and can cause use-after-free on
RDMA request objects during teardown.
Fix by adding req_lock protection to all rdma->state modifications in
recv_done() and p9_cm_event_handler(), matching the pattern already
used in rdma_request(). Use spin_lock_irqsave/spin_unlock_irqrestore
in the CM event handler since it can race with recv_done() which runs
in softirq context.
Tested with a kernel module that races two threads (simulating
rdma_request and recv_done/CM handler) on rdma->state with proper
locking: 5.5M+ FLUSHING writes over 27M iterations with 0 lost
transitions. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI
The MIPI DSI and CSI domains share control bits for clock and reset, which
can lead to incorrect behavior if one domain disables the shared resource
while the other is still active.
To fix the issue, introduce a shared MIPI PHY power domain to own the
common resources and make DSI and CSI its subdomains. This ensures the
shared bits are properly managed and not disabled while still in use. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use uninterruptible resv lock for plane updates
virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock
the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and
ignore its return value. The function can fail with -EINTR from
dma_resv_lock_interruptible() (signal during lock wait) or with
-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),
leaving the resv lock not held. The queue path then walks the object
array and calls dma_resv_add_fence(), which requires the lock held;
with lockdep enabled this trips dma_resv_assert_held():
WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840
Call Trace:
virtio_gpu_array_add_fence
virtio_gpu_queue_ctrl_sgs
virtio_gpu_queue_fenced_ctrl_buffer
virtio_gpu_cursor_plane_update
drm_atomic_helper_commit_planes
drm_atomic_helper_commit_tail
commit_tail
drm_atomic_helper_commit
drm_atomic_commit
drm_atomic_helper_update_plane
__setplane_atomic
drm_mode_cursor_universal
drm_mode_cursor_common
drm_mode_cursor_ioctl
drm_ioctl
__x64_sys_ioctl
Beyond the WARN, mutating the dma_resv fence list without the lock
races with concurrent readers/writers and can corrupt the list.
Both call sites run inside the .atomic_update plane callback, which
DRM atomic helpers do not allow to fail (by the time it runs, the
commit has been signed off to userspace and there is no clean
rollback path). Moving the lock acquisition to .prepare_fb was
rejected because the broader lock scope deadlocks against other BO
locking paths in the same atomic commit.
Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses
dma_resv_lock() instead of dma_resv_lock_interruptible(). This
eliminates the -EINTR failure mode -- the realistic syzbot trigger
-- without extending the lock hold across the commit. The helper
locks a single BO and rejects nents > 1 with -EINVAL; both fix
sites lock exactly one BO.
Use it from virtio_gpu_cursor_plane_update() and
virtio_gpu_resource_flush(); check the return value to handle the
remaining -ENOMEM case from dma_resv_reserve_fences() by freeing
the objs and skipping the plane update for that frame. The
framebuffer BOs touched here are not shared with other contexts
and lock contention is expected to be brief, so the loss of
signal-interruptibility is acceptable.
Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)
continue to use the interruptible variant.
The bug was reported by syzbot, triggered via fault injection
(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the
-ENOMEM branch in dma_resv_reserve_fences(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: move to two-stage removal scheme
Like previous patches for x_tables, follow same pattern in ebtables.
We can't reuse xt helpers: ebt_table struct layout is incompatible.
table->ops assignment is now done while still holding the ebt mutex
to make sure we never expose partially-filled table struct. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()
l2cap_chan_close() removes the channel from conn->chan_l, which
must be done under conn->lock. cleanup_listen() runs under the
parent sk_lock, so acquiring conn->lock would invert the
established conn->lock -> chan->lock -> sk_lock order.
Instead of calling l2cap_chan_close() directly, schedule
l2cap_chan_timeout with delay 0 to close the channel
asynchronously. The timeout handler already acquires conn->lock
and chan->lock in the correct order.
The timer is only armed when chan->conn is still set: if it is
already NULL, l2cap_conn_del() has already processed this channel
(l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb),
so there is nothing left to do. If l2cap_conn_del() races in
after the timer is armed, __clear_chan_timer() inside
l2cap_chan_del() cancels it; if the timer has already fired, the
handler returns harmlessly because chan->conn was cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: fix potential UAF in SSP passkey handlers
hci_conn lookup and field access must be covered by hdev lock in
hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise
the connection can be freed concurrently.
Extend the hci_dev_lock critical section to cover all conn usage in both
handlers.
Keep the existing keypress notification behavior unchanged by routing
the early exits through a common unlock path. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: move wait_on_sem() out of spinlock
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix locking usage for tcon fields
We used to use the cifs_tcp_ses_lock to protect a lot of objects
that are not just the server, ses or tcon lists. We later introduced
srv_lock, ses_lock and tc_lock to protect fields within the
corresponding structs. This was done to provide a more granular
protection and avoid unnecessary serialization.
There were still a couple of uses of cifs_tcp_ses_lock to provide
tcon fields. In this patch, I've replaced them with tc_lock. |
| Improper synchronization in the OpenVPN ovpn-dco-win for Windows versions 0.6.5 through 1.3.5 and 2.4.0 through 2.8.7 allows local attackers to trigger a deadlock via a crafted write to the ovpn-dco device, causing the host to become unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Always use the IRQ-safe variant when acquiring the fence lock
Since dma_fence objects can be shared with other subsystems, they may be
accessed from hardirq context in those drivers, and we have to take
that into account by also using the IRQ-safe variant when acquiring
the lock.
While at it, switch to the guard model. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Drop the lock in skb_may_tx_timestamp()
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: read sk->sk_family once in inet_recv_error()
inet_recv_error() is called without holding the socket lock.
IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM
socket option and trigger a KCSAN warning. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lock the socket in sock_gettstamp()
sk->sk_flags must only be changed while holding the socket lock,
because sock_set_flag() and sock_reset_flag() use non atomic
operations (__set_bit() and __clear_bit()).
sock_gettstamp() is one of the last places where a bit of sk->sk_flags
is changed from a syscall without owning the socket lock, through
sock_enable_timestamp(sk, SOCK_TIMESTAMP).
sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags
without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp,
sunrpc, wireguard) need a careful audit, this will be addressed in a
separate patch.
Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free
caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind()
can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set,
because both threads perform a read-modify-write on the same word.
CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW)
-------------------------------- ----------------------------
read sk_flags = F read sk_flags = F
compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMESTAMP)
store F | BIT(SOCK_RCU_FREE)
sk_add_node_rcu(sk, ...)
store F | BIT(SOCK_TIMESTAMP)
After the lost update, SOCK_RCU_FREE is clear while the socket is
visible to lockless UDP receive lookups. sk_destruct() then frees
the socket immediately instead of waiting for a RCU grace period,
while the receive path still holds a reference-less pointer to it:
BUG: KASAN: slab-use-after-free in ipv4_pktinfo_prepare+0x30/0x410
Read of size 8 at addr ffff888008806610 by task exploit/207
CPU: 0 UID: 1000 PID: 207 Comm: exploit Not tainted 6.12.95+ #1
ipv4_pktinfo_prepare+0x30/0x410
udp_queue_rcv_one_skb+0x51c/0x1180
udp_unicast_rcv_skb+0x109/0x350
ip_protocol_deliver_rcu+0x14b/0x310
ip_local_deliver_finish+0x29d/0x390
ip_local_deliver+0x24d/0x2a0
Only grab the socket lock when SOCK_TIMESTAMP has to be set,
to keep the common case lockless. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix race between deleting interface and adding new peer
While deleting an existing ovpn interface, there is a very
narrow window where adding a new peer via netlink may cause
the netdevice to hang and prevent its unregistration.
It may happen during ovpn_dellink(), when all existing peers are
freed and the device is queued for deregistration, but a
CMD_PEER_NEW message comes in adding a new peer that takes again
a reference to the netdev.
At this point there is no way to release the device because we are
under the assumption that all peers were already released.
Fix the race condition by releasing all peers in ndo_uninit(),
when the netdevice has already been removed from the netdev
list.
Also ovpn_peer_add() has now an extra check that forces the
function to bail out if the device reg_state is not REGISTERED.
This way any incoming CMD_PEER_NEW racing with the interface
deletion routine will simply stop before adding the peer.
Note that the above check happens while holding the netdev_lock
to prevent racing netdev state changes.
ovpn_dellink() is now empty and can be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: reject dynamic fdb entries that reference a nexthop id
The commit cited in the Fixes tag allowed VXLAN FDB entries to point to
FDB nexthops so that overlay traffic could be load balanced across
multiple VTEPs. Such entries can only be configured from user space,
cannot be learned and cannot roam. They only make sense with a user space
control plane such as E-VPN where data plane learning is disabled.
Despite that, the VXLAN driver does not currently prevent such entries
from being configured with the "dynamic" flag. The per-nexthop FDB list
is only protected by the per-device hash lock, which is not sufficient
when two VXLAN devices point to the same FDB nexthop and therefore share
the list. Aging runs in softirq context without RTNL, so an entry deleted
by one device can race with an addition or deletion from the other,
leading to list corruption:
list_del corruption. next->prev should be ffff8881069d9548, but was
dead000000000122. (next=ffff8881069d9448)
WARNING: CPU: 0 PID: 90 at lib/list_debug.c:65
__list_del_entry_valid_or_report+0x1aa/0x210
...
vxlan_fdb_destroy+0x5b8/0xad0
vxlan_cleanup+0x328/0x450
call_timer_fn+0x2a/0x1c0
run_timer_softirq+0x18c/0x210
BUG: KASAN: slab-use-after-free in vxlan_fdb_destroy
Fix this by rejecting the bogus configuration of dynamic FDB entries that
point to FDB nexthops, both when created and when an existing entry is
updated. As such, the per-nexthop FDB list is only ever mutated under the
RTNL lock. Add test cases to make sure that this does not regress in the
future. |
